Protective/Armor

More durability. More comfort. More customized fit. Pro-Rugged Knee-Shin Guards are made with SmartFlex—body-mapped, impact-absorbing pads that offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact. So bring on more trails with sharp branches and rocks. - Extra-wide top gripper distributes pressure and keeps pads in place - Armortex technology adds durability to pads and resists tearing or catching - Soft inner foam keeps pads secure and comfortable on knees - Body-mapped, impact-absorbing SmartFlex pads - Extended coverage for shins - Adjustable fit-strap for customized comfort - Ultra-comfortable double-knit compression fabric for extra protection - CE 1621-1 certified to ensure outstanding protection - Ventilated mesh back keeps the wearer cool and dry - Machine washable - Low-profile bottom gripper keeps pads in place

A lightweight chest protector with premium hard-shell roost protection. CE tested and certified, the 3D design and adjustable waist straps offer a close fit that is comfortable as well as ventilated and works with or without a Leatt Neck Brace. Next step up in protection level is the 4.5 Chest Protector Junior with impact foam. - Total Leatt protection score of 3 points - Hard shell protector - CE tested and certified as roost protection: Chest EN14021 - Our 3D design ensures a great fit that is very comfortable - Padded base layer to prevent hard shell rubbing on skin - Close fitting allows for over or under the jersey use - Liberal venting helps keep rider cool - Recessed front/rear areas and BraceOn neck brace fitting system allow over/ under the shirt Leatt neck brace fit - Adjustable waist straps for great fit - Weight: 550g Junior fits two sizes: - Small/Medium = 134 – 146cm, 4ft 5" – 4ft 9" - Large/XX-Large = 147 – 159cm, 4ft 9" – 5ft 3"

PIVOTING HARD SHELL IMPACT FOAM PROTECTOR The Dual-Axis knee and shin guard is our top performer for a reason, not only does it have CE certified impact knee protector but also has dual pivots each side that copy the natural knee motion for the best comfort. This is the toughest guard out there! The combination of impact absorbing foam covered by a hard- shell chassis fits perfectly due to a secure and comfortable strapping system. - Has a Leatt protection score of 25, next step up in protection would be the Z-Frame knee brace. - Hard shell and 3DF ventilated impact foam - Anatomically correct, pivoting design for left and right sides ensures perfect motion - Slim shin plate that also fits inside boots - Vented plates for maximum airflow - CE tested and certified as impact protection: - Knee and shin EN1621-1 - Total Leatt protection score of 25 points - Weight: from 850g (1.87lbs) pair

This hard-shell lower arm and soft, 3DF impact foam elbow combination provides both comfort and premium protection. It's a great product for all soft pad users who are looking for a sliding, more protected lower arm but who are still looking for that soft elbow pad feel. Now with an improved sliding surface, perforated and vented sleeves, as well as a silicone-coated X-strap for that solid fit with ergonomic left/right shapes. It's CE tested and certified protection that scores a total of 13 points in the Leatt protection rating system. - Soft elbow guard with hard-shell forearm sliders - CE tested and certified as impact protection: Elbow EN1621-1 - New anti-odor MoistureCool and AirMesh wicking fabrics - Abrasion-resistant Aramid outer layer for durability - Silicone printed elbow grip - 3D design ensures a great fit that is very comfortable - Weight: from 300g (0.66lbs) pair

To protect your knees, the Delta uses DFS system foam under a polyamide soft cap, with additional padding for side impacts. The shin section uses a hard plastic shield with a soft, dual-layer foam backing. To protect your ankles from impact, EVA foam padding and polyamide hard shields are used. - Constructed from a breathable, perforated, and tough Duratex neoprene with air plush lining for maximum comfort - Sharkskin neoprene gripper to prevent pad slip - Articulated whip pads - Extra side impact padding - Ankle pad with Achilles tendon padding - Adjustable straps ensure a perfect fit - Protection Area: Knee/Full Shin - Pad Type: Hard Shell over Foam - Sold in Pairs

The Carve models manage without hard shells and are therefore light and extremely comfortable to wear. They are ideal for somewhat harder use and, with the integrated Xmatter padding concept provide high impact absorption and protection. With the Carve Evo+ iXS introduce product properties like exchangeable padding, structurally improved AeroMesh of newest generation offering a higher level of comfort and structural strength. - Xmatter Protection Foam (exchangeable) - AeroMesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort - Looplock Closings - Silicon Stopper - En1621-1:2012 Certified - Adult-sized

With the Flow Evo+ knee guard, iXS provides super thin, light and comfortable knee protectors. Developed with mountain bike legend Hans Rey, pads are super compact to fit any backpack. The integrated Xmatter padding concept provides high impact absorption and protection. With the Flow Evo+ we introduce product properties like exchangeable padding, structurally improved AeroMesh of newest generation offering a higher level of comfort and structural strength. - Xmatter Protection Foam (exchangeable) - Aeromesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort - Looplock Closings - Silicon Stopper - En1621-1:2012 Certified

Three protective layers: - Layer 1: DuraTx adds durability to pads and resists tearing or catching. - Layer 2: Body-mapped, impact-absorbing SmartFlex pads. - Layer 3: Soft inner foam keeps pads secure and comfortable - Knee sleeve has been extended with the additional protection on lower-shin - Adjustable fit-strap on knee guard for the perfect fit - New high performance, extra-wide top gripper offers optimum level of pad security and a splash of color - Ventilated mesh back keeps the wearer cool and dry - Ultra-comfortable double-knit compression fabric for extra protection - Seam-reinforced binding to improve durability - CE-1621-1 certification - Machine washable

- Body-mapped, impact-absorbing SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Ventilated SmartFlex hip pads allow airflow to keep wearer dry and comfortable - Moisture-wicking, UPF 50+ compression fabric - Side leg pocket - Machine washable - CE PPE II—15613 Impact Attenuation / 1621-1 coverage

Go-To Pedal-Friendly Knee Pads For Ce-Certified, All-Mountain Protection The Slayer Knee Pads set the standard for lightweight, pedal-friendly, and CE-certified knee-pad design. Featuring dual-density DK Impact foam and a durable Cordura outer, these pads maintain a breathable design that's light and comfortable enough for longer rides and hot weather. Their pre-curved shape and flexible foam design maintain a custom-fit feel, while silicon gripper cuffs ensure a slip-free fit. Integrated odor control helps fight the stink factor. - 1 Year Limited Warranty - Lightweight, low-profile CE-certified knee protector (EN 1621-1 Level 1) - Dual-density DK Impact energy-absorbing foam technology - Cordura abrasion resistance - Polygiene Odor Control technology - Seamless calf band and silicone gripper elastic keep pad in place - Pre-curved ergonomic patterning for enhanced fit

- Adjustable hook and loop strap closure around the calf and silicone gripper on the upper thigh provide a secure fit. - Removable D3O LP1 foam pad provides certified impact protection. - Lycra front panel and mesh rear panel for comfort and breathability. - Abrasion-resistant knee cover for durability. - Silicone patch at shin combats slippage. - Unisex size range.

- Integrated lateral hip protectors (EN 1621-1, level 1) - Protective padding on the outer thighs and on the coccyx - Comfortable waistband - Flat seams reduce friction on your skin - Odour prevention: treated with Polygiene Odor Crunch - Machine washable

Designed with valuable feedback from the 3-time EWS winner himself, the Sam Hill signature knee pads are the ultimate MTB knee pads for gravity riding, whatever your discipline. Light enough to be worn all day long, the Sam Hill knee pads mould with body heat to provide maximum comfort with a breathable mesh back panel to wick moisture away from the skin. CE EN1621-1:2012 Level 2. - High length compression design to prevent pad from slipping - Extra padding surrounding main knee cap for increased protection and support - Silicone printed gripper on inside of cuffs - Silicone printed logo on top and bottom outside cuffs to grip silicone on to shorts - Mesh back for increased airflow - Certified CE EN 1621-1:2012 Level 2 - Pre-curved fit for ultimate comfort - Weight 340g (size L)

Leatt's soft-shell 3DF impact foam elbow pads just keep getting better and better. Now with a refined sleeve construction with the latest material tech, these pads offer ventilation, great fit, and anti-slip features, while providing premium protection. It's CE tested and certified protection that scores a total of 11 points in the Leatt protection rating system. - 3DF AirFit ventilated soft impact foam - CE tested and certified as impact protection: Elbow EN1621-1 - New anti-slip forearm X-strap with silicone bicep lining - Abrasion-resistant Aramid outer layer for durability - Anti-odor MoistureCool and AirMesh wicking fabrics - Pre-curved design for better fit and function - Silicone printed elbow grip - Weight: from 350g (0.77lbs) pair

These great-value-for-the-money 3DF hip impact shorts offer the same comfort and features as Leatt's top models. Compression MoistureCool material with flatlock stitching and mesh ventilation ensure a comfortable fit and offer premium protection. They provide hip and thigh protection and score a total of 9 points in the Leatt protection rating system. Now you will return home with a smile on your face after every ride—even after a crash! - 3DF padding is CE tested and certified as impact protection: Hip EN1621-1 Level 1 - Extra-wide with comfortable waist stretch - Anti-odor MoistureCool and AirMesh wicking fabrics - Silicone-printed elastic leg cuffs - Pre-shaped 3D design for better fit and function

Ultra-slim Soft-impact Gel Protector with Sliding Plate This is the ultimate slim-design knee guard with CE certification. Featuring the latest Airflex impact gel technology, the knee guard is soft and flexible but extremely tough and capable of taking hard impacts. The additional sliding plate helps deflect energy, letting you get back up and keep on riding. The premium comfort comes from the soft-touch fabric of the sock. The tailored design of the sock and stretch material will adapt to any leg shape and provide great stability. This is next-level comfort and protection. - Super-slim, AirFlex gel impact protection - Sliding hardshell knee cup for added protection - Knitted base layer for superior comfort all day long - Pre-curved 3D design for optimal fit and function - Premium comfort using MoistureCool and AirMesh wicking fabrics - Silicone-printed, cupped knee grip - All protection materials perforated for ventilation - Silicone printed, non-slip cuffs - Total Leatt protection score of 12 points - CE-tested and certified as impact protection: Knee EN1621-1 - Weight: from 300g (0.66lbs) pair

Our only non-slip on design, the FORTIS features a protective shell for abrasion resistance and Level 1 impact protection to stand up to all your particularly downhill riding needs. - Perforated neoprene chassis for breathability - Strategically placed perimeter embossed foam padding with ventilation - Dense forward-facing chassis for shield protection - Internal elastic flex joint maintains chassis compression during pedaling - Tacky silicone elastic webbing to prevent slippage - Hook-and-loop thigh and calf closures with security cinch - Pre-curved chassis for attack position - Fortified injection molded plastic shields - Impacted Tested with Level 1 Protection - CE EN 1621-1:2012 Level 1

With the Flow Evo+ elbow guard, iXS provides super thin, light and comfortable elbow protectors. Developed with mountain bike legend Hans Rey, the pads are super compact to fit any backpack. The integrated Xmatter padding concept provides high impact absorption and protection. With the Flow Evo+ iXS introduce product properties like exchangeable padding and structurally improved AeroMesh of the newest generation, offering a higher level of comfort and structural strength. - Xmatter Protection Foam (exchangeable) - Aeromesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort - Looplock Closings - Silicon Stopper - En1621-1:2012 Certified

Flex Knee pads are for riders looking for soft pad comfort with the protection of a hard shell. Abrasion-resistant material covers the front and sides to give a full-on protection package. - Double layer custom foam for increased airflow and reduced weight - Upper calf muscle support to prevent pad from slipping - Center adjustment strap provides even tension above calf muscle and around top of pad - Custom idp polygon neoprene for superior protection and ventilation - Designed beyond CE EN 1621/1 Standards

The Flex Shorts offer protection on the hips, coccyx and thighs. Areas prone to injury or re-injury can now be protected with a compression fit short that flexes to the body's shape in all types of riding. - Flexible curve 1mm flexible side panels for a contoured fit and polygon perforated foam pads on the hips and legs - Rear yolk designed to protect the coccyx - All pads are removable for washing - Double layer polygon foam for increased ventilation and airflow - Jaquard knit elastic waistband and compression fit - Designed beyond CE EN 1621/1 Standards

Our Enduro Knee Sleeves are trail tuned and offer pedal-friendly protection on the trail. Made from a moisture-wicking micro-lycra material and featuring a nylon mess rear panel, they keep the air flowing as you pedal up and earn the down. They allow full range of motion, thanks again to that high-stretch rear panel, and keep your knees safe from hard trail knocks with the removable D3O elbow inserts that deliver both protection and comfort as you ride. - Moisture wicking micro-lycra sleeve with nylon mesh rear panel for increased airflow - Removable D3O knee inserts for the perfect balance of comfort and protection - Silicone grip top and bottom to hold the guard in place - Nylon, spandex micro lycra

Features D3O high performance shock absorbing foam and a terry lining for wicking and comfort. - D3O high performance shock absorbing foam is flexible in it's natural state but will protect upon impact - Integrated stabilization pad centers the elbow and ensures a secure fit - Perforated Neoprene enhances venting and moisture control; terry lined for wicking and comfort - Soft mesh panel at inner elbow for venting - Woven upper elastic strap and lower Neoprene comfort strap - Branded rubber grab tab and RF moniker logo

Lightweight and flexible padding that is barely noticeable — ideal for riders who want complete freedom of movement and reliable protection. The VPD Air padding is both highly flexible and highly ventilated for optimal freedom of movement, comfort and temperature control. The pad is housed in reinforced stretch fabric that stays securely in place thanks to an inner lining of anti-slip neoprene and an elastic strap with Velcro fastening. A low-profile design further supports practicality and comfort, enhancing the barely-there feel of the pads. - Lightweight and impact absorbing VPD compound. - Reinforced stretch fabric. - Elastic strap for a comfortable fit. - Neoprene anti-slip on the inside. - Designed with a low profile.

Designed with valuable feedback from the legend himself, the new Sam Hill Lite signature knee pad is designed to be the ultimate ultra-lightweight knee pad for trail riding and the racer seeking super light protection. The Sam Hill Lite knee pads mould with body heat to provide maximum comfort with a breathable sleeve to wick moisture away from the skin. Unlike many minimalist pads, the Sam Hill Lites pass CE EN1621-1:2012. - Rollable and stash-able using the elastic loop - Durable knee cap fabric for increased durability and protection - Compression square line Ripstop spandex allows for a durable lightweight feel - Long thigh-length fit for no slippage and all-day comfort - Silicone top and bottom cuff elastic gripper - Silicone logo print to assist in gripping short liner cuff - Certified CE en1621-1:2012 level 1 - Weight 205G pair (size XL)

More durability. More comfort. More customized fit. Pro-Rugged Knee Guards deliver more, because you demand it. So bring on more trails with sharp branches and rocks. Pro-Rugged Knee Guards are made with the same legendary, soft, ultra-conforming G-Form technology that hardens on impact. But now with much, much more. Featuring SmartFlex: Flexible As You Ride. Hardens on Impact. - Body-mapped impact-absorbing SmartFlex pads - Armortex technology adds durability to your pads and resists tearing or catching - Adjustable fit-strap for customized comfort and security - Ultra-comfortable double-knit compression fabric for extra protection - Extra-wide top gripper distributes pressure and keeps pads in place - Ventilated mesh back keeps you cool and dry - Low-profile bottom gripper keeps pads in place - Soft inner foam keeps pads secure and comfortable on your knees - Machine washable

Three protective layers: - Layer 1: DuraTx adds durability to pads and resists tearing or catching. - Layer 2: Body-mapped, impact-absorbing SmartFlex pads. - Layer 3: Soft inner foam keeps pads secure and comfortable - Knee sleeve has been extended with the additional protection on lower-shin - Adjustable fit-strap on knee guard for the perfect fit - Strap across forearm on elbow guard keeps pads in place - New high performance, extra-wide top gripper offers optimum level of pad security and a splash of color - Ventilated mesh back keeps the wearer cool and dry - Ultra-comfortable double-knit compression fabric for extra protection - Seam-reinforced binding to improve durability - CE-1621-1 certification - Machine washable

Leatt's soft-shell 3DF impact foam elbow pads just keep getting better and better. Leatt designed the 3DF 5.0 with a refined sleeve construction with the latest material tech to ensure that ventilation, fit, and anti-slip exceed your expectations and that great protection is a given. Additional features include an Aramid outer layer for durability and a pre-curved design for better fit and function. CE tested and certified protection that scores a total of 11 points in the Leatt protection rating system. - 3DF AirFit ventilated soft impact foam - CE tested and certified as impact protection: Elbow EN1621-1 - New 25% slimmer CE impact certified profile - New, wider, silicone printed, and elastic non-slip cuffs - Anti-odor MoistureCool and AirMesh wicking fabrics - All protection materials perforated for ventilation - Weight: 350g (pair)

Leatt's soft-shell 3DF impact foam elbow pads just keep getting better and better. Leatt designed the 3DF 5.0 with a refined sleeve construction with the latest material tech to ensure that ventilation, fit, and anti-slip exceed your expectations and that great protection is a given. Additional features include an Aramid outer layer for durability and a pre-curved design for better fit and function. It's CE tested and certified protection that scores a total of 11 points in the Leatt protection rating system. - 3DF AirFit ventilated soft impact foam - CE tested and certified as impact protection: Elbow EN1621-1 - New 25% slimmer CE impact-certified profile - New wider silicone printed and elastic non-slip cuffs - Anti-odor MoistureCool and AirMesh wicking fabrics - All protection materials are perforated for ventilation - Weight: 350g (pair)

The 3.0 EXT are extended hard-shell guards with 3DF impact foam that offers premium protection. The hard-shell design means there's no sock/sleeve; instead, a strap system allows for easy on/off and possible over-the-pant fit. It features a slimmer knee pad profile and an improved sliding surface, and offers a very nice fit with ergonomic left/right shapes. CE tested and certified protection that scores a total of 20 points in the Leatt protection rating system. - Hard-shell and 3DF AirFit ventilated soft impact foam - CE tested and certified as impact protection: Knee and shin EN1621-1 - Full shin extended length – EXT - New improved hard-shell sliding surface - 3D design for optimal fit with specific left and right sides - Slim shin plate that also fits inside boots - Weight: from 600g (1.32lbs) pair

Leatt's soft-shell 3DF impact foam knee pads just keep getting better and better. The Knee Guard 3DF 5.0 Junior has a totally new and refined sleeve construction with the latest material tech for riders who know that ventilation, fit and anti-slip are key and that great protection is a given. It features 3DF AirFit ventilated soft-impact foam, an abrasion-resistant Aramid outer layer for durability, and perforated materials for ventilation. CE tested and certified protection, it scores a total of 13 points in the Leatt protection rating system. - CE tested and certified as impact protection: Knee EN1621-1 - New 25% slimmer CE impact certified profile - New increased side protection - New wider, silicone-printed elastic cuffs - New 30mm low-profile elastic Velcro strap with easy-pull suede finger tabs - Anti-odor MoistureCool and AirMesh wicking fabrics - Pre-curved 3D design for better fit and function - Weight: 450g (pair)

The Knee Guard 3DF 5.0 Mini is now better than ever, designed for riders who know that ventilation, fit, and anti-slip are key and that, with Leatt, great protection is a given. It features 3DF AirFit ventilated soft-impact foam, an abrasion-resistant Aramid outer layer for durability, and perforated materials for ventilation. CE tested for certified protection, it scores a total of 13 points in the Leatt protection rating system. - CE tested and certified as impact protection: Knee EN1621-1 - New 25% slimmer CE impact certified profile - New increased side protection - New wider, silicone-printed elastic cuffs - New 30mm low-profile elastic Velcro strap with easy-pull suede finger tabs - Anti-odor MoistureCool and AirMesh wicking fabrics - Pre-curved 3D design for better fit and function - Weight: 450g (pair)

Ultralight, Movement-Friendly MTB Elbow Guards The Enduro D3O Elbow Guard offers our highest level of protection in an ultra-light, pedal-friendly design. The slip-on design with CE-certified D3O impact-absorbing inserts provides you with minimal restrictions and maximum benefits. Features - EN1621-1 Level 1 Elbow including high and low-temperature conditions - CE certified D3O insert for world-leading impact protection - Moisture-wicking, open stretch mesh at back of knee for breathability - Cordura fabric offers higher abrasion resistance in key impact areas - Reinforced skid plate reduces friction with the ground in a sliding fall - Removable D3O Insert for easy washing Construction - 70% PU / 20% polyester / 10% nylon

Designed to be our most pedal-friendly protection, the Youth Enduro Knee Sleeve has you covered wherever the trail takes you. These sleeve-style guards are designed using a moisture-wicking micro-lycra material with a nylon mesh rear panel for increased airflow. The D3O knee inserts provide the perfect balance of comfort and protection as you get rowdy on the trail, and are removable so you can wash the sleeve itself. With silicon grip to hold the guards in place, these are great, minimal-feel knee guards for young rippers.

Slip-On Knee Guards Designed with D3O The Youth Launch D3O Knee Guard offers an excellent combination of impact-absorbing protection with a value-focused build for smaller riders. The CE-certified D3O insert works seamlessly with the slip-on design of the guard to provide all-day comfort and the confidence to try new trails. Features - D3O inserts - EN1621-1 Level 1 CE certification - Anatomically-shaped and asymmetrical shin guards provide pedal-friendly comfort - Slip-on fit with hook-and-loop adjuster - Perforated neoprene offers comfort & breathability

Our only non-slip on design, the FORTIS features a protective shell for abrasion resistance and Level 1 impact protection to stand up to all your downhill riding needs. - Perforated neoprene chassis for breathability - Strategically placed perimeter embossed foam padding with ventilation - Tacky silicone elastic webbing to prevent slippage - Hook-and-loop closures with security cinch - Pre-curved chassis for attack position - Fortified injection-molded plastic shields - Spandex joint for ease of movement - Impacted Tested with Level 1 Protection - CE EN 1621-1:2012 Level 1

TERATEC Plus Knee Guards are designed with the principle of right materials, right places. Designed specifically to offer great impact protection in a slim, form fitting chassis. Upgraded with additional, dense, lateral protection padding, these guards offer excellent SmartShock CE Level 1 impact protection and abrasion resistance. All while still offering maximum breathability and flexibility. - Impact tested and certified to CE EN 1621-1:2012 Level 1 - Sleek, comfortable slip-on sleeves - Lateral protection upgrades over the Teratec - Completely pre-curved chassis for attack position - Fully vented Nylon, anti-abrasion, outer skin - Mobility flex joint for smooth articulation - Tacky silicone elastic webbing helps prevent slippage - Fully ventilated rear mesh for maximum cooling

The Slayer Elbow Pads set the standard for lightweight, breathable and CE-certified elbow pad design. Featuring dual-density DK Impact foam and a durable Cordura outer, these pads maintain a breathable design that's light and comfortable enough for longer rides and hot weather. Their pre-curved shape and flexible foam padding design maintain a custom-fit feel, while silicone gripper cuffs ensure a slip-free fit. Integrated odor control helps fight the stink factor. - Shell: Cordura Polyester, 4-way stretch AriaprenePro, 4-way stretch mesh back: 80% Polyester, 20% Nylon - Insert: 100% DK Impact Polyurethane foam - Lightweight, low-profile CE-certified elbow protector (EN 1621-1 Level 1) - Dual-density DK Impact energy-absorbing foam technology - Cordura abrasion resistance - Polygiene Odor Control technology - Open-back design increases breathability - Pre-curved ergonomic patterning for enhanced fit

Easy to pull on. Easy to pedal in. Easy to forget you're wearing. The Slayer Bike Knee Sleeves offer low-profile padding for hot days and all-mountain riding. The form-fitting design uses energy-absorbing DK Impact foam for a flexible fit that conforms to match the shape of your leg. Snug-fitting, four-way stretch mesh with gripper strips keep them in place, and built-in odor control helps manage the stink. - 4-way stretch mesh back: 70% Polyester 30% Nylon - Insert: 100% DK Impact Polyurethane foam - Our lightest, lowest-profile, most-breathable knee pad - Perforated DK Impact energy absorbing foam technology - Aramid ripstop shell - Polygiene Odor Control technology - Seamless calf band and silicone gripper elastic keep pad in place - Pre-curved ergonomic patterning for enhanced fit

Without compromising on safety and surpassing the relevant CE test the Transition pads offer comfortable protection in a super-light package. At 262g per side in Medium they are a true fit-and-forget piece of kit. - Low profile, minimal protection at its best - Compression fit kneepad with high-strength, flexible 1mm cap for superior fit and movement - Poly/Spandex and 4 way stretch mesh that is rollable and stowable enough to fit in a jersey pocket - Designed beyond CE EN 1621/1 Standards

Our Pro-X3 line is designed for every rider in mind, from beginners to veterans and anyone in between. G-Form's industry leading SmartFlex protection is flexible as you ride, yet hardens on impact in the event of a crash. And SmartFlex pads are fully waterproof, so machine wash them as needed. - Body-mapped, impact-absorbing SmartFlex pads layered on top of a ventilated, soft inner foam layer allowing for maximum protection, comfort, and breathability - SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Moisture-wicking, UPF 50+ fabric - Machine washable - Compression sleeves with grippers at the top and bottom to keep guards in place - CE 15613 impact with 1621 coverage

- Body-mapped, impact-absorbing SmartFlex pads layered on top of a ventilated, soft inner foam layer allowing for maximum protection, comfort, and breathability - SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Moisture-wicking, UPF 50+ fabric - Machine washable - Compression sleeves with grippers at the top and bottom to keep guards in place - CE 15613 impact with 1621 coverage

Ultra Slim and Soft Impact Gel Protector Minimalistic, comfortable, ergonomic fit, and uncompromised CE-certified impact protection. The Airflex Knee Guard Pro is an engineering masterpiece! The lightweight construction and silicone grip panels made it possible to delete the thigh strap and still keep that famous Leatt non-slip fit. This knee guard meets all of our design criteria. By changing over to 3D-shaped impact gel, we achieved the minimalistic slim shape while still keeping the CE Impact protection. - Super slim and lightweight AirFlex impact gel protection - Side and upper knee impact protection - Pre-curved design for optimal fit and function - Silicone-printed, cupped knee grip - Premium comfort using MoistureCool and AirMesh wicking fabrics - All protection materials perforated for ventilation - Silicone-printed, non-slip cuffs - Total Leatt protection score of 15 points - CE tested and certified as impact protection: Knee EN1621-1 - Weight: from 300g (0.66lbs) pair

Our Enduro Elbow Sleeves are trail tuned and offer pedal-friendly protection on the trail. Made from a moisture-wicking micro-lycra material and featuring a nylon mess rear panel, they keep the air flowing as you pedal up and earn the down. They allow full range of motion, thanks again to that high-stretch rear panel, and keep your elbows safe from hard trail knocks with the removable D3O elbow inserts that deliver both protection and comfort as you ride. - Moisture wicking micro-lycra sleeve with nylon mesh rear panel for increased airflow - Removable D3O elbow inserts for the perfect balance of comfort and protection - Silicone grip top and bottom to hold the guard in place - Nylon, spandex micro lycra

Developed for cyclists who want enhanced flexibility, ventilation and freedom of movement, Joint VPD Air Elbow is a light-duty elbow pad. Featuring a Crash Retention Strap (CRS) and neoprene anti-slip to ensure a comfortable fit, even in rough riding conditions. - Lightweight and impact absorbing VPD compound. - Reinforced stretch fabric. - Crash retention strap (CRS) for a comfortable fit. - Neoprene anti-slip on the inside. - Designed with a low profile.

The Flex elbow/youth knee pads are for any rider needing complete coverage with confidence-inspiring protection. Constructed in the same way our adult Flex Knee pads with an open back and dual-layer protection the Flex has you covered.

Designed with valuable feedback from the legend himself, the Sam Hill Lite signature elbow pad builds off of our popular Transition elbow pad to be the ultimate ultra-lightweight elbow pad for all types of riding or racing. Light enough to be worn all day long. The Sam Hill Lite elbow pads mold with body heat to provide maximum comfort with a breathable sleeve to wick moisture away from the skin. CE Certified Level 1. Compression square line Ripstop Spandex fabric allows for a durable lightweight feel along with great airflow. - Rollable and stash-able using the elastic loop - Durable elbow cap fabric for increased durability and protection - Compression square line Ripstop spandex allows for a durable lightweight feel - Long bicep length fit for no slippage and all-day comfort - Articulated cut for the perfect fit - Silicone top and bottom elastic gripper - Certified CE/ EN 1621/1 Level 1 - Weight 105G pair (size XL)

More durability. More comfort. More customized fit. Pro-Rugged Elbow Guards deliver more because you demand it. So bring on more trails with sharp branches and rocks. Pro-Rugged Elbow Guards are made with the same legendary, soft, ultra-conforming G-Form technology that hardens on impact. But now with much, much more. Featuring SmartFlex: Flexible As You Ride. Hardens on Impact. - Body-mapped impact-absorbing SmartFlex pads - Armortex technology adds durability to your pads and resists tearing or catching - Ultra-comfortable double-knit compression fabric for extra protection - Extra-wide top gripper distributes pressure and keeps pads in place - Ventilated mesh back keeps you cool and dry - Low-profile bottom gripper keeps pads in place - Soft inner foam keeps guards secure and comfortable on your elbows - Machine washable

Designed to be our most pedal-friendly protection, the Youth Enduro Elbow Sleeve has you covered wherever the trail takes you. These sleeve-style guards are designed using a moisture-wicking micro-lycra material with a nylon mesh rear panel for increased airflow. The D3O elbow inserts provide the perfect balance of comfort and protection as you get rowdy on the trail, and are removable so you can wash the sleeve itself. With silicon grip to hold the guards in place, these are great, minimal-feel elbow guards for young rippers.

Slip-On Elbow Guards Designed with D3O The Youth Launch D3O Elbow Guard offers an excellent combination of impact-absorbing protection with a value-focused build for smaller riders. The CE certified D3O insert works seamlessly with the slip-on design of the guard to provide all-day comfort and the confidence to try new trails. Features - D3O inserts - EN1621-1 Level 1 CE certification - Pre-curved ergonomic fit - Slip-on fit with hook-and-loop adjuster - Perforated neoprene offers comfort & breathability

TERATEC Protection is designed with the principle of right materials, in all the right places. Primarily designed for enduro/all mountain, these guards offer Level 1 impact protection while still offering maximum breathability and flexibility for everyday use. - Sleek slip-on sleeves - Pre-curved chassis for attack position - Moderately padded with nylon anti-abrasion outer skin - Tacky silicone elastic webbing to prevent slippage - Fully ventilated rear mesh for maximum cooling - Impacted Tested with Level 1 Protection

TERATEC Plus Protection is designed with the principle of right materials, right places. Designed specifically to offer great impact protection in a slim, form fitting chassis. Upgraded with additional, dense, lateral protection padding, these guards offer excellent SmartShock CE Level 1 impact protection and abrasion resistance. All while still offering maximum breathability and flexibility. - Impact tested and certified to CE EN 1621-1:2012 Level 1 - Sleek, comfortable slip-on sleeves - Lateral protection upgrades over the Teratec - Completely pre-curved chassis for attack position - Nylon, anti-abrasion, outer skin - Mobility flex joint for smooth articulation - Tacky silicone elastic webbing helps prevent slippage - Fully ventilated rear mesh for maximum cooling

Ultra-slim and soft-impact gel protector. A high-tech elbow protection in a minimalistic, comfortable fit with CE certification, this elbow guard has a lightweight construction which can flex and fit for premium comfort. The AirFlex impact gel is the latest technology in protection. Single sizing and silicone grip panels give you the famous Leatt non-slip fit. - New super-slim and lightweight AirFlex gel impact protection - Our 3D design ensures a great fit that is very comfortable - Premium comfort using MoistureCool and AirMesh wicking fabrics - Silicone lamination, non-slip cuffs to keep protector in place - Silicone printed, cupped elbow grip - Total Leatt protection score of 11 points - CE tested and certified as impact protection: Elbow EN1621-1 - Weight: from 240g (0.53lbs) pair

Lightweight and breathable enough to forget you're wearing them, the Slayer Bike Elbow Sleeves offer low-profile padding for hot days and all-mountain rides. The form-fitting design uses energy-absorbing DK Impact foam for a flexible fit that conforms to match your arm. Snug-fitting four-way stretch mesh with gripper strips keep them in place, and built-in odor control helps manage the stink. - 4-way stretch mesh back: 70% Polyester 30% Nylon - Insert: 100% DK Impact Polyurethane foam - Our lightest, lowest-profile, most-breathable elbow pad - Perforated DK Impact energy-absorbing foam technology - Aramid ripstop shell - Polygiene Odor Control technology - Seamless calf band and silicone gripper elastic keep pad in place - Pre-curved ergonomic patterning for enhanced fit

- Removable D3O T4 Trio foam pad provides impact protection. - Mesh sleeve fabric for breathability and comfort. - Silicone gripper plus hook and loop strap closure for a secure fit. - Abrasion-resistant elbow cover for durability. - Unisex size range

- Adjustable hook and loop strap closure around the calf and silicone gripper on the upper thigh provide a secure fit. - Removable D3O LP1 Compact certified impact absorbing foam. - Lycra front panel and mesh rear panel for comfort and breathability. - Abrasion-resistant knee cover for durability.

Super Light Minimalist design keeps weight low and a slim profile means the Transition elbow pads can easily go unnoticed under a jersey. Internal silicone strips combined with a compression fit mean the pads form closely around the upper and forearm giving a consistent non-slip fit. Breathable The breathable 4-way stretch mesh runs the full length on the inside of the pads keeping free from moisture build-up. - High length compression design to prevent pad from slipping - Silicone printed gripper on inside of cuffs - Mesh back for increased airflow - Tested beyond CE EN 1621-1:2012 Level 2 - Pre-curved fit for ultimate comfort - S: S: 8''-10'' (20-25cm), M: 10''-12'' (25-30cm), L: 12''-14'' (30-35cm), XL: 14''-16'' (35-40cm) - Take measurement from the widest part of the bicep - Weight 245g (size L)

Our super-light Youth Transition pads are designed for younger riders looking for lightweight protection that can be worn all day long. The Transition pads mould with body heat to provide maximum comfort with a breathable mesh back panel to wick moisture away from the skin.

- Body-mapped, impact-absorbing SmartFlex pads layered on top of a ventilated, soft inner foam layer allowing for maximum protection, comfort, and breathability - SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Moisture-wicking, UPF 50+ fabric - Machine washable - Compression sleeves with grippers at the top and bottom to keep guards in place - CE 15613 impact with 1621 coverage

- Custom diecut removable D3O XTI Mesh foam pad provides impact protection. - Mesh sleeve fabric for breathability and comfort. - Silicone gripper plus hook and loop strap closure for a secure fit. - Abrasion-resistant elbow cover for durability.

Our super-light Youth Transition pads are designed for younger riders looking for lightweight protection that can be worn all day long. The Transition pads mold with body heat to provide maximum comfort with a breathable mesh back panel to wick moisture away from the skin. - High length compression design to prevent the pad from slipping - Silicone printed gripper on inside of cuffs - Mesh back for increased airflow - Certified CE EN 1621-1:2012 Level 2