- Powermeter Crank Arm Bolt Kit and AXS Cover Plug Drive Side M18/M30 Dub Steel Black Rival D1
- Rear Derailleur GX 1X11 B Bolt and Limit Screw Kit
GXP Shield and Wave Washer
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
Clamp allows use of a braze-on derailleur on frames without the braze-on tab. Includes a tab to use SRAM's lightweight and easy-to-adjust chain control device. - Fits all SRAM road braze-on front derailleurs - ChainSpotter not included
M15/M26 Alloy GXP Crank Arm Bolt Kit
- Lever Internals Gen 2 Level Ultimate/TLM/TL Qty 1
Trigger Clamp/Bolt Kit For X0 X9 X7
Original equipment rear derailleur pulleys for SRAM rear derailleurs. - NX/SX Eagle Rear Derailleur Pulley Kit
BB30 Spacer - 15.46mm
- Chainring bolts for Rival D1 2x cranks
$6.00 - $28.00
Flat Mount Disc Caliper Bracket Bolts
Original equipment ceramic bearing pulleys and inner cage for SRAM XX1 Eagle rear derailleurs.
Useful on some bikes with 135mm rear dropout spacing that have cranks with longer spindles.
Original equipment rear derailleur pulleys and inner cage for SRAM X01 Eagle rear derailleurs.
Original equipment hydraulic hoses for no-compromise brake performance. - Fits All B (2016+) Versions of Guide RSC RS R - Hose length: 2000mm
Replacement hoods for SRAM hydraulic shifter/brake levers.
Ergonomic design for comfort in a variety of hand positions. -Compatible with SRAM eTap Shifting/Brake Levers
SRAM BB30/English Bottom Bracket Adaptor allows conventional threaded bottom brackets to be installed in a BB30 frame; 68mm shells only - Install with headset press and green Loctite
Original equipment rear derailleur pulleys for SRAM rear derailleurs. Fits X01, X01DH, X1, GX 1x11, NX, Force CX1, Force 1, Rival 1, Apex 1 Derailleurs. - Wide-narrow pulley tooth profile holds the chain better - Stainless steel sealed cartridge bearings
Force eTap AXS Rear Derailleur Pulley Kit - Steel bearings - 12-Speed
Disc Brake Adaptors - Includes Stainless Bolts
Original equipment ceramic bearing pulleys for SRAM rear derailleurs. - Chain Compatibility: SRAM XX1
Zipp Speed Weaponry Bolt Kits Compatible With: - HB-VKAL-CLIP-A1, HB-VKAL-CLIP-B1
Replacement extension tower for Zipp aerobars. Compatible With: - HB-VK-STLH-A1
- Lever Assembly, Aluminum lever Gen 2, Black (assembled, no hose, and includes barb and olive), Guide R
- SRAM, Road pulleys, 11.7515.060.000
- Includes barb and olive - Brake Lever Clamp: 22.2mm, MMX compatible - Lever Blade Material: Carbon - Reach Adjust: Tool-free
External Blip mount for aero extensions and base bars - 360 degree rotation for adjustment - Aero use only to fit 22.2mm OD bar 65mm in length - Fits all Zipp aero extensions and base bars - Blips not included - Weight: 57 grams for pair (does not include Blip) - Material: Polypropylene + TPE - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
SRAM PressFit 30/English Bottom Bracket Adaptor allows conventional threaded bottom brackets to be installed in a PF30 frame. - Not to be used with internal threaded bottom brackets; compatible with BBs that use two external cups
- Lever Internals Gen 2 Guide R/RE/DB5|Code R Qty 1
Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes
$19.00 - $24.00
Disc brake mount adaptor. - Includes stainless steel adaptor and caliper bolts
Replacement parts for Zipp aerobars. Compatible With: - HB-VK-STLH-A1
- Includes: 2-16mm &2-14mm Aluminum Caliper pistons, Seals & O-rings—Guide Ultimate
RockShox AXS Remote for AXS dropper seatpost.
Red eTap battery terminal cover
Hose fittings fit many of SRAM's newest hydraulic brake models. - Includes 5 Threaded Hose Barbs, 5 Compression Fittings, 1 T8 Torx Wrench - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes
Hose fittings fit many of SRAM's newest hydraulic brake models. - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes
- Replacement Stealth Ring elastomer set for XG-1090 X-Dome cassette - Fits 11-23
- GX Eagle Rear Derailleur B-Bolt and Limit Screw Kit Hex5
- Lever Assembly, Aluminum lever Gen 2, Black (assembled, no hose, and includes barb and olive), Guide RS
Replacement parts for Zipp aerobars. Compatible With: - HB-VKAL-BS1-A1, HB-VKAL-BS1-A2, HB-VKAL-CLIP-A1, HB-VKAL-CLIP-B1, HB-VKAL-EXT-A1, HB-VKAL-EXT-A2
- GX DH/X01DH 7 Speed Rear Derailleur B-Bolt and Limit Screw Kit Hex5
X01 Eagle Cable Anchor Kit
The SRAM Universal Derailleur Hanger (UDH) consolidates thousands of hanger options across the industry, while protecting your derailleur against chain jams by pivoting back and out of the way, and slipping slightly when encountering impacts. It improves shifting performance, guarantees better alignment, and works with all drivetrains. - The Universal Derailleur Hanger consolidates thousands of mountain bike derailleur standards - UDH is designed to rotate rearward in the event of impact, and features the ability to “re-rail” the chain back onto the small cog - It works with all commercially available MTB and E-MTB drivetrains from Shimano to Box to Sunrace
GX Eagle Rear Derailleur Pulley Kit
Replacement hydraulic shift/brake lever only. Brake caliper not included - Rubber hood sold separately - Includes 2000mm of hose
- Titanium rotor bolts - T25 bolt head
- Lever Assembly, Aluminum lever Gen 2, Black Ano (assembled, no hose, and includes barb and olive), Guide RSC
- Lever Internals Gen 2 Guide RSC/Ultimate|Code RSC Qty 1
The AXS battery cover is a light-weight cowling designed to protect the battery while installed on the derailleur. The AXS Battery Cover fits all AXS mountain bike derailleurs.
Spindle spacers and kits allow BB30 cranks to be used in a variety of BB shells. - Use this kit to install these SRAM and Quarq BB30 road cranks in BB386 frames: Force 22, S900, S950, Red power meter, DZero Carbon, DFour, Elsa, Riken
TT Brake Lever Hardware Kit
Customize your ride with SRAM bar end plugs.
SRAM Caliper Brake Adjusting Barrel with Nut and Cable Fixing Assembly.
Brake Pad Spreader Springs - Available for Guide Ultimate and Guide X0 brakes
- CHAINRING BOLT KIT 5X2 M8.5X7 / M8.5X5 STEEL BLACK, HIDDEN BOLT INCLUDING SPACER QTY 5
Page 1 of 2 Next page