Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Protective/Armor

$54.99
When you need some peace of mind on your XC/Trail ride then look at the Charge knee pad for abrasion protection without sacrificing any pedaling comfort. - Butterfly mesh sleeve provides a secure yet breathable fit - Foam panel with stretch cover for abrasion protection - Strategic seam construction for added overall comfort - Silicone gripper along inner top opening plus silicone patch at shin ensures a secure fit - This pad is NOT rated for impact; It is recommended for abrasion-resistance protection only
$139.99
- Made for the e-xtreme - Hard shell gives protection and ability to slide on hard surfaces - Top and bottom adjustable hook and look fit-strap for customized comfort and security - Rugged Armortex (kevlar blend material) pads covering flights abrasion - Zipper for easy on and off - Active Airflow: 4 layer ventilation system - Technial back mesh for breathability - CE 1621-1 certified to ensure outstanding protection
$49.99 - $59.99
- Body-mapped, impact-absorbing SmartFlex pads layered on top of a ventilated, soft inner foam layer allowing for maximum protection, comfort, and breathability - SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Moisture-wicking, UPF 50+ fabric - Machine washable - Compression sleeves with grippers at the top and bottom to keep guards in place - CE 15613 impact with 1621 coverage
$90.00
- Adjustable hook and loop strap closure around the calf and silicone gripper on the upper thigh provide a secure fit. - Removable D3O LP1 foam pad provides certified impact protection. - Lycra front panel and mesh rear panel for comfort and breathability. - Abrasion-resistant knee cover for durability. - Silicone patch at shin combats slippage. - Unisex size range.
$79.99
Three protective layers: - Layer 1: DuraTx adds durability to pads and resists tearing or catching. - Layer 2: Body-mapped, impact-absorbing SmartFlex pads. - Layer 3: Soft inner foam keeps pads secure and comfortable - Knee sleeve has been extended with the additional protection on lower-shin - Adjustable fit-strap on knee guard for the perfect fit - Strap across forearm on elbow guard keeps pads in place - New high performance, extra-wide top gripper offers optimum level of pad security and a splash of color - Ventilated mesh back keeps the wearer cool and dry - Ultra-comfortable double-knit compression fabric for extra protection - Seam-reinforced binding to improve durability - CE-1621-1 certification - Machine washable
$94.99
Three protective layers: - Layer 1: DuraTx adds durability to pads and resists tearing or catching. - Layer 2: Body-mapped, impact-absorbing SmartFlex pads. - Layer 3: Soft inner foam keeps pads secure and comfortable - Knee sleeve has been extended with the additional protection on lower-shin - Adjustable fit-strap on knee guard for the perfect fit - New high performance, extra-wide top gripper offers optimum level of pad security and a splash of color - Ventilated mesh back keeps the wearer cool and dry - Ultra-comfortable double-knit compression fabric for extra protection - Seam-reinforced binding to improve durability - CE-1621-1 certification - Machine washable
$180.00
- Removable LITESHIELD PLUS back protector (EN 1621-2, level 2) - Protective EVA padding on the upper back and coccyx - Height-adjustable AIROFLEX hip belt with anti-stick Velcro - Odour prevention: treated with Polygiene Odor Crunch - Machine washable
$200.00
- Removable LITESHIELD PLUS back protector (EN 1621-2, level 2) - Protective EVA padding on the upper back and coccyx - Height-adjustable AIROFLEX hip belt with anti-stick Velcro - Odour prevention: treated with Polygiene Odor Crunch - Structured silicone coating on inner seams prevents slippage - Machine washable
$19.99
The Revive wrist support features a 4-way stretch elastic with a Stabalite buttress support to aid in preventing hyperextension. - One size fits most - Left-hand specific - Protection Area: Wrist - Pad Type: Foam
$129.00
The SURPASS from 100% is your ultimate choice for no compromise, all-in-one coverage. Featuring a Level 2 impact rating, this gear really does everything well—light enough for cross country, protective enough for downhill, and breathable enough for all your pedaling needs. - Rubberized ventilated outer skin - Strategically placed perimeter embossed foam padding with ventilation - Fully ventilated plastic protective cup with high impact absorption - Pre-curved chassis for attack position - Internal elastic flex joint maintains chassis compression during pedaling - Tacky silicone elastic webbing to prevent slippage - Thigh cinch for customizable fit and security - Forearm cinch for added security - Impacted Tested with Maximum Level 2 Protection
$130.00
- Integrated lateral hip protectors (EN 1621-1, level 1) - Protective padding on the outer thighs and on the coccyx - Comfortable waistband - Flat seams prevent chafing - Odour prevention: treated with Polygiene Odor Crunch - Machine washable - Integrated CHAMOIS PAD
$70.00
Developed for cyclists who want enhanced flexibility, ventilation and freedom of movement, Joint VPD Air Elbow is a light-duty elbow pad. Featuring a Crash Retention Strap (CRS) and neoprene anti-slip to ensure a comfortable fit, even in rough riding conditions. - Lightweight and impact absorbing VPD compound. - Reinforced stretch fabric. - Crash retention strap (CRS) for a comfortable fit. - Neoprene anti-slip on the inside. - Designed with a low profile.
$94.99
- Body-mapped, impact-absorbing SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Ventilated SmartFlex hip pads allow airflow to keep wearer dry and comfortable - Moisture-wicking, UPF 50+ compression fabric - Side leg pocket - Machine washable - CE PPE II—15613 Impact Attenuation / 1621-1 coverage
$54.99
- Body-mapped, impact-absorbing SmartFlex pads layered on top of a ventilated, soft inner foam layer allowing for maximum protection, comfort and breathability - SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Moisture-wicking, UPF 50+ fabric - Machine washable - Compression sleeves with grippers at the top and bottom to keep guards in place - CE 15613 impact with 1621 coverage
$119.90
The Carve models manage without hard shells and are, therefore, light and extremely comfortable to wear. They are ideal for somewhat harder use and, with the integrated Xmatter padding concept, provide high impact absorption and protection. With the Carve Evo+, we introduce product properties like exchangeable padding and the newest generation of structurally improved AeroMesh, offering a higher level of comfort and structural strength. - Xmatter protection foam (exchangeable) - AeroMesh, light, moisture wicking, breathable, anti-bacterial, added structural strength, high level of comfort - LoopLock closings - Silicone gripper - Certifications: EN1621-1:2012, EN14362-1:2012, EN14362-3:2012, PFOS/PFOA (SGS Taiwan Ltd.) - Material composition: 40% Polyester, 25% PU, 15% Nylon, 15% Kevlar, 5% EVA
$34.99
The Invisa-Lite knee pads feature 3D foam, Lycra compression fit and anti-slip silicone. - Breathable, lightweight Lycra body - Double and single needle heavy-duty stitching - Protection Area: Knee - Pad Type: Foam
$110.00
- Integrated lateral hip protectors (EN 1621-1, level 1) - Protective padding on the outer thighs and on the coccyx - Comfortable waistband - Flat seams prevent chafing - Odour prevention: treated with Polygiene Odor Crunch - Machine washable
$210.00
- LITESHIELD PLUS back protector (EN 1621-2, level 2) - Shoulder protectors (EN 1621-1, level 2) and chest pad for increased protection - Mesh inserts for improved ventilation - Special hydration bladder pocket with interior hose routing and tool pocket - Odour prevention: treated with Polygiene Odor Crunch - Structured silicone coating on inner seams prevents slippage - Machine washable
$60.00
- Custom diecut removable D3O XTI Mesh foam pad provides impact protection. - Mesh sleeve fabric for breathability and comfort. - Silicone gripper plus hook and loop strap closure for a secure fit. - Abrasion-resistant elbow cover for durability.
$39.99
- Impact-absorbing SmartFlex pads shield your hips from unexpected impacts - Silicone grippers on the back of each pad assure they stay in place - Ventilated pads - Pads are waterproof and will not absorb water or sweat
$99.99
More durability. More comfort. More customized fit. Pro-Rugged Knee-Shin Guards are made with SmartFlex—body-mapped, impact-absorbing pads that offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact. So bring on more trails with sharp branches and rocks. - Extra-wide top gripper distributes pressure and keeps pads in place - Armortex technology adds durability to pads and resists tearing or catching - Soft inner foam keeps pads secure and comfortable on knees - Body-mapped, impact-absorbing SmartFlex pads - Extended coverage for shins - Adjustable fit-strap for customized comfort - Ultra-comfortable double-knit compression fabric for extra protection - CE 1621-1 certified to ensure outstanding protection - Ventilated mesh back keeps the wearer cool and dry - Machine washable - Low-profile bottom gripper keeps pads in place
$65.00
Lightweight and breathable enough to forget you're wearing them, the Slayer Bike Elbow Sleeves offer low-profile padding for hot days and all-mountain rides. The form-fitting design uses energy-absorbing DK Impact foam for a flexible fit that conforms to match your arm. Snug-fitting four-way stretch mesh with gripper strips keep them in place, and built-in odor control helps manage the stink. - 4-way stretch mesh back: 70% Polyester 30% Nylon - Insert: 100% DK Impact Polyurethane foam - Our lightest, lowest-profile, most-breathable elbow pad - Perforated DK Impact energy-absorbing foam technology - Aramid ripstop shell - Polygiene Odor Control technology - Seamless calf band and silicone gripper elastic keep pad in place - Pre-curved ergonomic patterning for enhanced fit
$49.00
RIDECAMP is your simple, sleek and effective choice for cross-country and light-duty ride needs. - Lightweight slip-on sleeves - Pre-curved chassis for attack position - Lightly padded nylon anti-abrasion outer skin - Fully perforated neoprene chassis for breathability - Tacky silicone elastic webbing to prevent slippage - Fully ventilated rear mesh for maximum cooling
$59.00
TERATEC Protection is designed with the principle of right materials, in all the right places. Primarily designed for enduro/all mountain, these guards offer Level 1 impact protection while still offering maximum breathability and flexibility for everyday use. - Sleek slip-on sleeves - Pre-curved chassis for attack position - Moderately padded with nylon anti-abrasion outer skin - Tacky silicone elastic webbing to prevent slippage - Fully ventilated rear mesh for maximum cooling - Impacted Tested with Level 1 Protection
$69.00
TERATEC Protection is designed with the principle of right materials, in all the right places. Primarily designed for enduro/all mountain, these guards offer Level 1 impact protection while still offering maximum breathability and flexibility for everyday use. - Sleek slip-on sleeves - Pre-curved chassis for attack position - Moderately padded with nylon anti-abrasion outer skin - Tacky silicone elastic webbing to prevent slippage - Fully ventilated rear mesh for maximum cooling - Impacted Tested with Level 1 Protection
$124.00
- Partnering with engineers at Rheon Labs Chromag has created a unique pedal friendly knee pad that does not skimp on protection
$120.00
The Bluegrass Skinny D3O® pads are the go-to choice for our rider's shredding stages of the Enduro World Series. Breathable fabric and light overall weight ensure they can keep pedaling hard to the end of the ride. - D3O® Technology - Protectors compliant with EN 1621-1, Level 1 - Extended sleeve - Silicone grippers - Strong, durable Kevlar fabric - Breathable Air mesh fabric
$170.00
The Bluegrass Armor Lite is the perfect choice for riders who prefer lighter gear under their jersey. During long pedaling sections, you’ll feel as if it’s not even there. Armor Lite offers the right balance between flexibility and freedom of movement. - 3-Layers EVA full back protector - Stretch Mesh ergonomic fabric - Open mesh breathable and ventilated fabric - Slim-fit construction - Hydro pack compatible (1L capacity) - Three rear pockets - Neck brace compatible - EN 1621-2 Level 1 certified
$100.00
Our Bluegrass Solid knee pads are designed for full protection against the most common impacts. We added larger side pads to provide a greater range of coverage and a safer ride. - Two-layer protection - Certification CE 1621-1:2012 Level 1 - Extended sleeve - Silicon grippers - Top and bottom straps - Breathable Air Mesh fabric - Side soft pads
$230.00
The Bluegrass Protectives Seamless Lite D3O® is the most breathable and comfortable armor for mountain biking. A unique product that’s made for long rides, keeping your back protected downhill, whilst remaining exceptionally comfortable when pedaling. A back protector you can wear for everyday rides. - 80% Polypropylene, 10% Polyamide, 10% Elastan - Seamless construction ensures adherent and ergonomic fit - Unisex fit to accommodate all body shapes - Dryarn® microfiber guarantees the highest level of performance for next-to-skin fabrics - Open mesh enhances ventilation and sweat evaporation - Quick-drying microfiber works to regulate body temperature - Dermatologically tested microfiber to eliminate bacteria and odor - Back protector D3O® BP4 L1 (removable) - D3O® insert compliant with EN 1621-2:2014 - Two rear pockets for snacks and soft items - Lightness and flexibility gives you freedom of movement - Long-length bottom to be dressed into the pants maximizing stability - Hand wash only. Use only mild soap and water to clean your protector.
$100.00
The Bluegrass Wolverine riding shorts are an incredibly tough and durable choice, either for downhill, all-mountain, or even BMX. Designed to give a superbly comfortable experience while in the saddle, the Bluegrass Wolverine shorts are made with stretchable mesh fabric for an excellent fit and breathability. Working in synergy with our Bluegrass armor, the Wolverine shorts can be attached with clip-hooks at the side of the vest, so pads won’t shift around while riding. - Dual-density seat pad - EVA foam inserts on thighs, hips and tailbone - Stretch mesh fabric - Elastic waistband - Silicone grippers and armor clips
$74.99
Our Pro-X3 line is designed for every rider in mind, from beginners to veterans and anyone in between. G-Form's industry leading SmartFlex protection is flexible as you ride, yet hardens on impact in the event of a crash. And SmartFlex pads are fully waterproof, so machine wash them as needed. - Body-mapped, impact-absorbing SmartFlex pads layered on top of a ventilated, soft inner foam layer allowing for maximum protection, comfort, and breathability - SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Moisture-wicking, UPF 50+ fabric - Machine washable - Compression sleeves with grippers at the top and bottom to keep guards in place - CE 15613 impact with 1621 coverage
$200.00
- Removable LITESHIELD PLUS back protector (EN 1621-2, level 2) - Protective EVA padding on the upper back and coccyx - Height-adjustable AIROFLEX hip belt with anti-stick Velcro - Odour prevention: treated with Polygiene Odor Crunch - Structured silicone coating on inner seams prevents slippage - Machine washable
$79.99
The Knee Guard 3DF 5.0 Mini is now better than ever, designed for riders who know that ventilation, fit, and anti-slip are key and that, with Leatt, great protection is a given. It features 3DF AirFit ventilated soft-impact foam, an abrasion-resistant Aramid outer layer for durability, and perforated materials for ventilation. CE tested for certified protection, it scores a total of 13 points in the Leatt protection rating system. - CE tested and certified as impact protection: Knee EN1621-1 - New 25% slimmer CE impact certified profile - New increased side protection - New wider, silicone-printed elastic cuffs - New 30mm low-profile elastic Velcro strap with easy-pull suede finger tabs - Anti-odor MoistureCool and AirMesh wicking fabrics - Pre-curved 3D design for better fit and function - Weight: 450g (pair)
$99.99
A lightweight chest protector with premium hard-shell roost protection. CE tested and certified, the 3D design and adjustable waist straps offer a close fit that is comfortable as well as ventilated and works with or without a Leatt Neck Brace. Next step up in protection level is the 4.5 Chest Protector Junior with impact foam. - Total Leatt protection score of 3 points - Hard shell protector - CE tested and certified as roost protection: Chest EN14021 - Our 3D design ensures a great fit that is very comfortable - Padded base layer to prevent hard shell rubbing on skin - Close fitting allows for over or under the jersey use - Liberal venting helps keep rider cool - Recessed front/rear areas and BraceOn neck brace fitting system allow over/ under the shirt Leatt neck brace fit - Adjustable waist straps for great fit - Weight: 550g Junior fits two sizes: - Small/Medium = 134 – 146cm, 4ft 5" – 4ft 9" - Large/XX-Large = 147 – 159cm, 4ft 9" – 5ft 3"
$109.99
7iDP Transition Knee Shin Pads EXTRA PROTECTION Without compromising mobility the Transition Knee Shin pads offer an extra 5 inches of shin protection in a super-light package. Along with the side knee protection you'll be ready for any trail. COMPRESSION FIT Designed to keep weight down the compression fit, the slip-on design fits higher on the thigh than most pads. An internal silicone strip keeps the pads from slipping down. BREATHABLE SOCK Running the length of the pad in the rear and extending across the lower front a breathable 4-way stretch mesh maintains airflow for all-day comfort. - High length compression design to prevent pad from slipping - Extra shin and side knee padding for increased protection - Silicone printed gripper on inside of cuffs - Silicone printed logo on top outside cuff to grip silicone on to shorts - Mesh back for increased airflow - Certified CE EN 1621-1:2012 Level 2 - Pre-curved fit for ultimate comfort - Weight 340 grams (Size L)
$79.99
Designed with valuable feedback from the legend himself, the new Sam Hill Lite signature knee pad is designed to be the ultimate ultra-lightweight knee pad for trail riding and the racer seeking super light protection. The Sam Hill Lite knee pads mould with body heat to provide maximum comfort with a breathable sleeve to wick moisture away from the skin. Unlike many minimalist pads, the Sam Hill Lites pass CE EN1621-1:2012. - Rollable and stash-able using the elastic loop - Durable knee cap fabric for increased durability and protection - Compression square line Ripstop spandex allows for a durable lightweight feel - Long thigh-length fit for no slippage and all-day comfort - Silicone top and bottom cuff elastic gripper - Silicone logo print to assist in gripping short liner cuff - Certified CE en1621-1:2012 level 1 - Weight 205G pair (size XL)
$84.99
Flex Knee pads are for riders looking for soft pad comfort with the protection of a hard shell. Abrasion-resistant material covers the front and sides to give a full-on protection package. - Double layer custom foam for increased airflow and reduced weight - Upper calf muscle support to prevent pad from slipping - Center adjustment strap provides even tension above calf muscle and around top of pad - Custom idp polygon neoprene for superior protection and ventilation - Designed beyond CE EN 1621/1 Standards
$74.99
Without compromising on safety and surpassing the relevant CE test the Transition pads offer comfortable protection in a super-light package. At 262g per side in Medium they are a true fit-and-forget piece of kit. - Low profile, minimal protection at its best - Compression fit kneepad with high-strength, flexible 1mm cap for superior fit and movement - Poly/Spandex and 4 way stretch mesh that is rollable and stowable enough to fit in a jersey pocket - Designed beyond CE EN 1621/1 Standards
$119.99
Ultra-slim Soft-impact Gel Protector with Sliding Plate This is the ultimate slim-design knee guard with CE certification. Featuring the latest Airflex impact gel technology, the knee guard is soft and flexible but extremely tough and capable of taking hard impacts. The additional sliding plate helps deflect energy, letting you get back up and keep on riding. The premium comfort comes from the soft-touch fabric of the sock. The tailored design of the sock and stretch material will adapt to any leg shape and provide great stability. This is next-level comfort and protection. - Super-slim, AirFlex gel impact protection - Sliding hardshell knee cup for added protection - Knitted base layer for superior comfort all day long - Pre-curved 3D design for optimal fit and function - Premium comfort using MoistureCool and AirMesh wicking fabrics - Silicone-printed, cupped knee grip - All protection materials perforated for ventilation - Silicone printed, non-slip cuffs - Total Leatt protection score of 12 points - CE-tested and certified as impact protection: Knee EN1621-1 - Weight: from 300g (0.66lbs) pair
$64.99
Super Light Minimalist design keeps weight low and a slim profile means the Transition elbow pads can easily go unnoticed under a jersey. Internal silicone strips combined with a compression fit mean the pads form closely around the upper and forearm giving a consistent non-slip fit. Breathable The breathable 4-way stretch mesh runs the full length on the inside of the pads keeping free from moisture build-up. - High length compression design to prevent pad from slipping - Silicone printed gripper on inside of cuffs - Mesh back for increased airflow - Tested beyond CE EN 1621-1:2012 Level 2 - Pre-curved fit for ultimate comfort - S: S: 8''-10'' (20-25cm), M: 10''-12'' (25-30cm), L: 12''-14'' (30-35cm), XL: 14''-16'' (35-40cm) - Take measurement from the widest part of the bicep - Weight 245g (size L)
$319.99
All new for 2023 is the Leatt 4.5 neck brace, with 2-way thoracic adjustability for great fit, it sits between the 3.5 and 5.5 in the way of adjustment and price. A composite matrix platform offers not only strength but also a very lightweight neck brace you won’t know your wearing. Our neck braces are designed to transfer potential injury producing forces away from the neck during an impact, to other body parts in a safe and efficient manner, thereby reducing your risk of a neck injury. Feel protected and ride with confidence. If you are looking for more adjustability, take a look at the 5.5 -Independently lab and rider tested, proven to reduce neck forces and neck injuries through transferring the load during an accident away from the fragile bones in the neck. -Up to 89% reduction in critical cervical spine injuries -Collarbone injuries up to 45% MORE likely WITHOUT a neck brace -Independent Moto motorcycle study by Action Sports EMS -Engineered collarbone cut-out to keep your helmet rim away from your most fragile bones -Optimal helmet rim striking platform is designed to redistribute neck forces and provides the helmet with freedom of movement -CoreFlex split rear folding thoracic strut is designed to work with the body’s natural movements for a more comfortable fit and break away before applying excessive pressure to the back -Two-way adjustability for the rear to ensure a great fit -Composite matrix platform allows for efficient reduction in neck forces -Sculptured, split front for improved comfort and fit -Injected, durable and easy-to-clean foam padding -CE tested and certified as Personal Protective Equipment 89/686/EEC
$79.00
Our only non-slip on design, the FORTIS features a protective shell for abrasion resistance and Level 1 impact protection to stand up to all your downhill riding needs. - Perforated neoprene chassis for breathability - Strategically placed perimeter embossed foam padding with ventilation - Tacky silicone elastic webbing to prevent slippage - Hook-and-loop closures with security cinch - Pre-curved chassis for attack position - Fortified injection-molded plastic shields - Spandex joint for ease of movement - Impacted Tested with Level 1 Protection - CE EN 1621-1:2012 Level 1
$180.00
- Removable LITESHIELD PLUS back protector (EN 1621-2, level 2) - Protective EVA padding on the upper back and coccyx - Height-adjustable AIROFLEX hip belt with anti-stick Velcro - Odour prevention: treated with Polygiene Odor Crunch - Machine washable
$119.99
You can't wear bulky, uncomfortable pads that hold you back. But when the elements turn against you, it could put you on the sideline, and you can't let that happen. With the Men's Elite Short Liner, you are protected with high-grade hip pads, certified to motorcycle-level impact. The best part is, you won't even know it's there unless you need it. Go ride! Featuring SmartFlex: Flexible as you Ride. Hardens on Impact. - Body-mapped impact-absorbing SmartFlex pads - CE certified for motorcyclists {CE EN 1621 - 1:2012} - Comfortable: Lightweight, flexible, body-mapped pads give you total comfort during any ride. - Chafe-Free: You will be chafe-free with a built in 4+ hour chamois - Ventilated: Stay cool with ventilation pads and moisture-wicking, UPF 50+ fabric - Secured: Your shorts won't ride up with low-profile, 2" elastic grippers - Equipped: Keep the things you need for your ride in the side leg pocket
$59.99
Old School Neoprene guards are the most comfortable protective gear you will ever wear. Designed by Lizard Skins and manufactured in our Utah Facility. Made of 5 mm perforated Airprene, ¼ inch foam inserts, injected molded plastic inserts and a 2 mm Powertex crash panel. Shin Guards are available in a one size fits all model.
$79.99
Leatt's soft-shell 3DF impact foam knee pads just keep getting better and better. The Knee Guard 3DF 5.0 Junior has a totally new and refined sleeve construction with the latest material tech for riders who know that ventilation, fit and anti-slip are key and that great protection is a given. It features 3DF AirFit ventilated soft-impact foam, an abrasion-resistant Aramid outer layer for durability, and perforated materials for ventilation. CE tested and certified protection, it scores a total of 13 points in the Leatt protection rating system. - CE tested and certified as impact protection: Knee EN1621-1 - New 25% slimmer CE impact certified profile - New increased side protection - New wider, silicone-printed elastic cuffs - New 30mm low-profile elastic Velcro strap with easy-pull suede finger tabs - Anti-odor MoistureCool and AirMesh wicking fabrics - Pre-curved 3D design for better fit and function - Weight: 450g (pair)
$79.99
The 3.0 EXT are extended hard-shell guards with 3DF impact foam that offers premium protection. The hard-shell design means there's no sock/sleeve; instead, a strap system allows for easy on/off and possible over-the-pant fit. It features a slimmer knee pad profile and an improved sliding surface, and offers a very nice fit with ergonomic left/right shapes. CE tested and certified protection that scores a total of 20 points in the Leatt protection rating system. - Hard-shell and 3DF AirFit ventilated soft impact foam - CE tested and certified as impact protection: Knee and shin EN1621-1 - Full shin extended length – EXT - New improved hard-shell sliding surface - 3D design for optimal fit with specific left and right sides - Slim shin plate that also fits inside boots - Weight: from 600g (1.32lbs) pair
$40.00
The Dakine DK Impact Spine Protector is add-on back protection that's compatible with multiple Dakine snow and bike packs. The proprietary foam displaces hard impacts in the event of a fall to minimize injury to the central back. Add an extra layer of protection with this CE EN 1621-1 certified protection. - DK Impact Foam displaces hard impact and protects the central back - Thin, flexible profile - CE EN 1621-1 certification - Fits inside multiple snow and bike packs
$99.99
- Body-mapped, impact-absorbing SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Ventilated SmartFlex hip pads allow airflow to keep wearer dry and comfortable - 4+ hour chamois to remain chafe-free (Not included on youth) - Moisture-wicking, UPF 50+ compression fabric - Side leg pocket - Women's short liner has high waist, yoga-style waistband, and longer inseam for a more comfortable fit - Machine washable - CE PPE II—15613 Impact Attenuation / 1621-1 coverage
$34.99
The Invisa-Lite elbow pads feature a lightweight, minimalist design. - Impact-resistant 3D foams - Breathable lycra - Interior anti-slip silicone band - Double and single needle heavy-duty stitching - Protection Area: Elbow - Pad Type: Foam
$99.90
The Carve models manage without hard shells and are therefore light and extremely comfortable to wear. They are ideal for somewhat harder use and, with the integrated Xmatter padding concept provide high impact absorption and protection. With the Carve Evo+ iXS introduce product properties like exchangeable padding, structurally improved AeroMesh of newest generation offering a higher level of comfort and structural strength. - Xmatter Protection Foam (exchangeable) - AeroMesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort - Looplock Closings - Silicon Stopper - En1621-1:2012 Certified - Adult-sized
$124.90
That voice in your head that’s telling you to back off and slow it down—yeah, you don’t need to listen to him. . iXS’s Mallet Knee/Shin Guards have you covered, literally. They are lightweight, loaded with high-tech features, and they fit securely to give you extra confidence. The AeroMesh material is lightweight and extremely breathable to help keep your legs cool and dry, even on hot summer days. And, it’s antimicrobial so it doesn’t absorb odor. Silicone strips inside deliver a no-slip fit and iXS’s LoopLock closures provide compression with maximum security. • ArmadilloDuo: dual-density padding made from flexible, shock absorbing thermoplastic • SqueezeBox: an articulating joint at the knee for a great fit with max comfort while pedaling • NockOut: vented 3D padding in critical areas including lower leg, upper leg, and inner/outer knees • KneeGusset: horseshoe-shaped gusset designed to keep pads in place during impact
$99.99
These great-value-for-the-money 3DF hip impact shorts offer the same comfort and features as Leatt's top models. Compression MoistureCool material with flatlock stitching and mesh ventilation ensure a comfortable fit and offer premium protection. They provide hip and thigh protection and score a total of 9 points in the Leatt protection rating system. Now you will return home with a smile on your face after every ride—even after a crash! - 3DF padding is CE tested and certified as impact protection: Hip EN1621-1 Level 1 - Extra-wide with comfortable waist stretch - Anti-odor MoistureCool and AirMesh wicking fabrics - Silicone-printed elastic leg cuffs - Pre-shaped 3D design for better fit and function
$19.99
- Knee/elbow pad combo pack in a mesh bag - Available in multiple kid-approved designs
$19.99
The Revive wrist support features a 4-way stretch elastic with a Stabalite buttress support to aid in preventing hyperextension. - One size fits most - Right-hand specific - Protection Area: Wrist - Pad Type: Foam
$29.99 - $39.99
Old School Neoprene guards are the most comfortable protective gear you will ever wear. Designed by Lizard Skins and manufactured in our Utah Facility. Made of 5mm perforated Airprene, 1/4 inch foam inserts, injected molded plastic inserts and a 2mm Powertex crash panel.
$99.99
This hard-shell lower arm and soft, 3DF impact foam elbow combination provides both comfort and premium protection. It's a great product for all soft pad users who are looking for a sliding, more protected lower arm but who are still looking for that soft elbow pad feel. Now with an improved sliding surface, perforated and vented sleeves, as well as a silicone-coated X-strap for that solid fit with ergonomic left/right shapes. It's CE tested and certified protection that scores a total of 13 points in the Leatt protection rating system. - Soft elbow guard with hard-shell forearm sliders - CE tested and certified as impact protection: Elbow EN1621-1 - New anti-odor MoistureCool and AirMesh wicking fabrics - Abrasion-resistant Aramid outer layer for durability - Silicone printed elbow grip - 3D design ensures a great fit that is very comfortable - Weight: from 300g (0.66lbs) pair
$24.99
- Protective padding for outer ankle bone - Sold in pairs
$39.99
- Body-mapped, impact-absorbing SmartFlex pads layered on top of a ventilated, soft inner foam layer allowing for maximum protection, comfort, and breathability - SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Anti-abrasion material at calf protects sleeve and skin against pedal strikes - Moisture-wicking, UPF 50+ fabric - Machine washable - Compression sleeves with grippers at the top and bottom to keep guards in place - CE 15613 impact with 1621 coverage