Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Workstands

Park Tool Deluxe Home Mechanic Repair Stand w/105-5D Clamp
$369.95
Park's Deluxe Home Mechanic Repair Stand is an awesome portable stand that's as useful while traveling as it is at home. This versatile stand features Park's shop-quality Micro-Adjust Clamp that handles round and aero seatposts and frames from 7/8-inch to 3-inches in diameter and clamps securely with its quick-release cam and handle that fine-tunes the tension. The clamp also has protective rubber jaws and built-in slots for cables. Plus its jaws are only 2.7 inches tall so they easily fit in narrow areas, like on seatposts that aren't raised much. The Deluxe Stand also boasts a stable base and the top telescopes for putting the bicycle right where you need it to get your work done efficiently. Plus, you can also rotate bicycles 360 degrees and the stand folds for easy carrying and storage.
Park Tool Deluxe Home Mechanic Repair Stand w/105-C Clamp
$429.95
Park Tool's Deluxe Home Mechanic Repair Stand is a heavy-duty folding stand with your choice of shop quality clamps. Perfect for heavier duty home use or portable shop use, the PCS-4 features a rock-solid, four-point leg system that folds together for storage, steel powder-coated tubing, and a composite horizontal tube. • PCS-4-1 uses the 100-5C Adjustable Linkage Clamp. • Clamp rotates 360º and is adjustable in height up to 67” (170cm) • Adjusts quickly from 55" to 72" • Approximate weight 26 lbs (11.8 kg) NOTE: The maximum weight holding capacity of the PCS-4 is 45 kg (100 lb.). However, this assumes the weight is centered over the legs.
Topeak FlashStand
$59.95
Topeak's FlashStand is a super work/display stand that folds up to become extremely portable as well! This affordable two-footed wonder supports your bike at the bottom bracket and down tube and raises the rear wheel with two adjustable-height feet. Take it along in the trunk of your car to dial-in your ride before your next adventure!
Topeak PrepStand Elite
$319.95
A pro-level work stand with a built-in closable small parts bin. Stable tripod design folds down small for travel or use at the races. Additional clamp lever for tightening/releasing the clamp with ease. Clamp Head: Non-marring rubber jaws, 360° rotation Clamp Height: 107cm to 178cm (42" – 70") Clamp Opening: 1.9cm to 4.5cm (0.75" – 1.8") Folding: Two QR clamps Base: HD folding 6061 T6 tubes Max Weight Capacity: 25kg / 55lb Added Features: Carry bag, Rubber base feet, Clamp lever, Closable small parts bin Size: 17.8 x 117cm / 7.0" x 46.0" (Folded); 135cm / 53.1" (Base Diameter) Weight: 6kg / 13.23lb
Unior BikeGator
$499.99 - $529.99
- The bike repair stand is the basic working tool both for service workshops and cycling enthusiasts - Maximum load capacity is 30kg - Weight of the stand without tool tray is 5.7kg
Topeak Prepstand Pro
$399.95
A pro level workstand with a built-in digital weight scale. Stable tripod design folds down small for travel or use at the races. Additional clamp lever for tightening / releasing the clamp with ease. Clamp Head Non-marring rubber jaws 360° rotation Digital weight scale Clamp Height 122 cm to 183 cm (48” - 72”) Clamp Opening 1.9 cm to 4.5 cm (0.75” - 1.8”)
Kuat Tri-Doc
$89.00
For anyone who doesn’t want to be confined to parking lots or trailheads — adventurers, racers, and garage mechanics — Küat designed the Tri-Doc for you. Tri-Doc offers an affordable way to turn your NV 2.0 into a travel stand. Reliable tri-leg design creates a stable platform for needed tune-ups or repairs. Aluminum construction finished with polished anodizing pairs perfectly with your NV 2.0. - Portable telescoping design - Quick setup - Pairs with your NV 2.0 Trail Doc - Anodized finish reflects NV 2.0 - Rubber feet offer additional stability and protection
Topeak LineUp Stand
$99.95
Topeak's LineUp Stand securely holds your bike by the rear wheel for storage or display. Its spring-loaded arm automatically adjusts to fit wheels from 20-inches to 29-inches in diameter. Use it at home to store your bike, or use it to hold your pit bike at your next cross race!
Park Tool Travel and Storage Bag for PRS-15
$25.95
The Travel and Storage Bag is a heavyweight nylon bag with a shoulder strap. This bag is designed for transporting and storing your Park Professional Race Stand. It makes travel easy and convenient, while also protecting your stand.
Park Tool Floor Mounting Plate
$35.95
Permanently and securely attach your Park Tool Repair Stand (sold separately) to the floor of your shop with Park's Floor Mounting Plate. Made with an 8" square of steel, it attaches to the stand with four bolts, which are included.
Park Tool Work Tray
$42.95
Keep your most-needed bike repair tools and supplies close at hand with Park's Work Tray. It easily installs on your Park PRS-15, PRS-10, or PRS-11 Repair Stand (sold separately). And it features 2 separate compartments, a lube holder, a tool/towel bar, a tab system that holds plastic grocery bags and 2 receiver pods for extra accessories.
Park Tool Replacement Clamp Covers
$9.90 - $18.95
Everyone wears out their Park Tool work stand clamp covers at some point. Find replacement covers for yours here. Each cover is constructed of soft, durable composite rubber. See below to determine which covers fit your Park Tool stand clamp: - 1002: fits 100-3X and 100-5X extreme range clamps - 1185: fits clamps on the repair stands PCS-9, PCS-10, PCS-11, and PCS-12 - 1259: fits 100-4X, 100-6X, 100-7X, and 100-15X clamps - 1960: fits 100-3D, 100-5D, and 100-25D Professional Micro Adjust Repair Stand Clamps - 468B: fits clamps with double cable reliefs, including 100-3C, 100-5C, 100-8C, 100-8Y, and 100-9C clamps - 467B: fits clamps with single cable relief, including PRS-2 through PRS-8 (for older-style clamps, non-current) - 468G: fits PCS-1 and PCS-2 clamps with double cable reliefs (clamp models: 100-1C, 100-1CA, and 100-2C) - 467G: fits PCS-1 and PCS-2 clamps with single cable relief (for older PCS-series stands only; not for current model stands) - 466: Rubber Replacement Clamp Cover Set (fits older clamps with plastic-dipped jaws)
Bontrager Universal Repair Stand Adapter
$36.99
Bontrager's Universal Repair Stand Adapter safely holds your Trek Madone road bicycle in a traditional workstand (sold separately). It securely holds your bike in any clamp-style or screw-type repair stand. This universal adapter has replaceable inserts to accommodate different mast caps and adapters for the 2008 and 2010 Madones.
Minoura W-3100 Repair Stand with Tool Tray Set
$209.99
The W-3100 with tool tray set is a great stand for either the shop or the home mechanic. Sturdy base allows for industrial use. - Heavy-duty steel maintenance stand for home mechanics with single lever clamping operation that can hold 65 mm tubing - Legs are foldable for storing in narrow space and 360° rotatable to keep the bike at best angle - Widely spanned legs for great stability - Clamp height is fixed at 55.5 inches from floor - Clamp jaw can be rotated to hold the bike in the best position
Park Tool Mounting Post
$170.95
Mount the THS-1 Trailhead Workstation (sold separately) directly to this rigid steel post. Features: - 2-inch (5cm) square post plated then powder coated for long outdoor life - Includes THS-1 mounting fasteners - 6-inch (15cm) square base with holes to mount directly into hard surface or to Park Tool #130 Base Plate (fasteners not included) - Height: 62.25-inch (158cm) positioning cradle arms at 50.5-inch (128cm)
Park Tool Repair Kit for 100-3C and 100-5C Clamps
$24.74
Park Tool's Repair Kit features the most common replacement parts for the 100-3C and 100-5C clamps. Includes: • 118s adjusting barrel • 117s eyebolt • 121s adjusting barrel pivot • 136 nut • 116s cap screws (2) • 108s-2 pins (2) • 107s-2 pin (1) • Washers (3) • E-clips (3)
Park Tool Wheel Alignment Gauge
$57.95
For wheels to perform properly, it's important that the rims be centered over the hubs. To check this, and to make precision adjustments, Park's Wheel Alignment Gauge (also called a dishing tool) is a must. It allows you to easily check centering on road, mountain and BMX wheels from 16 to 29 inches in diameter. It works with any hub width and its innovative design even allows it to be accurately used with the tire still on the wheel. The Wheel Alignment Gauge is a necessity for every wheelbuilder.
Park Tool PCS-EXT Extension Kit for PCS-1 Repair Stand
$35.95
The PCS-EXT is an extension for the older pre-2001 repair stands. The kit includes a quick-release collar and extension tube to raise the working height of the stand. The PCS-EXT is required for use of the 106-AC (sold separately).
Park Tool PRS-33 Electronics Upgrade Kit
$88.99
Includes a new tray/motor shroud, USB ports and oversized buttons to upgrade a Park Tool PRS-33 or PRS-33 AOK into the PRS-33.2 version controls and electronics.
Park Tool RPP-1 Repair Stand Post Protector
$19.95
The RPP-1 offers simple but effective protection for your service area. This 32" tall pad prevents damage to bikes caused by being leaned against or knocked over onto your Park Tool professional repair stand. Covered with an attractive Park Tool blue vinyl finish for easy wiping off of dirt and grease. - Compatible with Park Tool Shop Repair Stands with a 2" diameter lower post, including all generations of PRS-2 and PRS-3 - Easily removed and installed with hook-and-loop material
Unior BikeGator +
$554.99
- The bike repair stand is the basic working tool both for service workshops and cycling enthusiasts - Maximum load capacity is 30kg - Weight of the stand without tool tray is 5.7kg - The stand features a new array of precision aluminum and steel parts which offer stiffness and durability - NEW Jaw mount and rotation system - Stand is adjustable by height between 980 and 1500mm
Tacx Spider Team
$249.99
The Spider Team repair stand is developed in collaboration with pro team mechanics who work with it intensively on a daily basis. Thanks to their tips, you too can adjust, assemble, and repair in an efficient manner. The Spider Team is also suitable for different shaped bottom brackets, such as time-trial bikes, bicycles with sensors for power measurement and bicycles with electronic gearing (Shimano Di2 or Campagnolo EPS). - Extra parts included for a variety of forks - Due to its triangular profiles dirt is less likely to adhere to the surface - Anodized tubes are lightweight and resistant to detergents - Compact and easy to carry when folded - The integrated tool tray can tilt and rotate 360-degrees - Weight: 9 lbs - Maximum load: 33 lbs - Not compatible with Lefty forks
Feedback Sports Pro-Elite Repair Stand
$330.00
The Pro Elite Bike Repair Stand is the premier portable and home service partner for the most demanding bike mechanics. Its lightweight, compact, and durable design delivers unmatched stability, adjustability and portability. The patented ratchet-action closure and speed release clamp is capable of managing any bike frame, up to 85lbs (39kg) and tube diameter up to 2.6? (6.6cm). Be the most popular rider at the trailhead or in your neighborhood with the Pro-Elite Bike Repair Stand. Add a Wheel Truing Station, Bottle Opener and Team Edition Tool Kit for the ultimate service setup.
Park Tool Portable Workbench
$239.95
Perfect for taking to races and rides, the Portable Workbench is a bench that folds for easy transport and storage. It features a large work surface with specially sized slots, holes, and recesses and for holding tools, shop towels, lubes, beverages, etc. The folding steel legs provide a solid base for a toolbox and supplies, too.
Park Tool Paper-Towel Holder
$14.95
Park's Paper-Towel Holder is an accessory for Park's Professional Race Stand (sold separately). It attaches easily and holds a standard roll of paper towels. It also works great for hanging clothes, wheels and tires.
Park Tool Home Mechanic Wheel Truing Stand
$193.95
Park's Home Mechanic Wheel Truing Stand allows extremely accurate and reliable wheel truing and even building at an economical price. It's constructed from heavy-gauge steel and works with most wheel sizes and hub widths. It can be bolted to a bench for additional stability.
Park Tool Work Tray
$18.95
Park's Work Tray attaches easily to most of Park's repair stands (sold separately) to keep your tools and small parts close at hand. It has deep sides so your small items stay put and many slots for holding your tools. The Tool Tray fits Park's PRS-2, PRS-3, PRS-6, PRS-11, PRS-12, PCS-1 and PCS-4 repair stands.
Park Tool Base Plate for PRS-33
$354.95
115 pound (52kg) base plate with floor levelers for the PRS-33 Power Lift Shop Stand
Park Tool PRS-26 Team Issue Repair Stand
$409.95
The PRS-26 incorporates proven features from our other Team Issue stands to produce a strong, lightweight repair stand that's at home on-the-go or in the race pits. The sturdy tripod leg design folds and unfolds quickly and easily, and provides stability on any surface. The clamp is height-adjustable from 97 to 147 cm (38" to 58"), and can be positioned over one leg or between two legs to accommodate any bike. Precisely constructed from anodized 6063 T6 lightweight aluminum and durable composites, the PRS-26 is our lightest full-featured repair stand, and folds compactly for storage or transport. The PRS-26 is equipped with the time-tested 100-25D Micro-Adjust Clamp, the same design featured on our shop repair stands. The 100-25D features narrow clamping jaws to fit into tight areas or on short seat posts, and clamps nearly any tube from 23 to 76 mm (7/8" to 3"), including aero tubes and dropper posts. The cam-actuated adjustment system allows for quick entry, adjustment and exit. - Maximum weight capacity*: 36 kg (80 lbs.) - Clamp capacity: round and aero tubes from 22 to 76 mm (7/8" to 3") wide - Jaw width: 70 mm (2.75") - Height adjustable from 97 to 147 cm (38" to 58") - Base when open forms a triangle of 126 x 126 x 126 cm (49.6" x 49.6" x 49.6") - Weight: 5.7 kg (12.6 lbs.) - The PRS-26 uses the 100-25D Micro-Adjust Clamp - Replaceable jaw covers (part #1960) *NOTE: The maximum weight capacity of the PRS-26 assumes the bike's center of gravity is positioned directly below the clamp.
Park Tool PRS-3.3-1 w/100-3C clamp
$589.95
- 150lb holding capacity - Includes work tray (#105) (900119-01) - Base not included (900706)
Page 1 of 2 Next page