Mother Nature is always in flux, but mankind is both smart and adaptable. In other words, whenever she changes her mood, we always have the right tool for the job. And when that job is protecting against blustery, cold conditions, the right tool is our Deflect Comp Shoe Covers. Compared to our Element line of shoe covers, Deflect places more of a focus on wind resistance, so you'll find a stretchable construction with lightweight insulating properties. And to make getting in and out of the covers easy, we also included a rear zipper. - Deflect fabrics feature a good amount of stretch and a brushed back interior to ensure a light level of insulation. - Abrasion-resistant bottom and toe panels increase the lifespan. - A universal cleat opening makes these covers compatible with either road or mountain shoes. - Reflective elements. - Rear Velcro closure.
Depending on where you live and ride, full shoe covers might be a little too aggressive for the conditions at hand. That isn't to say that it isn't cold, though—you just might be better suited with something like Specialized Element Windstopper Toe Covers, instead. These toe covers feature a Gore Windstopper Soft Shell construction that ensures superior levels of breathable insulation, plus reliable resistance to both wind and water. The result? Warmth and protection right where you need it, without running the risk of overheating. - Gore Windstopper Soft Shell provides resistance to both wind and water, without sacrificing anything to breathability, comfort, or layering ability. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Universal cleat opening means that the covers are compatible with both road and mountain shoes. - Reflective elements increase your visibility to motorists in low-light conditions. - Small/Medium: sizes 38 – 43 - Large/X-Large: sizes 44 – 48
Key features: - Compatible with all BOA equipped Bontrager shoes except Circuit and Sonic - Mix-and-match buckle and shoe colors to get a unique and customized look - Left/right specific design - BOA IP1 dial kits include dial, 1m of lace, T6 tool, and instructions - Red dials only include the dial - no lace - For additional service/warranty information visit: www.boatechnology.com
Key features: - Genuine replacement heel studs for your Bontrager road shoes - Maintains traction when walking off-the-bike - Includes mounting screws
Need to replace your buckle? Bont's Standard Buckle Kit includes a pair of buckles, loop, a pair of ladders and screws. Just grab a small screw driver and you can easily replace your current buckles. Please note that you can only replace the buckle on your shoe with the same buckle kit that the shoe came with. You cannot replace a Standard buckle with a Slimline buckle.
Your cycling shoes thanklessly accompany you through the toughest intervals in nature's worst conditions. Thank them and keep them ticking along with Specialized's Replacement Heel Lugs. These lugs replace the worn-out tread on your S-Works and Pro model road shoes. -Fits 2012 and earlier S-Works shoes -Fits all Pro Road shoes -Heel lug only -Sold in pairs; includes screws
These 3mm stackers can easily correct the common issue of leg length inequality. - External cleat lift for addressing leg length inequality - Shaped to fit SPD SL, Look KEO and Speedplay - Includes longer screws - Package includes 4 cleat stackers
S2-Snap Boa cartridge assembly kit for personalizing your shoes. Includes: One left cartridge dial assembly, one right cartridge dial assembly, two laces. Compatible with following models: - S-Works Road - S-Works XC - Women’s S-Works XC - Pro XC - Women’s Cascade - Rime Expert - Comp MTB - Women’s Motodiva
Wore out the laces on your S-Works Sub6 shoes? Don't fret, Specialized has your replacement laces right here. Now lace 'em up and get riding.
All new external varus wedge fits between the cleat and the sole of your shoe for the perfect hip, knee and foot alignment. - External varus/valgus cleat wedge - Provides one-degree of varus/valgus correction - Shaped to fit SPD SL, Look KEO and Speedplay - Package includes eight wedges
Key features: - Low-profile, micro-release ratchet buckle - Compatible with 2014-Current shoes - Left/right-specific design - Sold in pairs - For optimal hold, it's highly recommended to also replace the ratcheting straps
Allows simple, removable, in-shoe adjustment to the forefoot varus/valgus angle for optimum foot, knee, and hip alignment. - Reversible shims work for right or left application - Vented for comfort - Package includes two varus shims (orange) or two valgus shims (yellow), based on selection
Moisture management is one of the most important elements of winter cycling and can make or break a ride. On long rides in extreme conditions, having a spare pair of 45NRTH's Wølfgar boot liners means you can ride confidently knowing that you have a dry, fresh pair when you need it. Constructed with a wool/polyester blend for durability, Wølfgar's liner boot wicks moisture away from your skin while still maintaining its insulation value to keep your feet dry and comfortable. Hook-and-loop on the heel secures the liner inside the shell boot. For use with 45NRTH Wølfgar boots only (sold separately)
- SPD compatible - Single release - Hardware included
Beautiful biomotion The Halo S1 Softshell Shoe Cover is your answer for day and night detectability at temps at or above 30-degree F/-1-degree C. With both high-viz color and reflective material in a single garment, Halo provides ultimate visibility, day or night. Key features - Choose the right gear for your climate—S1 for above freezing, S2 for below - Profila Softshell fabric for water resistance and windproof protection in cold and wet conditions - Provides biomotion visibility to ensure you're seen by motorists day or night - YKK zipper for easy on/off - Designed for use with road or mountain shoes for maximum versatility - Reflective main materials enhance bio-motion visibility for maximum safety - Fitted cut provides streamlined shoe fit even with dial and buckle closures
Key features: - Low-profile, micro-release ratchet buckle - Compatible with 2013 and older shoes - Left/right-specific design - Sold in pairs - For optimal hold, it's highly recommended to also replace the ratcheting straps
Warm feet are happy feet Extend your riding season with the S2 Softshell Shoe Cover. Designed specifically for insulation and weather protection over your regular footwear, this cover will keep your feet warm and dry in temps below 30°F/-1°C. Key features - Choose the right gear for your climate—S1 for above freezing, S2 for below - Profila Neoprene for insulation and protection in cold and wet conditions - YKK zipper for easy on/off - Designed for use with road or mountain shoes for maximum versatility - Reflective main materials enhance biomotion visibility for maximum safety - Fitted cut provides streamlined shoe fit even with dial and buckle closures Details - Fiber Content: 79% Rubber / 15.5% Nylon / 5.2% Polyester / 0.3 Polyethylene
Specialized's BG Footbeds were developed by biomechanical expert, Dr. Andy Pruitt of the Boulder Center For Sports Medicine. Their amazing, ergonomic shape increases power, endurance, and comfort, while optimizing hip, knee, and foot alignment. You'll be amazed how much nicer your shoes fit and feel! - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Customized longitudinal arch and metatarsal support with Red+, Blue++, or Green+++ contour. - Proprietary lightweight foam avoids taking a compression set for long-lasting performance. - Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits.
Your road shoes weren't made for walking, but that's just what you did. We can't blame you, though, especially when installing a Replacement Road shoe Heel Lug is so darn easy. Just install these on your S-Works Road shoes (2012 and earlier), and feel the tread under your feet again. - Replacement tread for S-Works 6 and Sub6 - Heel Lugs Only - Sold in pairs; with screws
Get the advantage of more grip with the Sabertooth Toe Spike Kit. The super-strong forged aluminum design easily mounts to any mountain bike shoe with front toe ports for a tighter grip when navigating cyclocross barriers, run-ups, and any off-bike section in less than ideal conditions. Key features: - Aggressive, earth-churning design - Made from precision forged stainless steel - Includes stainless steel mounting hardware
Bontrager inForm BioDynamic insoles with Superfeet are engineered to harmonize the interface between body, shoe, and bike, giving you the complete foot support you need to ensure mile after mile of pain-free pedaling. Models are color-coded: Red is low; Yellow is mid; Blue is High. - Engineered for unparalleled foot control, pedaling efficiency, and comfort - 3D Arch Pillar provides optimal arch support for improved knee alignment - Precision molded heel cup helps stabilize and align the foot - Footrest metatarsal pad helps reduce or eliminate hot foot - inForm BioDynamics—Optimizes natural movement for sustained, higher performance
• Replacement ratchet set for Louis Garneau's Monte shoes (sold separately) • 2 pieces
When riding in cold and wet weather, our body’s extremities are usually the first to suffer from the cold. Garneau's Neo Protect II Shoe Covers are designed to keep your feet warm and protected so you can continue riding no matter what the weather has in store. Boasting 3mm of windproof neoprene, they create a barrier between you and the wind and cold. You'll love the Velcro backs that make for easy on/off and the reflective logos for enhanced visibility!
• Replacement ratchet tongue for selected styles of shoes • 2 pieces • 93mm
Key features: - Replacement strap for buckled Bontrager Road and MTB shoes - Compatible with 2009-2015 shoes, or all straps with this shape - Sold in singles - For optimal hold, it's highly recommended to also replace the buckle
Need to replace your buckle? Bont's Slimline Buckle Kit includes a pair of buckles, loop, a pair of 9 cm ladders and screws. Just grab a small screw driver and you can easily replace your current buckles. Please note that you can only replace the buckle on your shoe with the same buckle kit that the shoe came with. You cannot replace a Slimline buckle with a Standard buckle.
If you lost or damaged the Warp Sleeve on S-Works Sub6 road shoes, you have no reason to fear—Specialized has the replacement. Pick up a pair and start saving those seconds again.
Your S-Works MTB shoes thanklessly accompany you through nature's muddiest, toughest conditions, so thank them and keep them ticking with Specialized's Replacement S-Works Mountain Shoe Lug Kit. These lugs replace the worn-out tread on your S-Works Mountain shoes. •Includes heel, ball, and toe pieces •Includes toe spikes •Sold in pairs; includes screws
• Replacement ratchet set for selected styles of Garneau's shoes • 2 pieces
These shoe covers are equipped with a patent-pending top zip opening that provides added aeration and allows riders to adjust shoes bearing a dial closure while riding. FABRICS: -NEOPRENE EXTREME 3 MM: Warmth, blocks cold and water DETAILS: -Patent-pending Thermo Air technology: Sealed zip opening at side allows easy access to attach system and provides aeration -Silicone elastic at the cuff: Better fit and prevents infiltrations Back opening with seam-sealed zip: Easy pull-on and water resistant -Sealed tape on seams: Water resistant -Water resistant -Flatlock seams: Enhanced comfort -Reinforced kevlar under sole: Better durability -Reflective puller
Page 1 of 2 Next page