- Reversible 6061 aluminum arms for left or right cable routing - Quick-release noodle is lined with Teflon for smooth action - High tension square wire springs - Thinline threaded pads with easy-to-adjust arm hardware - Made in USA
Pro Semi-Metallic pads feature a lightweight aluminum backing plate attached to the same quiet and high-performance compound found on Jagwire's Sport Semi-Metallic series disc pads. Weight is reduced by nearly 50%. These pads are perfect for cross-country applications.
The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes
Avid takes entry level to a whole new level with the BB5s, which feature ball bearings (where the BB comes from in the name), a melt-forged body and a CleanSweep rotor for excellent stopping power and awesome durability. Plus, an inboard pad adjustment knob lets you dial in the perfect distance between the rotor and the pads, while Avid's ingenious Tri-Align caliper-positioning system perfectly aligns the pads parallel to the rotor in seconds. And, the tool-free pad replacement and adjustment makes quick work out of accommodating for pad wear, so you always have positive, powerful braking.
$81.00 - $87.00
Avid's BB7 is the mechanical-disc brake that raises the bar. It boasts dual pad-adjustment knobs and Avid's ingenious Tri-Align caliper-positioning system so you can dial in perfect braking in seconds. The BB7 also utilizes precision actuation and variable spring tension to give you serious stopping power and out-of-this-world modulation. And, this setup comes with Avid's CleanSweep rotor for consistent, powerful braking and tool-free pad replacement for easy maintenance.
Cost effective stopping power from the leader in cable-actuated disc brakes. - All calipers have 74mm mounting bolt spacing - For use with with long cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Includes steel-backed organic pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Rotor Included: No - Weight: 215 g
The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance. - All calipers have 74mm mounting bolt spacing - For use with long cable-pull levers - Pad retraction and spring tension are adjustable - Includes steel-backed sintered pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No
Add a rear disc brake to your 2001 and later Trek, Klein or Gary Fisher bicycle with this International Disc Brake Mount. Please note, disc brake and disc compatible wheel hub sold separately.
$9.95 - $24.95
- Cold forged, CNC-machined cartridge body with self-aligning pivoting posts - Triple-compound 70mm pads
Guide RE is SRAM's optimized braking solution for today's exciting category of E-MTBs, capable of handling the higher average speeds, more intense use and increased mass due to the presence of the motor and battery. It combines SRAM's proven Guide R lever assembly with a powerful 4-piston caliper derived from the gravity-focused Code brakes. The Guide RE provides real, usable on-trail control—optimal power and modulation mean speed can be controlled in all terrain and in all situations, both uphill and downhill. - Guide R lever assembly with proven Guide technologies - Powerful 4 piston caliper derived from the Code gravity specific brakes - Sintered pads for better pad life in intensive use - MatchMaker X compatible - Ambidextrous lever mount - Tool-free reach adjust - Weight: 415 grams (based on direct mount, 800 hose, 160mm CL Rotor) - Lever Material: Aluminum - Caliper Design: 4 piston caliper derived from the Code gravity specific brakes - Finish: Gloss black - Pad: Steel-backed metal sintered - Fluid: DOT 5.1 - Mount: Ambidextrous - Adjustment: Tool-free Reach Adjust, Banjo Adjust - Pivot: Bushing
High-density organic compound for extended pad life - Suitable for light use applications - Good performance at low temperatures - Low rotor wear - Extremely quiet - Pad material: steel - Compound: organic - Compatibility: Formula Oro Series
Compatible with linear-pull and cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability. They come in standard Black plus Yellow, Red, Pink, Blue and Gray for adding a little style to your ride.
- Plastic clip prevents pistons from pressing in while wheel is off of the bike - Fits: Marta, Louise, Clara, Julie
This individual left Microshift ADVENT brake only drop bar lever matches other externally-routed microSHIFT drop bar shifters for a clean aesthetic.
$24.99 - $27.99
Jagwire's Road Pro Brake Pads fit Campagnolo, Shimano and SRAM sidepull brakes. They feature Jagwire's tried-and-true Pro Series compound for excellent braking and durability. The pads are cartridge-style for easy pad replacement without losing your brake shoe position. And there are wheel guides on the shoes to help when you're putting a wheel back on.
Kool-Stop disc pads are made with organic materials that are blended and bound together using a resin. The compounds do include small amounts of metal to improve the braking formula but though this is a mined material the pads are largely organic. The term semi metallic can also be used. Kool-Stop has found during testing that their disc pads are rotor-friendly and provide high performance braking throughout the life of the pad. - Qty 1 = enough for 1 wheel
Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistent braking power. - Qty 1 = enough for 1 wheel
Characteristics: - long lasting, high endurance pad compound - very easy modulation of braking force - high temperature stability for consistent brake power - organic formula is low noise and rotor friendly Fits: Avid: - Elixir 9,7,5,3,1,CR,R SRAM: - XX - XO - DB 5,3,1 - Level TL,T,Level
Improve your braking in dry and wet conditions with Origin-8's Pro-Force Threaded-Post Pad Set. They fit most linear-pull (also called "direct-pull") brakes and boast a grippy dual-compound material with channels to shed water for excellent performance and long life. They are also designed to reduce noise.
Suitable for heavy use applications - Excellent in extreme weather conditions - Superior performance at high temperatures - Virtually unaffected by rain or snow - Exceptional pad life - Pad material: steel - Compound: sintered - Compatibility: Shimano M975, M966, M965, M800, M776, M775, M765, M665, M655M, M601, M596, M595, M585, M545, M535, R505, S500, S501, T605, T665 TRP Dash, Parabox Front
$13.49 - $21.99
Jagwire's Road Sport Brake Pads feature their tried-and-true Pro Series compound for excellent braking and durability. The pads are cartridge-style for easy replacement without losing your brake shoe position and there are wheels guides on the shoes to help when you're putting a wheel back on.
Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions.
The Campagnolo 03 rotors were designed to ensure optimal resistance to overheating, thus guaranteeing greater braking capability even in the most critical situations. - Designed to be used with Center Lock or AFS systems - Feature a rounded UCI compliant edge for safety and easy insertion into calipers
- 55mm brake pad inserts for Origin8 Vise road cartridge brake pads - Advanced carbon rim braking compound provides superior performance in both dry and wet conditions - Automatic toe-in alignment
High performance Kevlar, Ceramic, Brass and resin composite material. Provides excellent brake power with minimal effort at the brake lever. Performance is consistent in both wet and dry conditions and pad life is excellent. High quality springs included with every set (where applicable). Fits: Formula - RO Racing - T1 Racing - R1 Racing - R1 - C1 - CR3 - T1 - RO - Mega - The One - RX - RR1 - CURA
$20.00 - $40.00
MisMatch adaptors allow users to mount Shimano & SRAM brakes and shifters on one clamp. Available in multiple configurations. Annodized Black Attaches Shimano I-Spec II shifters to SRAM MatchMaker brake lever clamps
Converting from V-brake to disc? Plug the holes with Origin-8 Boss Plugs. Boss plugs provide a finished look to your brake conversion while also preventing moisture and debris from getting into your bike. - Fits into fork brake boss holes for V-brake to disc conversion
- 55mm brake pad inserts for Origin8 Vise road cartridge brake pads - Advanced alloy rim braking compound provides superior performance in both dry and wet conditions - Automatic toe-in alignment - Length of Pad: 55mm - Compound: All Weather
With a copper plated back plate, Kool-Stop sintered metal disc brake pads are designed to give your bike performance braking in extreme conditions, e.g. XC, downhill, trials and dual slalom riding. The pads have a quick break-in period so you get maximum performance during those demanding rides when stopping power, durability and long pad life are required.
$12.50 - $13.50
The BMX Pad is a top choice for BMX bikes' direct pull brakes. The curved design allows this longer more rigid pad to contour the rim for better brake performance. Features: - Hardened and plated reinforced steel backbone - Patented angled tip plow - Water grooves - Knurl-lock washer system - Available only in Threaded COLORS - Kool-Stop's colored pads are a semi-aggressive compound that will give you good performance in all weather conditions Salmon - Kool-Stop's most famous Salmon compound is also one of their most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. Specifications: - Weight per pair: 61.7 grams - Overall length: 78.5 mm - Pad contact width: 8.5 mm
Page 1 of 19 Next page