Parts & Accessories

Raincover Sleeve Commute

The EVOC FRAME PAD protects the bike frame from scratches and other transport damage. - Fits most bike frames - Attachment for handlebar - Velcro straps attachment

Tool Wrap WP

Phone Pouch

The B-RAD Dogbone allows for the bottle cage to mounted off center with additional B-RAD accessories, without needing the B-RAD base. Most commonly used for smaller, curved or dual suspension frames where the slotted bases won't fit or are not needed.

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Three slots for additional adjustments over the B-RAD 2 base - Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Long, four-slotted mount allows two, smaller bottles to be mounted in-line - Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts

B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base

B-RAD Half Bottle Mounts allow for cargo customization and cargo optimization. Designed to work in tandem with B-RAD Base, the Half-Bottle Adaptor moves the bottle over about half a bottle radius to make it easier to access. The Accessory strap mounts can be mounted to the other side providing a mounting point for additional items. - Mounts to the B-Rad base mount (not included

The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads

The B-RAD pump bag protects your frame pump from water and dirt ensuring it is working when you need it. - Mounts to the B-RAD system or on its own - Dimensions: 12 in x 2.5 in x 2.5 in (30 cm x 6.5 cm x 6.5 cm)

A classic Wald design, this Flashlight Holder can clamp a standard size flashlight to your handlebar or serve as a convenient wall mount.

By using the accessory bolt mounts on a frame or fork, the Wald Standoff kit allows the user to space a basket or rack away from other components that would otherwise be in the way, like disc brake calipers. - 2 Phillips head frame bolts in 1.5-inch (38mm) length - 2 Standoff spacers in 1-inch (25.4mm) length

The Gel Fuel Rack / NDM 1 give the user the ability to reach their gels and similar snacks at any time while our on the trails. The "grab-n-pull" aspect of the rack makes it super fast for you to fuel up with new energy. The accessory is compatible with backpacks equipped with the No Dancing Monkey 1.0 and No Dancing Monkey 1.2 harnesses. This attachment is compatible with the following products: - Raw - MTB Hydro - Airborne - Ranger - Patriot - Vertical - Outlander (NOT Compatible with Outlander PRO) With the Gel Fuel Rack / NDM 1 you'll always have instant access to your gels or other small snacks. The "grab-n-pull" make it super fast to fuel up with new energy. The accessory can be attached to the harness of all backpacks equipped with the No Dancing Monkey 1.0 and No Dancing Monkey 1.2 harnesses. The accessory is simply attached to the Velcro shoulder strap. This attachment is compatible with the following products:

Replacement stays for a variety of Tubus racks. Every roundstay is made out of solid aluminum, and they are available in various lengths and offsets. - 8mm diameter stay - Drilled for M5 bolts

Mudgard Bracket for Rear Carriers

Tubus strut clamp set for attaching and adjusting front stays on Cargo and Logo rear racks. - Aluminum block with stainless steel hardware - Fits 8mm diameter stays

LM-BF 35 Fork Adapter, for forks without eyelets. Use with rigid forks* with a diameter from 25mm up to 40mm. For all Tubus lowriders except for Duo. *Please Note: Do NOT mount on suspension forks!

QR Axle Adapter with a set of adapter plates and mounting parts for assembling a rear carrier to frames without eyelets.

QuickClick mount for racing type saddles. Works with all Topeak Wedge Bags. - Material : Injected Nylon - Weight: 30g / 1.06 oz

Topeak's Cargo Net works with the Trolley Tote or MTX Rear Basket (sold separately). Make sure your goods stay in place on those bumpy rides home!

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

Keeping with the stealth ethos of the Ninja series, the Ninja Pouch+ Road conveniently holds a spare tube (up to 700 x 25c) in an inconspicuous area keeping the clean lines of your bike. Easy access to the integrated tire levers makes changing a tube a quick proposition. - Material: Cage-Engineering grade plastic; Bag-EVA foam - Cage Outer Diameter: Fits standard water bottle - Tire Levers: 2 engineering grade plastic levers - Compatibility: Up to 700 x 25c inner tube - Size: 18.5 x 10.8 x 7.8 cm / 7.3” x 4.3” x 3.1” - Weight: 101 grams - Inner tube not included

Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

The Loop Junk Strap is the same 120cm woven nylon strap with a stainless steel buckle that Surly's regular junk strap is. The Loop Style Junk Strap, however, has a loop sewn at each end of the strap so you can wrap them around small diameter tubing like that used for racks and handlebars. They secure in the middle with the stainless steel buckle. Surly made these Loop Style Junk Straps because it offers another method for those wanting to secure cargo to their racks and or bikes. Junk Straps of any kind are useful in many different situations so toss a few in your backpack and always be ready to tie something to anything else. - For general tie down use - 42" loop strap, plus 8" closure buckle strap