Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Handlebars

$235.00
Our Milhouse Handlebar has the distinction of being the first and only of its kind: A full carbon moto-inspired riser bar. Featuring a 16-degree backsweep and 8-degree upsweep for comfort and control, it's tested and approved for getting rad on the roughest terrain. A statement piece for custom builders and upgraders alike, the Milhouse is equally at home on klunkers, bikepacking rigs, singletrack steeds, or simply cruising the streets with style. Trimmable ends marked with easy-to-read graphics allow you to dial in your fit for maximum confidence wherever the trail takes you. - Unidirectional carbon fiber construction - Trimmable ends, made easy with graphic markings - No rider weight limit - ASTM Condition 3 – For rough off-road riding and jumps less than 24" - 90mm clamping area to fit Salsa Anything Cradle - 31.8mm clamp, 70mm rise, 16-degree backsweep, 8-degree upsweep - 825mm wide - Weight: 288g
$145.00
The No.9 35.0 Mountain Carbon Handlebar is designed and built for the most extreme trail and all-mountain riding. The oversized stem clamp adds to front-end stiffness for precise input, while the carbon construction provides vibration damping in a lightweight and durable package. - Unidirectional carbon fiber construction - 35mm stem clamp - 8 degrees of backsweep with 5 degrees of upsweep - Trimmable ends, made easy with graphic markings - Rated to ASTM Condition 4 for extreme off-road riding
$179.99
The Next R handlebar features 800mm of premium unidirectional carbon with the shred-ready positioning of Race Face's SixC bars. DH strength and Enduro weight for when you really need to lean into it. - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - 35mm bar diameter for incredible strength/weight ratio
$60.00
Surly's Open Bar Handlebar is the go-to option for a good time. It features lots of space for grips, shifters, brake levers, or any combination of the a fore mentioned. The swept-back angle is comfortable for your wrists, and the stout chromoly construction is durable yet compliant. It's at home on bike paths or neighborhood cruises, and at an ominous 666mm, it's even wide enough to tackle some singletrack.
$114.99
- DH Race tuned award-winning alloy handlebar design, developed with World Cup professionals - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Increased strength and stiffness compared to conventional alloy bars - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm Features - Key Technologies: Vibrocore, Dual XGT, CNC Bending, Impact Ends, MGR Super 6 Alloy - Material: MGR Super 6 Alloy - Weight: ±340g (15mm) / ± 350g (30mm) / ±360g (50mm) - Sweep: 4° up x 8° back - Finish: Shot peen anodized, decal logos
$118.00
This is Zipp's innovative all-road handlebar, the Service Course SL 70 XPLR. The bar's moniker, XPLR, exemplifies the desire to explore the world with an expanded definition of cycling on a drop bar bicycle—from paved roads onto gravel, mud, dirt, and even single track. The Service Course SL 70 XPLR helps you go faster by placing your body, starting with your hands, in an optimal "comfort zone" position for hours of rough riding over mixed terrain. Today's riders demand a few things out of their cockpit, whether they are doing a two hour training ride from home or a 200 mile gravel adventure: comfort, control, and the ability to carry what they need. We met these needs by creating a bar with shallow and wide drops, specifically focusing on two crucial metrics: outsweep and flare. Outsweep is created by rotating the drop below the brake perch outward. Flare is created by rotating the entire drop above the brake perch outward. - Distinctive Zipp cosmetics - 70mm Reach and 115mm drop allow a comfortable hoods position and a shallow drops postion - 5° drop Flare and 11° drop outsweep creates a drops position 6cm wider than hoods - Ergonomic top with 3° backsweep - Lifetime warranty
$32.95
With a classic 25.4mm clamp diameter, the extra-tall 30mm of rise gives way to comfort and added control for an economic option for any classic mountain bike build. - Material: 6061 alloy - Width: 670mm - Rise: 30mm - Backsweep: 9° - Upsweep: 2° - Clamp diameter: 25.4mm - Bar-end compatible: yes - Weight: 399g
$19.59
- Timeless, classically styled back swept touring bar - Bar end shifter and brake lever compatible - Outward grip angles for proper ergonomics - Material: Steel
$24.99 - $32.99
This mid-rise handlebar provides smooth lines and pure comfort - Black powder coat - 1"(25.4mm) clamp, 5.25" rise, 27" wide - Handmade in Maysville, Kentucky
$80.00
Woodchipper is Salsa’s signature drop bar for off road riding, where its unique shape delivers comfort and control no matter how rough the terrain. Woodchipper Bars bend along three planes to create extra-wide lowers while still maintaining a shallow drop. - Lightweight and strong 7050-T6 series aluminum alloy construction - Ergonomic design works well with integrated road shift/brake levers or bar end shifters - 114mm drop, 56mm reach, 25° flare angle, 38° drop angle - Available in 42, 44, and 46cm widths - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - The Woodchipper’s non-conventional shape requires a unique setup for optimal comfort. The brake/shifter position should be canted downward slightly, resulting in a 20–25° downward angle of the drops. - Weight: 329g (44cm)
$280.00
Whisky's all-carbon Spano Drop Handlebar is designed to give gravel and all-road riders the most natural hand positions anywhere on the bar. A multi-stage flare puts the hoods at an optimal angle for comfort while maximizing control through the drops. The bar's flat top promotes flex and offers relief from rough surfaces, and its 31.8 clamp diameter with 90mm width allows compatibility with bar-mounted accessories, including aero bars. - Available in five widths, measured center-to-center at the hoods: 40, 42, 44, 46, 48cm - Compound flare — 12 degrees at the hoods and 20 degrees through the drops - Drop/Reach: 100mm/68mm - 31.8mm clamp diameter Specifications: - Bar Top Style: Flat - Width Measurement: Center - Bar Clamp Diameter (mm): 31.8 - Accessory Mount Diameter: 31.8 - Bar Reach (mm): 68 - Material: Carbon - Clip-on Compatible: Yes - Bar Drop (mm): 100 - Flare: 20 - Defined Color: Black - Weight: 236 - Drop Bend Style: Compact
$28.39 - $43.09
Lightweight aluminum construction with a versatile riser bar design.
$59.00
On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored handlebar color is available on the Zipp Service Course 70 XPLR, our newest drop-bar offering. The bar's moniker, XPLR, exemplifies the desire to explore the world with an expanded definition of cycling on a drop bar bicycle — from paved roads to gravel, mud, dirt, and even singletrack. The Service Course 70 XPLR helps you go faster by placing your body, starting with your hands, in an optimal "comfort zone" position for hours of rough riding over mixed terrain. Whether on a two-hour training ride from home or a 200-mile gravel adventure, today's riders demand more of their cockpit: comfort, control, and the ability to carry what they need. We met these needs by creating a bar with shallow and wide drops while focusing on two crucial metrics — outsweep and flare. - Bar drops provide a wider, balanced, and secure position with drops that are about 6cm wider than the hoods position for technical or intense riding. - The 70 XPLR features an ergonomic top with an extended 100mm clamping area for computer mounts, aero-extensions, bags, and whatever else you may need for the long haul. - Reach: 70mm - Drop: 115mm
$13.69
• Sturdy, chrome-plated steel construction • Back sweep: 6 degrees
$34.99
Dimension Road handlebars are available in 25.4 and 26.0mm clamp diameters and have double grooves for cable routing.
$29.99
Traditional trekking bar with butterfly bend provides many options for hand positions, making this bar a comfortable choice for touring and recreational cyclists alike. - Designed for City-Trekking use - Not intended for mountain biking - Bar Clamp Diameter (mm): 25.4 - Color: Black - Lever Compatibility: Mountain 22.2 - Weight: 479g - Width: 585mm
$35.00
Velo Orange's Milan bar is so named because it's a great bar for converting an old Italian racing frame with a short top tube. Actually, it's great for converting any frame with a short top tube into a city bike. Folks who like a more aggressive position on a city bike will like it, too. The width is about 570mm and reach is 110mm; there is around 25mm (approximately one inch) of rise. The grips sweep back about 35 degrees, and the grip area is about 170mm long. The clamp area is 25.4mm. The material is polished aluminum alloy. Milan bars work with regular MTB (22.2mm) grips, brakes, shifters, 22.2 inverse brake levers, etc., but not bar-ends.
$129.99
- Award-winning Vibrocore foam core provides vibration-damping, proven to reduce arm pump and hand-numbness - 25° aggressively flared, wide drop bar for true off-road performance and comfort - Short 110mm drop and 65mm reach geometry is perfect for aggressive riding in a more upright, balanced stance - 8mm bar clamp extends through the top section, providing enhanced hand support and comfort without multiple wraps of tape to increase diameter - Round profile upper section facilitates a wide range of rider/hand positions and maximizes grip on the bars in rough terrain - Recommended for: ASTM 3, Gravel Features: - Key Technologies: Vibrocore, On-Off Road Geometry - Material: Zirconium Doped 7-Series Alloy - Width, Hood to Hood (c-c): 420 / 440 / 460 / 480 / 500 / 520mm - Width, Barend to Barend (o-o): 562 / 582 / 602 / 622 / 642 / 662mm - Weight (g): 345 / 350 / 355 / 370 / 375 / 380 - Drop/Reach: 110mm / 65mm (all sizes) - Flare: 25° - Ramp: 14°
$89.99
World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more. - Key technologies: Dual XGT, CNC Bending, Impact Ends, MGR, Super 6 Alloy - Material: MGR Super Six Alloy - Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm) - Diameter: 31.8mm - Rise: 5mm / 15mm / 30mm / 50mm - Length: 800mm (Adjustable to 740mm) - Geometry: 4° up x 8° back - Finish: Shotpeen anodized, decal logos
$184.99
Race Face's flagship carbon DH rated handlebar just got wider. With the push to 820mm the new Sixc 35 handlebar gives unprecedented control at high speed, just what you need for UCI DH races, high speed park laps, or that next challenging AM adventure. Featuring Race Face's tried and true sweep design to get you in the attack position on the bike and uses their UD carbon wrap that gives the Sixc 35 strength you can believe in at a mind numbing 235g. Save weight and gain control? You just lost an excuse… - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - Gold Standard of DH is now wider and stronger - 820mm width for maximum control
$190.00
Simply put, it's the perfect trail bar. The M6 bar is tuned for the dream combination of response, compliance, and high strength. Available in a traditional 25mm rise or a low 7.5mm rise, it sweeps back at 9 degrees and up 5 degrees, providing excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain. - Material: Carbon Fiber - Weight: 200g (25mm rise); 190g (7mm rise) - Bar Width (Max): 780mm - Bar Width (Min): 740mm - Clamp Diameter: 31.8mm - Sweep: 9 Degrees - Tip: 5 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm
$89.99
- Gravel racing-inspired off-road drop handlebar - Double-butted AL6061-T6 construction - 610mm drop width / 460mm top width - 35° flared drops for improved comfort, control, power, and stability - Extended 31.8mm bar bore provides ample room for accessories and clip-on bars - Offers multiple hand positions to address long miles and varied terrain - Accepts bar-end shifters - ISO-Road/Mountain safety certified
$69.99
- Alternative flat bar design - Ergonomic 15º backsweep for improved handling, power output, and comfort - Wide 110mm clamp area for mounting accessories - ISO-Mountain safety certified - Material: AL6061
$78.00
Whisky's No.7 24f is designed for comfort and control in challenging situations. Specifically aimed at long distance touring, gravel, or off-road pursuit, the 24-degree flare offers huge control from the drops. This thoroughly modern drop bar is the perfect match to your off-road tourer, monstercross bike, or get-rad CX rig. The 24f’s sleek design offers seamless transition between positions. Available in a broad size range, there’s a width to perfectly fit your needs. - 7050 Alloy - 282g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 24° - Measured Center-to-Center at the levers
$96.00
FSA's Energy Compact handlebars push aluminum technology as far as it can go. Cutting-edge manufacturing allows us to form and manipulate high-strength 7050 aluminum tubing, varying the wall thicknesses and diameter throughout the bar. There's even an ergonomic flattened section on the tops, either side of the generous central bulge that gives plenty of room to mount accessories. A shallow drop and short reach are ideal for riders looking for a less aggressive riding position. The finish is sandblasted black on the taped areas for grip, with stylish polished anodizing on either side of the stem. - Aerodynamic Integrated Cable Routing (ACR) compatible - Semi-integrated Cable Routing (SCR) compatible - Double butted and tapered AL7050 - 34mm Ergo flat top - 110mm-wide round center section makes it easy to mount accessories - Bar width: center/center from the handlebar tails - Outward Bend: 4°
$99.99
- Aerodynamic integrated Cable Routing (ACR) - Alloy handlebar is designed for Adventure, Gravel and Cyclocross - Sculpted contact points for the "hoods" and "drops" riding positions for better ergonomics - Flared drops for better control and clearance when descending - Stem Clamp Diameter: 31.8mm - 120mm drop, 80mm reach - 15° outward bend - Finish: Bead blasted anodized black - Weight: 292 grams (420mm)
$89.99
Your favorite bars just got bigger, wider, and lighter, Go figure? The magic of 35—believe the hype! Increasing the bar diameter to 35mm allowed Race Face to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness, strength and performance Race Face bars are known for. The ATLAS 35 bar also expands to an 800mm width (Can be trimmed down to 750mm) for hyperspeed control, can you handle it? - Proven design and durability of the Race Face Atlas bar, with increased stiffness and reduced weight of the 35mm bar platform - Requires 35mm bar clamp diameter stem - Full 800mm width that can be trimmed down to a minimum 750mm - 8 degree rearward sweep, 5 degree upward sweep
$99.99
- AL7050-T6 tubular alloy construction - 35mm oversized clamp diameter - 800mm width - 7°/8° back sweep (Depending on rise dimension) - 5° upsweep - ISO-Mountain safety certified - 290-335g (Depending on rise dimension)
$75.00
Combine a proven shape, proven width, proven materials, and a take-no-prisoners approach, and you’ve got the 7050 Descendant riser bar. It’s stiff, tough, dependable, and gives you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Stiff, precise, and super-wide - Made with tough 7050 alloy - Descendant geometry from TruVativ's best enduro rider’s input - Backsweep: 7° - Upsweep: 5°
$69.99
Rock-solid in the park or on the trail, the Spank Spoon 800 handlebar gets a refresh for 2020. With new, fresh graphics, the Spoon bar is now 800mm wide for ultimate control. In addition, you can dial in your fit with the ability to cut it down to 740mm for a wide variety of uses. Spank Spoon: the best-priced handlebar on the market without compromise! - Cost-effective upgrade to your 31.8mm cockpit without sacrificing quality - Freeride inspired all-mountain geometry makes the bar extremely versatile - Shot-peening and anodizing enhances fatigue life - Dial your fit—adjustable to 740mm - Recommended for: ASTM 5, All mountain, trail, free ride, DH, E-Bike
Page 1 of 11 Next page