The ForkLift is one of Yakima's most versatile fork-mounted roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It also features quick and easy tool-free installation, a sleek design and a smooth, automotive finish that looks great on any car. The easy-to-adjust sliding wheel tray makes positioning the rear wheel a snap and it’s compatible with most disc brakes.
Go BigStack to go big! Mount up to 4 boats on your roof, or use that room for other gear for a multi-sport adventure. HullGuard padding keeps your boats safe and universal mounts fit nearly any shape crossbar. - Folds when not in use for better aerodynamics - Tool-free installation Fits Yakima round, square, factory, and aerodynamic bars - Top-of-the-line Hullguard padding keeps your boat protected during transport - SteelCore construction uses a steel tube frame for superior strength - Integrated ramp system makes it painless to load your boat - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs Integrated bottle opener - SKS Locks sold separately - Minimum crossbar spreads of 24 inches\u001D or more
Yakima's Universal Mighty Mounts are a simple way to install Yakima accessories on your car's factory racks. The universal design fits almost all factory crossbars.
Versatile water sport carrier that can transport either kayaks or stand-up paddle boards with one system. Features - Multiple ways to carry: Single kayak in J-style or saddle configuration, two kayaks in stacker mode and up to two SUPs in saddle mode - Maximum protection of kayaks and stand-up paddle boards thanks to the thick rubber saddles and padded upright - Easily manage load straps while strapping down the kayaks using the integrated StrapCatch (two sets of load straps with BuckleBumpers and bow and stern tie downs included) - Quickly folds down flat when not in use for better aerodynamics - Fits all rack systems with the universal mounting hardware and quick to install with no tools required - Accommodates kayaks up to 36" wide and a maximum kayak weight of 130 lbs Technical specifications - Load capacity: 130 lb - Dimensions: 32 x 7 x 19 in - Weight: 20 lb - Rubber cover for strap buckle - Length of straps: 2x15' Fits the following Thule crossbars: - WingBar Evo - AeroBlade Edge - AeroBlade - SquareBar - ProBar
Got a Texas-sized SUV equipped with Yakima's MegaWarrior rooftop carrier? Then you may need Yakima's MegaWarrior Extension. It's constructed of heavy-duty, weather-resistant steel and it adds 22 inches and 40% more carrying capacity to Yakima's MegaWarrior rooftop basket (sold separately).
Thule's AeroBlade Edge is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles with a factory roof rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The feet fit your vehicle's roof rails without a fit kit and they're T-track compatible as well.
The SwitchHitter LS is the future-proof solution for those who want a low-profile, roof-mounted option. Compatible with both QR and Thru-Axles up to 15x150, capable of carrying tires up to 3.0-inch, and universal mounting options for cross bars. Integrated cable locks keep your bike safe for those quick trips. The SwitchHitter LS is incredibly versatile, adaptable, and intuitive. It will stay with you as your bike stable evolves. Product Features - Carries 1 bike, up to 35 lbs - Future-proof fork mount for both QR and Thru-Axle. Compatible with 12x100, 15x100, 15x110, and 9x100 quick release (15x150 sleeve available, sold separately) - Tire Width: 19mm road bike tires - 3.0-inch mountain bike tires - Wheel Diameter: 20-inch - 29-inch - Wheelbase: 34-inch - 48-inch - Two fitting options included; Stainless steel mounting straps for wrap around fits most factory, round or square crossbars, and Integrated slotted crossbar mount for Thule Aeroblade & Yakima Jetstream, or OEM Audi, BMW, Mercedes, Mini, Volkswagen and Volvo crossbars - Integrated cable locks secure individual bikes to tray - Lock cores sold separately - On Thule Evo Bars, the slotted hardware plates do not fit and you must use the pre-installed form fitting, stainless steel straps and rear clamp.
Upright bike carrier for the quickest, most convenient mounting-for bikes up to 44 lbs. - Automatically positions your bike when you secure it, thanks to the uniquely designed frame holder and wheel tray. - Quick and easy bike securing – the torque limiter dial controls the force going into the bike frame with a clear sign of correct mounting. - Pressure is spread via large, soft claw pads that adapt to your bike’s frame tubes – minimizing the risk of frame damage. - Safe mounting – your bike is prevented from falling thanks to the claw’s extended lower jaw. - Stable wheels – firmly fixed in smartly designed wheel holders with diagonal quick-release wheel straps. - Easy, tool-free interface for switching carrier from one side of your car to the other. - Mounts on Thule AeroBlade Edge, Thule AeroBlade, Thule SquareBar and round bars.
Transporting tandems has never been easier than with Thule’s Tandem Bike Mount. Its unique pivoting fork mount allows fast, easy, one-person loading and it easily converts to carry single bikes. Boasting a corrosion-resistant aluminum tray, the Tandem Bike Mount includes tough nylon clamps and a stainless-steel skewer, too. It fits on square and round crossbars (sold separately).
Step up to the completely new Yakima bar. Thoroughly wind tunnel tested, the black JetStream’s JetFlow design is exceptionally aerodynamic, incredibly strong, lightweight, and really quiet on the move. The root of a modern rack system, it carries a lot and looks good doing it. - Wind tunnel tested JetFlow™ teardrop shape is strong, quiet and exceptionally aerodynamic - Seamless extruded aluminum construction is light, strong and sleek - JetTruss™ internal support engineering adds serious strength - Materials and construction create a durable bar designed for years of use - T-slot with SmartFill™ push-down infill for easy mount attachment and efficient airflow - JetStream Black - powder-coated alloy finish and high-gloss polymer end caps - JetStream Silver - clear anodized alloy finish and high-gloss polymer end caps - Available in 3 sizes; SM (50”), MD (60”) and LG (70”)
Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)
A premium, universal wheel fork for the new bike axle standards. The universal SpinVice clamp works on most crossbar shapes and is compatible with an SKS lock. - Folds down when not in use - Universal bar attachment with SpinVice clamps - Double wheel retention with axle and ZipStrips - Lockable to crossbars (accepts one SKS lock) - Works with all new wheel and axle sizes TECHNICAL SPECS - Weight: 2.30 lbs - Dimensions: L 19.00” x W 5.00” x H 9.00”
Always forgetting the thru-axle adapter for your roof rack? Kuat solved that problem for you: The TRIO can handle almost any bike you own. The unique mounting system fits quick release as well as 15mm and 20mm thru-axles. It will even play nice with fat bikes with the optional adapter kit (sold separately). The TRIO mounts to most factory and aftermarket crossbars and features an integrated cable lock. - 1 Bike Capacity (45 lbs max) - 3 Way Mount-Fits 9, 15, & 20 mm forks out of the box - Optional adapter kit for fat bikes (sold separately) - Mounts to most factory & all aftermarket cross bars - Integrated Cable Lock (locks both frame and rear wheel) - Sliding rear tire strap - Up to 4 feet between cross bars. - Max crossbar size-3.5” wide by 1.7” thick - Weight-7 lbs - Dims-56” x 4” x 1 3/8”
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
Thule's AeroBlade Edge (Flush Mount) is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles without a factory rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. These flush-mount feet will need a fit kit for your specific vehicle (sold separately).
Heavy-duty aluminum load bars with a unique tri-slot design for fitting of multiple accessories. - Flexible tri-slot design allows use of a range of load accessories independently or in combination - Upper and rear T-tracks are for fast installation/removal of accessories, lower T-track is for connection to roof - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 175cm = 69-inch - 200cm = 79-inch
Thule’s UpRide is a universal upright bike rack with no frame contact, providing fast and secure mounting and maximum frame protection. - Ratcheting wheel strap quickly secures back wheel to tray - Maximum bike weight up to 20 kg. - No bike frame contact is made as the hook securely grabs the front wheel Suitable for bikes with carbon frames - Versatile design accommodates bikes with non-traditional frame designs, rear suspension, and bottle cages - Simple interface for switching carrier from one side of your car to the other - Fits most 20–29” wheel bicycles with tires up to 3" wide (up to 5” with Thule UpRide Fatbike Adapter, sold separately) - Locks the bike to the bike rack and the bike rack to the vehicle (locks sold separately)
Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.
Thule's AeroBlade Load Bars are the strong, silent type. Using a sophisticated BoxBeam construction, they're some of the strongest load bars on the market with a capacity of up to 165 pounds. That's the strong, now for the silent: In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The bars are easy to use, too, thanks to Thule's SmartSlide sytem that makes installation hassle free and their SwingBlade technology that allows full access to the T-slot for easy accessory additions.
This standard J-style cradle delivers superior carrying performance and protection with its 4-touchpoint adjustable padding and rust resistant steel design. - Steel design with adjustable padding for carrying strength and kayak protection - Quick on/off hardware ensures fast installation and removal - Wide mouth J-profile offers easier loading and unloading - Optimally sized J-style carrier leaves roof space for other Thule accessories - AllSurface rust-resistant coating and hardware for longer product life - Carries 1 kayak and requires 1 person to load and unload - 1 to 4 carriers per vehicle - Includes all straps to transport 1 kayak - Accommodates kayaks up to 36” wide and 75 lbs - Requires Thule rack systems crossbars, round bars or factory racks (sold separately) - Primary watercraft: Kayak
Thule's easiest loading canoe carrier with universal roof-rack compatibility - Durable gunwales with ramped sides provide easy loading - Cushioned weather-resistant base padding protects canoe during transit -Strong, durable load straps with buckle bumpers protect car and canoe from scratches - FlipFit bracket fits all Thule Rack Systems, round bars and most factory racks with single reversible mounting bracket - Includes all load straps and bow/stern ratcheting Quick Draw tie-downs necessary to easily secure one canoe
$63.00 - $126.00
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.
Yakima's LoadStop brackets prevent your loads from shifting side to side, without having to stuff a whole bunch of folded-up blankets onto your roof. FEATURES: - Carries ladders and lumber with sturdy L-shaped brackets - Safely holds loads by preventing lateral shifts with grippy ribbed surface - Holds thicker, taller loads with a higher vertical edge - Compatible with Yakima crossbars only - Works well when paired with Heavy Duty Straps (sold separately) - Set of 4 brackets
Loading your boat has never been easier than this! Two front and two rear saddles with integrated rollers will have you and your friends on the water in no time. The spring-loaded base automatically adjusts to boat when loading. - Mounts to any bar type without tools, making installation a cinch. easy loading Fully assembled out of the box - Tool-free installation Fits Yakima round, square, factory and aerodynamic bars Spring-loaded base automatically adjusts to boat when loading - Smooth molded pad hugs and protects multiple boat types - Tilting paddle technology to accommodate an array of boats and roof rack systems - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs - SKS Locks sold separately - Supports one boat up to 80 lbs Minimum crossbar spreads of 24\u001D or more
Yakima's Q-Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The Q-Towers automatically adjust to fit your vehicle's roof contours and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.
- Durable construction for long lasting use - Made from water resistant nylon to help keep contents dry - Easy to attach to roof racks or raised side rails - Fits SportRack Roof Rack Systems, side rails, square, round and most factory racks Medium - 13 cubic feet of cargo 35"(l) x 35"(w) x 18"(h) Large - 15 cubic feet of cargo 37"(l) x 37"(w) x 18" (h)
Thule's XK3 Xsporter Rack Adapter makes your Toyota Tacoma compatible with Thule's revolutionary Xsporter truck bed rack system (sold separately).
The RockyMounts Tomahawk low-profile upright mount that's easy to use and even easier on your wallet. Fat-bike ready out of the box (up to 5" tires), and will hold all styles of bikes, road, mountain, cruiser, and childrens (20 - 29" wheels). Features: - No bike frame contact - simply ratchet the hook over the front wheel and secure the front/rear wheelstraps - Fat bike ready (up to 5" tires) out of the box. Includes two wheel strap extensions - Swingarm easily adjusts for driver side and passenger side installation - Mounts to all styles of crossbars - round, square, factory, aero - Holds all styles of bikes, 20 - 29" wheels (except those with front fenders) - New Easy-Load wheel straps make loading bikes easier than ever - Optional 2-pack locks (sold separately) lock rack to car and bike to rack
The sleekest bike rack ever to rip down I-70. RockyMounts JetLine is a highly crafted fork mount with a low profile and streamlined aluminum head and tray, designed to fit Slotted Crossbars (RockyMounts Ouray, Thule AeroBlade, Yakima Whispbar and JetStream, Rhino Rack Vortex, factory bars from Audi, BMW, Mercedes, Mini, Volvo, VW), Thule Square Crossbars, and Yakima Round Crossbars. The JetLine will hold bikes with a quick-release front wheel and holds skinny road tires up to 2.7-inch mountain bike tires. The simple, long-throw quick-release function allows easy bike loading and unloading. JetLine is compatible with disc and standard brake systems. Lock rack to car and bike to rack with RockyMounts lock cores and keys (sold separately—requires a 2-pack).
Thule's Wheel On solves the problem of where to put your front wheel when your bike is on your roof rack. Plus, it helps keep the inside of your car clean, too.
Page 1 of 3 Next page