Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Hubs

$53.99
Shimano XT M756 front hub.
- Double contact sealing
- Super polished bearing races for low friction rolling
- Light alloy QR lever and nut
- 6-bolt ISO disc mounting surface

$135.00
High quality sealed bearing hub is available in traditional and modern configurations.
- Steel axle, aluminum end caps with steel knurled contact surfaces
- Same proven driver mechanism as higher priced models
- Spoke Interface: J-Bend
- Hub/Brake Compatibility: 6-Bolt Disc
- Skewer Included: No
- Bearing Type: Sealed Cartridge

$74.00
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 716 front hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. TPlus, tough cartridge bearings roll smooth for the long haul.

$99.00 - $117.00
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 746 rear hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. Plus, tough cartridge bearings roll smooth for the long haul.

$209.99
Whether it's a custom build or just a replacement, these hubs are the foundation for a high quality wheelset.
Product details
- Bontrager rear hub for use with 197mm dropouts
- Rapid Drive 108 hub instantly transfers effort into forward momentum
- Flange diameter: 58mm
- NDS flange offset: 59.5mm
- DS flange offset: 46mm
- 32 hole, 6-bolt rotor

$119.99 - $196.99
- Elite Series convertible road disc hubs
- Available in multiple axle configurations
- Straight pull and J-bend spoke options
- 6 bolt and Center Lock disc brake rotor options
- Sealed bearings
- Material: AL6061
Straight Pull Spoke/6-Bolt Disc:
PCD-L: 36mm
PCD-R: 36mm
LTF-L: 27.75mm
LTF-R: 15.25mm
CTF-L: 22.25mm
CTF-R: 34.75mm
J-Bend Spoke/Centerlock Disc:
PCD-L: 45mm
PCD-R: 45mm
LTF-L: 27.25mm
LTF-R: 15.45mm
CTF-L: 22.75mm
CTF-R: 34.55mm

$30.00
SRAM's 506 hub borrows technology from its more expensive brethren to bring you a solid hub at a great price. An aluminum hubshell with hi/lo flanges provide no-nonsense durability and even spoke tension. Dependable cup and cone bearings with polished races roll smooth for the long haul and a strong, steel quick-release axle holds up under pressure.

$119.99
- Elite Series road hubs
- Straight pull and J-bend spoke options
- Sealed bearings
Straight Pull Spoke:
PCD-L: 30.3mm
PCD-R: 30.3mm
LTF-L: 13.1mm
LTF-R: 13.1mm
CTF-L: 36.9mm
CTF-R: 36.9mm
J-Bend Spoke:
PCD-L: 31mm
PCD-R: 31mm
LTF-L: 10.78mm
LTF-R: 10.78mm
CTF-L: 39.22mm
CTF-R: 39.22mm

$69.99
The Vandero hub is back and better than ever. This new PRO version of the Vandero is a precision sealed hub with proven in-bound 3/8-inch axle bolts and two plastic guards.
Features:
- 7075-T6 aluminum hub shell
- 6903RS sealed cartridge ball bearings
- Precision bored fully concentric bearing seats for a smoother spin and prolonged bearing life
- 17mm 7075-T6 aluminum axle with steel helicoil thread inserts
- 3/8-inch heat-treated chromoly axle bolts with 17mm wrench flats and a 6mm hex slot
- Weight: 11.2oz
- Replaceable plastic hub guards included

$189.99
The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong FULL 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec.
Same Clutch coaster hub you’ve come to love, but with a few upgrades.
Features:
- Maximum strength axle design
- Super-durable bearing arrangement throughout
- 2.5mm hex key slack adjustment through hub shell access hole. No wheel removal required.
- Super-durable drag mechanism design
- Crankflip ready
Improvements Over the Clutch V1:
- 14mm chromoly axle bolts on both the drive and non-drive side for greater reliability
- Improved clutch engagement
- Improved manufacturing precision throughout
- More slack than the V1 hub
- All-new durable proprietary plastic spec for the removable hub guard
Specs:
- 36-hole, 2014-T6 aluminum shell
- 9T Driver
- Left or right hand drive
- 22 oz / 623g
Guard Options:
- Plastic hub guard included (but optional to use)
- Alloy hub guard also available

$58.99
• Aluminum hub body
• Quick release
• 100mm OLD
• 20, 24, 28, 32, and 36-hole spoke drilling
• Black or Silver

$168.49
- Singlespeed freecoaster hubs with 9-tooth driver
- Sealed bearings
- Use: Rear
- Gears: Singlespeed w/ 9-tooth driver
- Drilling: 36
- Axle: 14mm
- OLD: 110mm
- Bearing Type: Sealed

$92.99
- Forged aluminum construction
- Sealed Cartridge bearings
- Double contact seals
- 6-bolt disc rotor compatible
- 8/10-speed cassette compatibility
- Quick-release
- 135mm hub spacing

$465.90
Direct power transmission in every riding situation—240 with Ratchet EXP.
With the latest generation of the 240 hubs, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.

$52.99
- Aluminum hubs
- Sealed bearing
- Nutted
- Use: Rear
- Gears: Flip-flop singlespeed freewheel
- Drilling: 36H
- Axle: 3/8-inch
- Material: Alloy
- Brake Type: Rim
- OLD: 110mm
- Bearing Type: Sealed

$139.99
- Forged alloy construction
- Sealed Cartridge bearings
- Double contact seals
- 6-bolt disc
- 12x142mm rear spacing
- Aluminum hub body

$60.99 - $71.99
- Centerlock, 11- speed compatible road hubs
- Sealed bearings keep out contamination and dirt while providing a smooth rotation
- Skewer included
- Spacing / Axle: QR
- OLD: 100mm

$56.99
Sealed cartridge bearing
High flange design w/cut outs
100mm OLD
Lightweight, hollow, heat-treated axle
Black, silver, or white
32 or 36-hole spoke drilling

$85.00
Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical.
We've ridden them on all kinds of bikes from mtb to road and we're in love. They are reliable, dang light and very reasonably priced.
We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release, 12mm, and 15mm endcaps are included.
On all models we spec high-quality made in Japan stainless-steel sealed bearings.
Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity in our modern world.
- Weight: Disc Brake: 164g
- Includes 12mm, 15mm endcaps and quick release skewer
- Non-Drive Side Center To Flange Disc Brake: 21mm
- Drive Side Center To Flange Disc Brake: 36mm
- Non-Drive Flange Diameter Disc Brake: 58mm
- Drive Side Flange Diameter Disc Brake: 45mm

$249.99
- SPANK's HEX DRIVE 102T technology delivers 3.5° engagement, for almost instant pickup
- 6 independent pawls with 3 steps per pawl, work in unison, meaning 18 engagement points per click
- Bite-Block Alloy HG and XD Freehub bodies resist damage from cassettes without the weight penalty of steel
- Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes
- Advanced seal system improves prevention of bearing/drive system contamination

$166.99
Featuring WTP's very own, patented 3-point clutch friction system, the Helix hub will take you backwards in style and hold up to any peg abuse that comes its way.
- Unique internal arrangement with face-bearing clutch stopper
- WTP Patented "Tri-Point" friction system
- Hub Drilling: 32
- Cassette Body Type: Single Cog Driver
- Axle Size: 14mm
- Spoke Interface: J-Bend

$60.00
Track stars and fixed-gear converts will love Surly's Ultra New Front Hub. This gorgeous hunk of aluminum sports sealed bearings for all-weather reliability and low friction. And, the hollow axle is forged from flex-free chromoly for steering precision, long-lasting durability and simple quick-release compatibility.

$70.00 - $75.00
Track stars and fixed-gear converts love Surly's Ultra New Track Rear Hub! This gorgeous hunk of aluminum boasts reliable sealed bearings, and your choice of fixed/fixed or fixed/free gearing. Plus, this hub's 120mm width fits most track frames and the flex-free solid axle is forged from rugged chromoly.

$223.90
The new standard for durability and price.
- Patented Star-Ratchet system
- Contact-free seals and high precision build guarantee smooth bearings
- Press-fit end caps allow tool-free maintenance and conversion

$79.99
- Aluminum hub body
- Sealed bearings
- 6-bolt disc rotor mount
- 15mm thru axle
- 78 x 15mm version: flush axle, no end caps

$225.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM'S 900 hubs are ready for the challenge. On the inside, the smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes
- Fully convertible with tool-free end caps
- BOOST variants
- 24, 28 or 32 spoke holes
Page 1 of 5
Next page