Tools

A great way to make cleaning easier is to remove your wheels. While this may seem excessive, removing the wheels from your bike opens up many tight areas that are tough to clean, allowing easier access and better visibility of these surfaces. The Pedro's Chain Keeper was designed with this wheels-off technique in mind and makes sure your chain stays off your frame, preventing damage and keeping your drivetrain free to turn as is commonly needed during cleaning. Try it out! The Chain Keeper inserts into the right rear dropout when the wheel is removed for cleaning, storing, or transporting your bike. The quick-release lever allows for fast and easy installation and removal.

- Durable double-ended brush - Ideal for chains, cogs, derailleurs, and chainrings. - Recommended for use with Pedro's cleaner and degreaser products. - Solvent resistant synthetic handle and bristles. - Not recommended for oral use. Pedro's Toothbrush is designed to tackle the drivetrain and is ideal for cleaning chains, cogs, derailleurs, and chainrings. The ergonomic handle is paired with two purpose built brush features. The tapering length bristles up front are designed to scrub the intricate surfaces of chains, chainrings and cassettes while at the opposite end, longer, stiffer, larger-diameter bristles reach deep between the cassette cogs removing even the deepest dirt and grime. The Pedro's Toothbrush can also be a great tool for applying degreaser to drivetrain parts. While holding the Toothbrush flat with the bristles out to the side, pour degreaser to the bristles. Then quickly move the toothbrush to the drivetrain and apply the degreaser using a light scrubbing motion. This technique works especially well with Pedro's Degreaser 13.

The hex wrench is the most common tool needed for the modern bicycle. Choosing the right set can make the difference between good day and a bad day working on bikes. Pedro's L Hex Wrench Set is up to the challenge. They made these wrenches from heat-treated SNCM-V alloy steel to ensure superior strength and long-lasting performance. Pedro's hex wrenches also feature extra length and a round-style end for better leverage and easy access and handling of hard-to-reach bolts. The set includes all the sizes you need in a convenient holder. - Made from heat-treated SNCM-V alloy steel to ensure long-lasting performance - Extra length provides great leverage and access to hard-to-reach bolts - Includes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, & 10mm sizes in convenient holder

Bit and Socket Set for Pedro's Torque Wrenches Pedro's Pro Bit and Socket Set is designed to work with our torque wrenches, offering a full range of tools for the professional mechanic's hex, Torx, socket, and pedal needs. - Extensive set is the perfect companion for your Pedro's torque wrenches. - Includes 17 hex and Torx bits, 10 sockets, a crowfoot pedal wrench, and 3 drive adapters stored in a foam holder. - Premium S2 tool steel bits, chrome vanadium sockets, and precision laser-cut tool steel crowfoot ensure strength and lasting performance. Set includes: - Hex 2, 2.5, 3, 4, 5, 6, & 8mm (25mm), 4 & 5mm (50mm), 10mm (65mm, 3/8" drive) - Torx T10, T15, T20, T25, & T30 (25mm), T25 & T30 (50mm) - Sockets 8, 9, 10, 11, 12, 13mm (1/4" drive), 14, 15, 17, 19mm (3/8" drive) - Crowfoot 3/8" Drive 15mm Pedal Wrench - Drive Adapters 1/4" square to 1/4" hex, 1/4" hex to 1/4" square, & 3/8" square to 1/4" hex

If you are looking for the absolutely strongest, most bad-ass tire lever, perfect for the toughest downhill and freeride tires, you've come to the right place. Pedro's downhill tire lever features heat-treated tool steel construction for unmatched strength and reliability, 275mm (10.8") length for incredible leverage, a large shovel tip that holds tight on the bead, a smooth curved shape with polished finished to protect tires and rims, and an ergonomic dual density screw driver style handle providing comfort and security. - Heat-treated tool steel construction for unmatched strength - 275mm length for incredible leverage on tough downhill and freeride tires - Large shovel tip holds tight on bead while smooth finish protects tire and rim - Ergonomic handle provides comfort and security

Socket Tool for Four-Notch BMX/Single-Speed Freewheels - Made from heat-treated tool steel for the ultimate in strength and lasting performance. - Professional quality, precision sized for the perfect fit. - Fits all four-notch BMX/single-speed freewheels for hubs with 1.37 x 24 TPI threads. - Designed to work with Pedro's snap-channel Pro Socket Handle, a 24mm socket or wrench, or in a bench vise. Pedro's socket tools provide a professional quality, precision fit tools required to properly install, remove, and adjust modern drivetrain components. Pedro's designed each socket tool to fit perfectly, protecting the component and ensuring simple and safe usage for the mechanic. The Freewheel Socket is designed to fit over axles up to 14mm and work seamlessly with Pedro's snap-channel Pro Socket handle, any 24mm socket/wrench, or in a bench vise. Backed by Pedro's lifetime warranty.

Any fastener with a name like star fangled nut was destined to cause headaches. Most mechanics have battled with troublesome star nuts and know having the right tool makes a world of difference. The Star Nut Setter II was designed to make star nut installation quick and easy. Compatible with 1" and 1 1/8" steerer tubes, the Star Nut Setter II features a guide that surrounds the steerer providing perfect alignment and perfect depth every time. The compact size and new lighter weight aluminum guide component are perfect for the tool box while the tool steel driver, with updated ergonomics, ensures lasting performance. Backed by Pedro's lifetime warranty. - Updated design features lightweight aluminum guide and improved ergonomics. - Quickly and easily installs star nuts in 1" & 1-1/8" threadless steerers. - Included guide surrounds steerer for perfect alignment and installation depth every time. - Small, compact size is perfect for the tool box.

Bushings and spacer designed for use with Pedro's Headset and Bearing Press. - Includes ten precision-machined bushings in 6 sizes covering installation of all road, mountain, and BMX press-fit bottom brackets cups and bearings, plus a BB Bushing Spacer for enhanced flexibility, speed, and alignment - Bushings and spacer designed for use with Pedro's Headset & Bearing Press ensuring precise and accurate installation. Inner diameter of 18.4mm (14mm for 19-37 and 19-41) - EVA foam packaging insert keeps the bushings protected, organized, and ready for use

- 80 gram, 6-function multi-tool. - Made from heat-treated tool steel for strength and lasting performance. - Small ergonomic design fits anywhere but performs like full size chain tool. - Includes 5mm hex wrench, flathead screwdriver and 1-11 speed chain tool with integrated 3.2, 3.3, and 3.5 mm spoke wrenches and slot behind chain tool anvil is a perfect Presta valve core wrench. The right multi-tool can be the difference between finishing the most epic ride of your life and going for the longest walk of your life carrying a busted bike. Pedro's has drawn upon its experience making professional shop tools to make sure you finish that epic ride. Pedro's Six-Pack Chain Tool is a super compact, professional quality, minimalist multi-tool great on its own or as a supplement to other multi-tools lacking a chain tool or spoke wrenches. The Six-Pack Chain tool is made from heat-treated tool steel for strength and lasting performance. The small ergonomic design fits almost anywhere but performs like a full size chain tool. The Six-Pack Chain Tool Multi-Tool weighs 80 grams and has 6 functions including 5mm hex key, a flat blade screwdriver, and shop quality 1-11 speed chain tool with integrated 3.2, 3.3, and 3.5mm spoke wrenches, and slot behind chain tool anvil is a perfect Presta valve core wrench. Backed by Pedro's lifetime warranty.

- Made from heat-treated tool steel for the ultimate in strength and lasting performance. - Professional quality, precision sized for the perfect fit. - Fits all Campagnolo cassette lockrings and Record, Chorus, Centaur, and Athena bottom brackets. - Designed to work with Pedro's snap-channel Pro Socket Handle, a 24mm socket or wrench, or in a bench vise. Pedro's socket tools provide a professional quality, precision fit tools required to properly install, remove, and adjust modern drivetrain components. Pedro's designed each socket tool to fit perfectly, protecting the component and ensuring simple and safe usage for the mechanic. The Campy BB and Cassette Socket is designed to fit over Campagnolo bottom bracket spindles and work seamlessly with Pedro's snap-channel Pro Socket handle, any 24mm socket/wrench, or in a bench vise. Backed by Pedro's lifetime warranty.

- Takes place of rear wheel providing tension on chain to protect the frame when rear wheel is removed for cleaning, storage, or transport. - Allows full forward or backward rotation of drivetrain and shifting through full range of gears. - Quick and easy one-handed installation on standard QR style dropouts and removable pulley wheel works directly on 12mm thru axles. - Professional grade stainless-steel, aluminum, and solvent resistant plastic components ready for daily life in the wash bucket. The original Pedro's Chain Keeper has been a favorite in the wash buckets of mechanics for decades. The new Pro Chain Keeper carries this heritage forward to new levels featuring one-handed installation, shifting across all gears, professional duty stainless-steel and aluminum construction, a heavy-duty solvent resistant plastic pulley, and 12mm thru axle compatibility.

Recently named VeloNews Editor's Pick for Best 3-Way Wrench, Pedro's popular Y-Wrenches feature heat-treated tool steel construction and durable plastic body for strength and long-lasting performance. The ergonomic shape provides excellent leverage and easy handling.

The Chain Pig II hands-free chain cleaner will change the way you think about cleaning your chain. Just one use with Pedro's latest solvent-free degreasers and you too will become a believer just as so many riders and skeptical pro mechanics have. The Chain Pig II provides a simple, efficient, and effective way to clean the chain without making a mess or wasting valuable degreaser. Each element has been designed to outperform and outlast the competition. The upper and lower bodies are made from super-strong, chemical and impact-resistant plastic and new Chain Pig II features stainless steel button arms, along with other improvements, to further increase durability. The brush wheels, which have the toughest job in any chain cleaner, feature larger diameter bristles optimized for stiffness, effective cleaning performance, and superior durability. The drag-free derailleur hook is a game-changer providing simple use, real hands-free operation, and alignment allowing seriously high run speeds that increase effectiveness and efficiency. The Chain Pig II has also been designed for efficient cleaning and degreaser usage. The system allows effective cleaning using only 1 fluid ounce of degreaser. The stage one brushes effectively pull degreaser up from the reservoir and onto the chain. The chain is then scrubbed from all angles and finally pulled through a large durable sponge that wicks excess and contaminated fluid from the chain minimizing mess and dripping. The sponge also wipes the chain, filtering larger contaminants, and returning usable degreaser back for more cleaning. - Pro-grade brushes and super absorbent sponge eat chain grime for breakfast, and are always hungry for more - Surgically enhanced with stainless steel hardware and body sculpting ready for epic drivetrain battles - Innovative quick-lock closure and drag-free derailleur hook for easy use and hands-free operation - Lean and mean, this hog requires only 1oz of degreaser

- Perfect companion for your Pedro's torque wrench - Bits made from premium S2 tool steel to ensure strength and lasting performance - Includes 16 hex and torx bits and 2 drive adapters in convenient holders - 50mm length bits in key sizes ensure component compatibility Pedro's Hex Bit Set II is designed to work with our torque wrenches offering an extensive range to handle most hex and torx needs. The set includes longer 50mm bits in key sizes to ensure compatibility and fit with all components where standard 25mm bits fall short. Bits are made from premium S2 tool steel for strength and lasting performance. Set includes: - Hex: 2, 2.5, 3, 4, 5, 6, & 8mm (25mm), 4 & 5mm (50mm) - Torx: T10, T15, T20, T25, & T30 (25mm), T25 & T30 (50mm) - Drive Adapters: 1/4-inch square to 1/4-inch hex & 1/4-inch hex to 1/4-inch square

- Premium combination ratcheting box-end/open end wrenches set. - Durable, forged steel construction features 6-point, 72-tooth ratcheting mechanism. - Includes: 8, 9, 10, 11, 12, 13, 14, and 15mm sizes in storage pouch. The Pedro's Ratcheting Combo Wrench Set features beautiful, compact, and durable spanner wrenches. The forged and polished wrenches feature a convenient combination of six point, 72-tooth ratchet box-end and offset open-end. Backed by Pedro's lifetime warranty.

- Fits all 16-notch x 44mm external bearing bottom bracket cups and updated design also fits 16-notch x 44mm disc brake lockrings and Shimano TL-FC24 and TL-FC25 adapters. - Updated design features a square 3/8" drive. Also works with Pedro's snap-channel Pro Socket Handle, 24mm socket or wrench, or in a bench vise. - Professional quality, precision sized for the perfect fit. Pedro's socket tools provide the professional quality, precision fit tools required to properly install, remove, and adjust modern drivetrain components. Pedro's designed each socket tool to fit perfectly protecting the component and ensuring simple and safe usage for the mechanic. The new External Bottom Bracket Socket, 16x44 is designed to work seamlessly with Pedro's snap-channel Pro Socket handle, with any 24mm socket/wrench, with any square 3/8" drive, or in a bench vise. Fits 16-notch x 44mm external bearing bottom bracket cups including Shimano BB80, BB5700, XT BB70, BB51, and previous external bearing threaded cups. Also fits many external Threaded types for Campagnolo, Chris King, FSA MegaExo, Hope, SRAM/Truvativ GXP, Race Face X-type, Surly, Wheels, and others. The new design will now also fits disc brake rotor lockrings with 16 external notches and Shimano TL-FC24 and TL-FC25 adapters. Backed by Pedro's lifetime warranty.

Precision Bit Driver With Screwdriver Bits - Ergonomic machined aluminum body with bearing-mounted rotating cap for precision and control. - Magnetic bit drive accepts any standard 1/4" hex bit. - Internal storage for two bits. Also compatible with Multi-Torque Bit Set. - Includes JIS compatible PH#1, JIS compatible PH#2, and 5mm Flat Blade bits. Designed for speed, precision, control, and versatility the Pro Bit Driver is ideally suited to assembly and tuning, and easily adapts to different tasks. Features precision S2 tool steel bits, machined aluminum body, 1/4" magnetic hex bit drive, and bearing-mounted rotating end cap. Add the compatible Multi-Torque Bit Set to store eight additional bits on board.

Precision Bit Driver With Hex & Torx Bits - Ergonomic machined aluminum body with bearing-mounted rotating cap for precision and control. - Magnetic bit drive accepts any standard 1/4" hex bit. - Internal storage for two bits. Compatible with Multi-Torque Bit Set. - Includes 2 & 2.5mm hex, and T25 torx bits. Designed for speed, precision, control, and versatility the Pro Bit Driver is ideally suited to assembly and tuning, and easily adapts to different tasks. Features precision S2 tool steel bits, machined aluminum body, ¼" magnetic hex bit drive, and bearing-mounted rotating end cap. Add the compatible Multi-Torque Bit Set to store eight additional bits on board.

Few experiences are worse than losing a critical part during an installation or repair. Often times you spend more time trying to locate the part than the job itself! This is why Pedro's offers its Magnetic Parts Tray. The six-inch diameter bowl features an extra-powerful magnet and bright yellow color keeping small parts safe and easy to access.

Use the Crowfoot Flare Wrench on any 1/4" drive torque wrench to ensure accurate torque on delicate disc brake compression fittings. A perfect add-on for our Demi Torque Wrench. - Use with a torque wrench to accurately torque delicate hose fittings found on hydraulic disc brakes. - 1/4" square drive and 7 and 8mm flare style box wrenches - Precision laser cut and heat treated tool steel for strength and lasting performance.

Essential Tool Kit for the Home Mechanic The Starter Bench Tool Kit is designed for the aspiring mechanic looking to get started with the right professional-quality tools and room to grow as new skills are learned. - 11 professional-quality tools packed in a traditional toolbox. - Tool selection focused on essential repair, adjustment, and replacement tasks. - Perfect for the car, traveling to an event, or a home shop setup. Tool List: - Folding Hex/Screwdriver Set: 2.5, 3, 4, 5, 6, +, - - 8mm Hex Tip - T25 & T30 L Torx Wrenches - Tire Lever Pair—Yellow - Quick Link Pliers - Six-Pack Chain Tool - Pro Travel Pedal Wrench - Pro Chain Whip - Cassette Lockring Socket - Cable Cutter

- Made from heat-treated tool steel to ensure the ultimate in strength and lasting performance. - Ergonomic, cushioned grip, and high leverage design for comfort and ease of use. - Quickly and cleanly cuts brake and derailleur cables, housing, and other wires. Cable cutters are an essential tool used for some of the most fundamental elements on the bicycle. What seems like a simple tool can often be the root of frustration when poor cut quality ruins a brand new cable, crimps housing shut, or leaves strands uncut. The Pedro's Cable Cutter is an industry favorite and when put to the test against the competition and you will quickly see why. Our cable cutter is designed for years of service, for comfortable and easy usage, and with extra jaw overlap ensuring a clean cut every time. The Cable Cutter is designed for cutting steel cables (wire rope) up to 4mm in diameter. Backed by Pedro's lifetime warranty.

- Updated jaws work on track cogs, cog & bb lockrings, e-bike chainrings, and cassettes. - Updated adjustment knob features gear size indication for quick reference of the current tool setting. - Adjustable plier design securely locks in place ensuring positive engagement and preventing slippage. - Fits 9-23 tooth gear sizes and 40-46mm OD lockrings with opposing notches. Compatible with all multi-gear cassettes and all standard width cogs and e-bike chainrings. Visit pedros.com/chainfit for the latest compatibility information. The Vise Whip is simply a better solution for holding your cassette during removal and now also works on track cogs, cog & bb lockrings, and e-bike chainrings. This innovative tool was developed by Pedro's in close collaboration with legendary frame builder and cycling technical author Lennard Zinn. The Vise Whip is beautifully simple to use. Once you try it, you'll never go back to a chain whip again.

- Designed to work with Pedro's 24mm snap-channel bottom bracket, freewheel, and cassette sockets. - New dual-side design accepts 25.4mm (1 inch) bottom bracket, freewheel, and cassette sockets. - Features heat-treated tool steel construction, a long handle for leverage, and cushioned grip for comfort. - Pair with the Pedro's BB Socket Holder to remove event the toughest bottom bracket cups without worry of slipping or injury. Adjustable wrenches just don't cut it sometimes and especially not when you are dealing with a stubborn bottom bracket cup. The Pedro's Pro Socket Handle 2.0 is designed to work with Pedro's 24mm snap-channel bottom bracket, freewheel, and cassette sockets. In addition the Pro Socket 2.0 now accepts all 25.4mm (1 inch) socket tools as well. Backed by Pedro's lifetime warranty.

Universal spoke wrench designs are generally known for their low quality and awkward shape. The Pedro's Multi Spoke Wrench breaks this mold providing a shop quality spoke wrench in a compact, simple, ergonomic unibody design that feels good in your fingers and is perfect for the toolbox. Includes the three most common sizes. - Made from heat-treated tool steel for strength and long-lasting performance - Fits 3.2, 3.3, and 3.5mm spoke nipples

Socket Tool For Shimano® and ISIS Drive® Splined 20-Tooth BB Cups - Fits all Shimano® and ISIS Drive® splined 20-tooth bottom bracket cups and other cartridge bottom brackets. - Updated design features a square 3/8" drive. Also works with Pedro's snap-channel Pro Socket Handle, 24mm socket or wrench, or in a bench vise. - Professional quality, precision sized for the perfect fit. Pedro's socket tools provide the professional quality, precision fit tools required to properly install, remove, and adjust modern drivetrain components. Pedro's designed each socket tool to fit perfectly protecting the component and ensuring simple and safe usage for the mechanic. The updated Splined Bottom Bracket Socket features a square 3/8" drive. The socket also works with Pedro's snap-channel Pro Socket Handle, 24mm socket or wrench, or in a bench vise. For tough bottom bracket jobs, make sure to check out the BB Socket Holder designed to help hold the Splined Bottom Bracket Socket in place. The 20-tooth pattern fits a variety of cartridge style bottom brackets that feature square taper, Octalink®, ISIS Drive™, and other similar spindles including models from FSA®, Shimano®, Truvativ®, Race Face®, and others.