Filter By:
Riser
$259.99
- Full UD carbon construction
- Textured surface at bar clamp and grip areas
- 35mm oversized clamp diameter
- 800mm width
- 7° back sweep
- 5° upsweep
- ISO-Mountain safety certified
- 225g
$259.99
- Full UD carbon construction
- Textured surface at bar clamp and grip areas
- 35mm oversized clamp diameter
- 800mm width
- 7° back sweep
- 5° upsweep
- ISO-Mountain safety certified
- 225g
$219.99
- Full UD carbon construction
- 31.8mm clamp diameter
- 9-degree back sweep
- EN-Mountain safety certification
- Upsweep / Drop: 4-degree
- Back Sweep / Bend: 9-degree
- 200g
$203.45
- The FatBar Carbon is the ultimate DH race handlebar.
- This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.
$203.45
An ideal handlebar for riding anything from all mountain to downhill, Renthal's FatBar Carbon handlebar combines a blend of strength, stiffness, shock absorption, and weight savings.
- Uni-Directional carbon construction
- Ride-tuned to provide an ideal combination of stiffness and shock absorption
- Increased center section width for fine-tuned flex characteristics
- Downhill and twin crown fork compatible
- Permanent graphics, set-up grid and cut marks
$203.45
- The Fatbar Lite Carbon 35 is the ultimate light-weight, trail-proof handlebar.
- Designed for Trail, Enduro and XC riders and racers, the Fatbar Lite Carbon 35 is the clear market leader in terms of weight, strength, stiffness and most importantly, ‘rid
$201.95
Thomson's Carbon MTB bars are made with three different fiber types for strength, durability and long times in the saddle.
Thomson's MTB Carbon Cross Country Handlebar is a flat bar with an off center clamp area allowing a flat riding position and reversible for a 5mm drop. It also has 8° of backsweep for comfort and 730mm in width for plenty of leverage.
The bars are made with three different fiber types with different tensile strength and tensile modulus, including high strength carbon fibers. This helps to allocate stiffness and flex where needed.
The bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders.
All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus.
1.5K woven impact ends help prevent damage to unidirectional fibers from shortening the bar or impact with the ground. With a light weight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+.
Friction Paste recommended for installation
$201.95
Thomson's Carbon MTB bars are made with three different fiber types for strength, durability and long times in the saddle.
The MTB Carbon Trail Handlebar is built for strength with enough flex built in for all day comfort. It’s strong enough for all mountain/trail riding and light enough for racing.
The bars are made with three different fiber types with different tensile strength and tensile modulus, including high strength carbon fibers. This helps to allocate stiffness and flex where needed.
The bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders.
All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus.
1.5K woven impact ends help prevent damage to unidirectional fibers from shortening the bar or impact with the ground. With a light weight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+.
Friction Paste recommended for installation
$200.00
- Unidirectional carbon fiber riser bar with 35mm stem clamp area
- Downhill strength with 25% weight savings compared to aluminum
$200.00
Proven shape, proven width, proven materials, and the artistic touch of Troy Lee Designs: voilà, the TRUVATIV CoLab TLD Carbon riser bars. These bars are stiff, tough, dependable, and give you all the comfort and positive steering feel you want. This is art on your bars for artistry in the corners.
- Stiff, precise, and width-optimized for enduro, trail and aggressive xc
- Carbon fiber perfection
- DESCENDANT geometry from their best enduro rider’s input
- Signature Troy Lee Designs style
$199.95
The WCS Carbon Logic-E Rizer bar ties together Ritchey's historic mountain biking heritage with the demands of today's modern electronic drivetrains. Designed to accommodate the internal routing of Shimano EW-SD50 wires for either Shimano Di2 or STEPS systems, this bar is built to be light and compliant for incredible durability and a supple, refined ride. The WCS Carbon Logic-E Rizer is the choice for XC riders looking for a high-end carbon eMTB bar that's built for performance. The WCS Carbon Logic-E Rizer features Ritchey's proven WCS carbon technology in a 15mm-rise bar with a textured stem clamp area to reduce the risk of bar slippage.
- Material: carbon fiber
- Width: 780mm (cutting not recommended)
- Rise: 15mm
- Backsweep: 9°
- Upsweep: 3°
- Clamp diameter: 31.8mm
- Bar-end compatible: no
- Weight: 175g
- Electronic compatibility: Shimano Di2 / STEPS (Shimano EW-SD50 cable—internal routing)
- For proper assembly, stems with open faceplates are required, such as the Ritchey C220 Trail.
$194.00
On the big days, it's the small comforts that make the ride better, longer. That's why we re-engineered our carbon riser bars to improve feel, flex and rider positioning and reduce trail buzz. These bars are stiff, precise and forgiving. With a re-tuned carbon laminate, your shoulders, arms and hands keep fresh all day.
- Available in 760mm carbon with 20mm rise
- 35mm clamp
- Super-wide to start and trimmable by 40mm (20mm each side)
- Specialty tuned carbon laminate to absorb noise while maintaining stiffness
SPECIFICATIONS
- Type: Riser
- Clamp Diameter: 35.0mm
- Width: 760mm
- Rise: 20mm
- Backsweep (degrees): 7
$194.00
RIP, NO RATTLE.
Arm fatigue is real. The solution? More muscle. Or, our new carbon laminate, made to tackle the trail buzz, not transfer it. We re-engineered our bars to improve rider position (adding 5mm rise) and reduce the chatter transferred to the hands and arms. These bars offer the right bit of flex while keeping things stiff, precise, and responsive.
Features:
- Super-wide to start and trimmable by 40mm (20mm each side)
- Specialty tuned carbon laminate to absorb noise while maintaining stiffness
Specifications:
- Clamp Diameter: 35.0mm
- Width: 800mm
- Material (HB): Carbon
- Rise (HB): 25mm
- Type (bar): Riser
- Backsweep (degrees): 9
- Upsweep (degree): 5
$194.00
It's Stiff, Not A Stiff.
It's the little things that matter most. That's why we scrutinized our carbon riser bars, tasking our pros and engineers to make great even better. The result? We added 5mm to the rise of our widest bar; and fine-tuned the carbon laminate. This translates to an improved riding position, more feel and flex, and less arm fatigue making your time on the trail more smiles, less chatter.
Features
- Super-wide to start and trimmable by 40mm (20mm each side)
- Specialty tuned carbon laminate to absorb noise while maintaining stiffness
Specifications:
- Clamp Diameter: 31.8mm
- Width: 760mm
- Material (HB): Carbon
- Rise (HB): 20mm
- Type (bar): Riser
- Upsweep (degree): 5
$194.00
It's Stiff, Not A Stiff.
It's the little things that matter most. That's why we scrutinized our carbon riser bars, tasking our pros and engineers to make great even better. The result? We added 5mm to the rise of our widest bar; and fine-tuned the carbon laminate. This translates to an improved riding position, more feel and flex, and less arm fatigue making your time on the trail more smiles, less chatter.
Features:
- Super-wide to start and trimmable by 40mm (20mm each side)
- Specialty tuned carbon laminate to absorb noise while maintaining stiffness
Specifications:
- Clamp Diameter: 31.8mm
- Width: 760mm, 800mm
- Material (HB): Carbon
- Rise (HB: 25mm
- Type (bar): Riser
- Upsweep (degree): 5
$190.00
Simply put, it's the perfect trail bar. The M6 bar is tuned for the dream combination of response, compliance, and high strength. Available in a traditional 25mm rise or a low 7.5mm rise, it sweeps back at 9 degrees and up 5 degrees, providing excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain.
- Material: Carbon Fiber
- Weight: 200g (25mm rise); 190g (7mm rise)
- Bar Width (Max): 780mm
- Bar Width (Min): 740mm
- Clamp Diameter: 31.8mm
- Sweep: 9 Degrees
- Tip: 5 Degrees
- Torque Spec: Face Plate: 5.5Nm
- Torque Spec: Controls: 5.5Nm
$190.00
An exceptionally strong carbon fiber 35mm riser bar that’s built to descend. The M7 bar is designed for the most aggressive and demanding riders. Carbon fiber is the ideal material for a gravity bar because fiber orientation and bar shape can be controlled independently and developed in unison, resulting in a tuned flex profile that cannot be achieved with aluminum. This bar is tuned to be precise and responsive while absorbing fatigue-inducing chatter and taking the sting out of the biggest hits. The M7 bar features a trail-perfect 8-degree backsweep and 4-degree upsweep for your long-travel 29er, enduro race bike, or downhill machine.
- Material: Carbon
- Weight: 230g (10mm rise); 240g (25mm rise); 245g (40mm rise)
- Bar Width (Max): 800mm
- Bar Width (Min): 780mm
- Clamp Diameter: 35mm
- Backsweep: 8 Degrees
- Upsweep: 4 Degrees
- Torque Spec: Face Plate: 5.5Nm
- Torque Spec: Controls: 5.5Nm
$190.00
A race-proven handlebar, the M9 bar is ENVE's dedicated downhill option. Designed around a 31.8mm clamp diameter and a downhill-focused flex profile, this bar’s celebrated ride feel defined the potential of a DH carbon fiber bar and realigned performance expectations. The M9 bar features 8-degree backsweep and 4-degree upsweep.
- Material: Carbon
- Weight: 245g (30mm rise); 265g (50mm rise)
- Bar Width (Max): 810mm
- Bar Width (Min): 780mm
- Clamp Diameter: 31.8mm
- Backsweep: 8 Degrees
- Upsweep: 4 Degrees
- Torque Spec: Face Plate: 5.5Nm
- Torque Spec: Controls: 5.5Nm
$190.00
Occupying a class all its own, our Winston Handlebar is a performance carbon mustache bar loaded with versatility and flare. Featuring a 25mm rise and 73-degree backsweep, it offers compatibility with road, mountain, and bar-end controls. Pretty enough to punch up commuter rigs and sport touring bikes alike, it's built tough to handle everything from rough, off-road conditions to long rides in the country. Comfortable in both the drop and riser positions, the unique and multi-functional Winston is sure to inspire upgrades and eye-catching custom builds.
- Compatible with road, mountain, and bar-end controls
- Tested to ASTM 3
- 90mm clamping area to fit Salsa Anything Cradle
- Can be ridden in up or down position
- Unidirectional carbon fiber construction
- Weight: 250g
$189.95
Light and compliant for incredible durability and a supple, refined ride, the Ritchey Rizer bar is the choice for XC riders looking for a high-end carbon bar that's built for performance. The WCS Carbon Rizer features our proven WCS carbon technology in a 15mm rise bar, a textured stem clamp area to reduce risk of bar slippage, and is reinforced internally to accept bar ends and shifter/lever clamps.
- Carbon monocoque
- 15mm rise
- 9-degree sweep
- Width: 740mm
- 31.8mm center section
- Matte UD carbon finish
- Weight: 180g
$184.99
- Features PFL (Plastic Foam Lamination) manufacturing
- PFL utilizes tiny particles and steam pressure in the lamination process to expand and shape the structure of the bars
- The process uses less excess resin and fewer plys, resulting in a 15% lighter bar
$184.99
Race Face's flagship carbon DH rated handlebar just got wider. With the push to 820mm the new Sixc 35 handlebar gives unprecedented control at high speed, just what you need for UCI DH races, high speed park laps, or that next challenging AM adventure. Featuring Race Face's tried and true sweep design to get you in the attack position on the bike and uses their UD carbon wrap that gives the Sixc 35 strength you can believe in at a mind numbing 235g. Save weight and gain control? You just lost an excuse…
- Manufactured from UD Carbon with matte clearcoat
- Carbon optimized flex for improved small bump compliance
- Gold Standard of DH is now wider and stronger
- 820mm width for maximum control
$184.95
Designed for Trail, Enduro and XC riders and racers, the Fatbar Lite Carbon is the product of an intense and in-depth research and development program. This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption
- Full uni-directional (UD) carbon construction with efficient orientation and placement of the fibers to maximize strength and fine tune stiffness
- UD carbon fiber layup is specific to each model and rise
$179.99
- Intended use: XC and Trail
- Proven design and durability of the Race Face Next SL bar with increased stiffness and lighter weight of the 35mm platform
- Manufactured from UD Carbon with matte clearcoat
- Requires 35mm bar clamp diameter stem
- 8 degree rearward sweep, 5 degree upward sweep
$179.99
The Next R handlebar features 800mm of premium unidirectional carbon with the shred-ready positioning of Race Face's SixC bars. DH strength and Enduro weight for when you really need to lean into it.
- Manufactured from UD Carbon with matte clearcoat
- Carbon optimized flex for improved small bump compliance
- 35mm bar diameter for incredible strength/weight ratio
$179.99
Race Face set an industry benchmark with the its Sixc product group - light and strong carbon DH rated crank and bar. Building on the unprecedented success of their proprietary Carbon Technology program, SIXC rewrites the rules in the 6-8 inch travel bike world.
SIXC (the C is silent, eh!) represents the culmination of years of Race Face engineering in both carbon and all mountain products. Race Face has created a bar for the aggressive rider who demands the ultimate in performance. Strong enough for DH, yet light enough to not hold you back on the pedal up to that new trail you have been hearing so much about, SIXC blows up the limits of carbon performance.
- SIXC bars are manufactured with a leading edge composite material which allows us to reach our high strength requirements at an impressively low weight
- Minimum bar width of 28" or 710mm at indicated cut marks
- Reinforced clamping zones for lock-on grip
- Daily destructive testing from each production run ensures each bar meets the exacting standards set by our engineers
$176.95
- The FatBar Carbon is the ultimate DH race handlebar.
- This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.
$170.00
DH tough and XC light, the Traverse SL 35 is our handlebar premiere, and capitalizes on our decades of carbon fiber experience to deliver precise control and exceptional comfort, along with class leading strength to weight performance.
Handlebars have grown wider in recent years, and this has presented some interesting challenges. Because bars are wider, leverage stress exerted at the stem has risen dramatically. The Traverse SL features a 35mm diameter at the stem clamp; this increases strength in this crucial zone, while also dissipating the bar clamp load across a larger surface area. More secure clamping, and a stronger handlebar - these are good things. Meanwhile, our extensive experience with carbon fiber allows us to ensure maximum strength at the clamp and then tailor the carbon fiber layup to providing damping at the bar-ends, resulting in a more comfortable, less fatiguing ride. The Traverse SL 35 is strong enough to attack the gnarliest terrain, durable and comfortable enough to hammer the chunder day in, day out, and light enough to make XC racers smile.
- Backsweep: 8 degrees
- Clamp: 35mm
- Rise: 30mm
- Upsweep: 6 degrees
- Weight: 227 grams
$146.60
- Light enough for XC, but strong enough for Enduro and Trail
- Carbon composite construction
- Reinforced and textured clamping areas, with markers for accurate shortening
- 5/8 degree with +10mm setback
$145.00
Mountain bike terrain is bigger and burlier than ever, so why shouldn’t your components be? Our Guide 35.0 Carbon handlebar increases front-end strength and stiffness for more precise handling inputs. The carbon fiber construction keeps weight to a minimum and soaks up trail chatter. Pair these carbon mountain bike handlebars with our Guide Trail 35.0 Stem and carve, drop, pump, and jump your way down the mountain with confidence.
- Bar Clamp Diameter: 35.0mm
- Color: Carbon
- Width: 760/800mm
- Rise: 10/20/40mm
- Back Sweep (deg): 8 degree
- Upsweep: 5 degree
- Material: Carbon
$145.00
The No.9 35.0 Mountain Carbon Handlebar is designed and built for the most extreme trail and all-mountain riding. The oversized stem clamp adds to front-end stiffness for precise input, while the carbon construction provides vibration damping in a lightweight and durable package.
- Unidirectional carbon fiber construction
- 35mm stem clamp
- 8 degrees of backsweep with 5 degrees of upsweep
- Trimmable ends, made easy with graphic markings
- Rated to ASTM Condition 4 for extreme off-road riding
$140.00
Whatever your adventure, Rustler handlebars are tough, durable, and comfortable. Whether you are out exploring a new trail or devouring your favorite descent, they’ll help keep you in control and ready for the terrain ahead.
- Signature 11° back sweep, 6° up sweep, 20mm rise
- 800mm and 750mm width options
- Graduated lines for easy trimming
- 31.8mm clamp diameter with 160mm width for use with Salsa Anything Cradle and aerobars
- Weight: 221g
- Note: Rustler bars are not compatible with bar ends
$139.00
A 35mm clamp bar with 20mm and 35mm rise options and 800mm width
- 9-degree backsweep and 5-degree upsweep for comfort at all angles
- Race model utilizes an engineered carbon layup for ideal trail feel and fatigue reduction
- Plus model uses 7050 aluminum for an ideal strength-to-weight ratio
- Base Handlebar uses 6061 aluminum
$134.95
Thomson MTB Aluminum Handlebar 800mm 35mm Rise 9degree back 5 degree up 35.0 clamp.
- Produced from 7050 alloy then butted and tapered for optimal fatigue life
- Produced with an advanced hydraulic forming press to ensure consistent wall thickness and exact tolerances
- Bar Clamp Diameter: 35.0mm
$129.99
- DH and Freeride, ultra-wide, 820mm wide handlebar
- Big and burly 35mm barclamp with increased strength and stiffness compared to conventional 35mm alloy bars
- Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness
- Shot-peening and anodizing enhances fatigue life even further
- Weight optimized and adjustable to 760mm
Features:
- Key Technologies: Vibrocore, Dual XGT, CNC Bending, MGR, Big-Taper (105mm) design
- Material: Zirconium Doped 7-Series Alloy
- Weight: ±300g
- Diameter: 35mm
- Rise: 25mm
- Length: 820mm
- Geometry: 5° up x 8° back
- Finish: Shot peen anodized, decal logos
$123.95
Wide, smart and strong, Thomson's Aluminum Handlebars love ripping trails as much as you. With a low rise and proper sweep, you get plenty of stability and control on even the sketchiest terrain. They're made of tough 7050 aluminum and hydraulically press formed for consistent thickness and tolerance, especially in tapered sections of the bar, which means you get exceptional quality and strength. With a 90mm middle section on the downhill bars, using a wide-set, direct-mount stem is no problem. On top of all that, these lightweight bars have the beautiful, subtle, all-black Thomson look.
$109.99 - $119.99
Broc Raifrod's new signature BROC bar is built around the popular Odyssey Lumberjack XXL bar shape but uses a more narrow "pre-cut" 29" width and slightly less backsweep at 10 degrees.
- 41-Thermal Lifetime Warranty
- 1.8/1.3mm thick, multi-butted main tubing
- Butted, traditional 7/8? crossbar for strength
- Large radius bends for greater durability
- Post-weld heat-treated
$115.00
The SL-K Riser Bar is the ultimate mix of light weight and strength for a handlebar that is designed for all types of riding. Its CSI (Carbon Structural Integration) construction marries the best of both worlds of carbon and aluminum. The carbon helps keep the vibration to a minimum, while the aluminum core maintains a majority of the strength. The SL-K handlebar is XC weight-matched with Enduro strength. With a solid 740mm width and 18mm rise, this bar will help with a perfect fit, great control, and peak performance for even the most demanding rider in mind.
- UD carbon and AL6066 material
- Carbon Structural Integration (CSI)
- Textured stem clamp zone
- 18mm rise
- 9° backsweep, 4° upsweep
- UD carbon finish
$114.99
- Completely redesigned geometry 780mm wide for the aggressive Trail or All Mountain rider.
- Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness
- Shot-peening and anodizing enhances fatigue life even further
- Adjustable to 740mm
- Key Technologies: Vibrocore, Dual XGT, CNC Bending, MGR
- Material: Zirconium Doped 7-Series Alloy
- Weight (g): ±270g (15) / ±275g (25)
- Diameter (mm): 31,8
- Rise (mm): 15 / 25
- Length (mm): 780
- Geometry (deg°): 5° up x 7° back
- Finish: Shot peen anodized, decal logos
$114.99
- DH Race tuned award-winning alloy handlebar design, developed with World Cup professionals
- Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness
- Increased strength and stiffness compared to conventional alloy bars
- Shot-peening and anodizing enhances fatigue life even further
- Adjustable to 740mm
Features
- Key Technologies: Vibrocore, Dual XGT, CNC Bending, Impact Ends, MGR Super 6 Alloy
- Material: MGR Super 6 Alloy
- Weight: ±340g (15mm) / ± 350g (30mm) / ±360g (50mm)
- Sweep: 4° up x 8° back
- Finish: Shot peen anodized, decal logos
$111.99
Origin-8's Classique CargoUnit is a fine 6061 T6-aluminum riser handlebar with a built-in basket. It's the answer to bolt-on baskets and bags that are often unstable. Because the basket is integrated into the bar, your gear rides on a secure, sturdy platform with room for groceries, a gym bag, and a couple burritos. The CargoUnit has a heavy-duty powder-coat finish, too.
$110.45
- The Fatbar has already gained cult status and is the handlebar of choice for World Cup downhill race teams and athletes.
- Offers the ultimate combination of lightness, strength and durability
$109.99
A traditional looking 4-piece bar that uses larger radius bends, thicker walled, butted tubing and a traditional 7/8" crossbar for strength and durability.
- Multi-Butted, traditional 7/8" crossbar for strength
- Large radius bends for greater durability
- Welded end caps to reduce flex
- Post-weld heat-treated for added strength
$104.99
The Super Highway bar is a mid-rise bar that comes with Odyssey's legendary 41-Thermal lifetime warranty.
- 1.8/1.3mm thick, multi-butted main tubing
- Butted, traditional 7/8? crossbar for strength
- Large radius bends for greater durability
- Post-weld heat-treated
$104.99
A25 Alloy Riser Bar
- Cut marks provide a range of width options
- Textured Grit Grip finish in clamp areas eliminates over-tightening of components
$102.45
- High strength 7 series Aluminium Alloy
- Shot peened for increased fatigue life
- Corrosion and abrasion resistant hard anodized finish
- Laser etched positioning grid for easy set up
- Width marks allow personalized fit adjustment
- Permanent Graphics
$102.45
- The second version of the Fatbar has undergone a full structural re-design.
- In keeping with the demand for wider, gravity oriented handlebars, the width increased to 800mm.
- Proven high grade 7050 T6 aluminium and variable gauge taperwall construction
$102.45
- The second version of the Fatbar has undergone a full structural re-design
- In keeping with the demand for wider, gravity oriented handlebars, we have increased the width to 800mm
- Our proven high grade 7050 T6 aluminum and variable gauge taperwall tubing is the key ingredient of the Fatbar
- With careful and efficient use of material, we have massively reduced the weight to a trail-worthy 315g
$100.00
Truvativ design built in collaboration with, and featuring the creativity of, Troy Lee Designs. The Truvativ CoLab TLD bar is the command center of cornering with an artistic flair.
- Includes Rockshox sticker pack to give fork and handlebar a unified custom look
- Stiff, precise and wide
- Signature Troy Lee Designs style
- Geometry and 7050 aluminum are designed for DH and gravity events
- Back Sweep (deg): 9
- Upsweep: 5
- Weight: 349g
- Material: Aluminum
$99.99
- AL7050-T6 tubular alloy construction
- 35mm oversized clamp diameter
- 800mm width
- 7°/8° back sweep (Depending on rise dimension)
- 5° upsweep
- ISO-Mountain safety certified
- 290-335g (Depending on rise dimension)
$99.99
- AL7050-T6 tubular alloy construction
- 35mm oversized clamp diameter
- 800mm width
- 7°/8° back sweep (Depending on rise dimension)
- 5° upsweep
- ISO-Mountain safety certified
- 290-335g (Depending on rise dimension)
$99.99
- AL7050-T6 tubular alloy construction
- 35mm oversized clamp diameter
- 800mm width
- 7°/8° back sweep (Depending on rise dimension)
- 5° upsweep
- ISO-Mountain safety certified
- 290-335g (Depending on rise dimension)
$79.99 - $99.99
Origin-8's Space Off Road II Handlebar is ready to explore the final trail frontier. This radical bar is crafted from lightweight aluminum and features a 50mm sweep and 37.5mm rise. But it's not just for looks — it lets you distribute your weight and hand placement in multiple ways for more control and comfort.
$99.99
TruVativ is proud to announce the TRUVATIV CoLab Series, a collection of bars specifically engineered to match the demands of each signature athlete's discipline and riding style — and to enhance each rider's cockpit interface.
- Upsweep: 5°
- Backsweep: 9° (760mm bars)
- Backsweep: 7° (all other bars)
$99.00
- The original Chromag bar
- Used from XC to DH, the OSX is Chromag's most versatile option
- 31.8mm clamp
Specs:
- Rise: 25mm
- Handlebar Width: 800mm
- Stem Clamp Diameter: 31.8mm
- Handlebar Material: Aluminum
- Upsweep: 5 degrees
- Backsweep: 8 degrees
$98.00
- Super wide 800mm Enduro/Freeride/Downhill riser bar
- Custom drawn 7000 series alloy provides highest strength to weight of all Chromag bars
$94.00
- Super wide 800mm Enduro/Freeride/Downhill riser bar
- Custom drawn 7000 series alloy provides highest strength to weight of all Chromag bars
$90.00
Intended for dirt jumping, and your trail or DH bike if you need the extra rise.
$90.00
Intended for dirt jumping, and your trail or DH bike if you need the extra rise. The FU50 is the exact same platform as the FU40, but with 50mm of rise!
$89.99
The 10-4 bar features large radius bends, thicker walled butted tubing and a traditional 7/8" crossbar.
- 41-Thermal processed 4130 chromoly
- Multi-butted
Page 1 of 3
Next page