Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts & Accessories

$4.95
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.

$17.99
Planet Bike's Dial Gauge makes it easy to ensure you always have the right pressure in your tires, which makes the riding easy and helps prevent flats. Built to last, this quality gauge works on all valves and has a large easy-to-read dial.

$47.95
Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.

$14.99
Problem Solvers 90 degree Presta valve inflator is used to inflate disc wheels, thanks to its narrow, low-profile head.
• Presta valve
• 90 degree inflator works with most pump heads

$4.95
Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.

$16.95
Smaller Head fits every known Disc wheel made. Includes Prestacycle's newest version of the Mini Presta Head Gasket uses Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.

$5.95
Prestadapter is a lightweight Presta-to-Schrader adapter with one more great feature. The hole on the opposite side is a Presta valve core remover! Super-light Anodized Aluminum.
- Schrader to Presta valve adapter
- Presta valve core tool
- Forged alloy single piece precision machined body
- Only 1.3 grams actual weight each
- Two (2) adapters included

$5.99
Bringing Lezyne's Metal Kit along is the difference between being stranded and making it home. It contains six glueless patches, a tire boot and a stainless-steel tube scuffer. All of this is stored in a waterproof aluminum box that fits neatly in a seat bag, jersey pocket or hydration pack.

$3.50
A flat won't ruin your ride when you have Lezyne's Classic Kit. It contains 8 vulcanizing patches, glue, an emergency tire boot and a stainless-steel tube scuffer.

$40.99
350 PSI replacement pressure gauge for all floor pumps with 2.5-inch gauges, includes glue and O-ring. Highly precise with a 1.5-inch screen and two-button system for easy use.

$26.99
Lezyne's ABS Pen Gauge is a replacement flex hose with an integrated, in-line psi/bar pressure gauge with easy to read markings. It is stored inside the handle of Flex Hose equipped Lezyne hand pumps (Medium and Large sizes only, sold separately), and is equipped with the ABS Flip Thread Chuck which threads onto Presta and Schrader valves for a secure connection.

$21.99 - $27.99
Use Bontrager's Presta Valve Extenders with a deep section wheel and you'll always be able to keep things properly pumped. They must be used with a removable valve core tube.

$4.95
Topeak Pump replacement parts and accessories. Includes all parts needed to rebuild TwinHead pumps.

$70.00
Years ago while Josh was working with the Team CSC at the Dauphine Libere, he noticed one of their mechanics using the most amazing little chuck to manage the disc wheel inflation. Unlike anything he had seen before, it was all metal and used a 'lollipop' lever on the side to lock onto the valve stems in disc wheels. The mechanic explained that these were made in Japan and were coveted by all the Euro-Pro mechanics due to their scarcity. So Josh set out to improve the design and make it available to cyclists everywhere.
- Full metal construction, guaranteed for 25 years and covered by SILCAShield
- Can effectively seal on valve stems as short as 10mm!
- Uses SILCA 254 High-Tech Elastomer gasket
- Adjustable gasket pre-load allows for a custom fit on any valve as well as compensation for gasket wear
- Male Schrader thread fits into any Schrader chuck, or use SILCA Thread-On Schrader Adapter to fit a bare hose
- Bullet-proof high-pressure, disc-compatible chuck for high-pressure situations.

$29.95 - $39.95
Coil hose made is USA is superior to imported coil hoses. Rated for high pressure and durability. Brass swivel ends on both ends of the hose. Standard 1/4” NPT threads.
Narrow hose increases strength and reduces waste when using Nitrogen. Short length hose recommended when your inflation source is close to your work or is portable and is usually moved to your work. Great for Nitrogen and small portable Air Compressors. Vibraseal coated threads, no thread tape or sealant needed!

$9.99
Want a super-easy way to fix a flat? If you have tubeless tires on your mountain bike, all you need is Genuine Innovations' Tubeless Tire Repair Kit. No interior repair is needed, so you don't have to remove the tire. Just plug the hole with the self-vulcanizing plugs, inflate and ride away. The kit includes an insertion tool and five rope plugs.

$22.95
A Schrader valve adapter allows using the JoeBlow Ace floor pump for quickly pumping forks and rear shocks. Built-in air release knob allows fine tuning air pressure.

$17.95
Tri-BackUp series is a complete system that Topeak has carefully integrated storage, hydration and repair into one solution for triathletes. The Tri-BackUp Air Station is an adapter for mounting a CO2 inflator, CO2 cartridges, and a mini pump.
- Material: Engineering grade plastic
- Compatibility: HybridRocket RX, RaceRocket HP Carbon, RaceRocket HP, Micro AirBooster, - Two 16g CO2 cartridge
- Mount: Works w/ TRI-BackUP Elite / Pro V / Pro I
- Size: 10.3 x 8.6 x 3.3 cm / 4.1” x 3.4” x 1.3”
- Weight: 30 grams / 1.06 oz
*Mini pump, CO2 inflator, CO2 cartridges & Tri-Cage not included

$20.00
n partnership with the rubber and tire experts at Continental , we are offering a custom extruded 3/16" ID air hose compatible with all historic PISTA Handles.

$16.95
Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.
Page 1 of 3
Next page