Wheels

- Versatile aero wheelset for the modern road bike with tubeless and hookless rim profile - Optimized tire bed for easy tire installation - Wide 23mm rim profile creates a better tire interface to be fast on or off the road - New ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - Ships with 12mm front and rear end caps - Center locking rotor interface. Lockring is included with the wheels - 1470g - Lifetime warranty

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs Specs: - Wheel Tire Type: Tubeless Ready - Wheel-Brake Comp.: Disc IS 6-bolt - Rim Material: Aluminum - Spoke Type: Sapim D-Light - Valve: Presta - Rim Construction: Double wall

- Rims: EVO Tour 20 - 26'' (ETRTO 559) - Inner width: 19.8 mm - Recommended tire size range: 26" x 1.5'' to 2.25'' - Anodized black finish - Pinned joint - Drilled for Schrader valve - 36 holes - Rear hub (041820-02-26): Alloy, Sealed, Freewheel, Quick Release, Hollow CrMo axle M10x135mm - Rear hub (041820-03-26): Alloy, Sealed, Shimano HG compatible Freehub, Quick Release, Hollow CrMo axle M10x135mm - Anodized black finish - Adjustable bearings - Quick Release Binders Included - Assembled in North America by experienced wheel builders using Sapim 14G Stainless Steel spokes and 14mm Brass Polyax Nipples

Reserve 30 wheels feature a 30mm internal width that supports 2.3-2.5" tires, and the thick rim beads stand up to the abuse of tough, rocky, steep tracks ridden at elite speed. While DH rims see greater single impacts, nothing beats the full weekend of regular abuse that an EWS race dishes out. To say nothing of the infamous 'Anti-Grip' and the rocks buried within the moondust in the Andes of Chile. - Designed for DH riding and racing - Carbon fiber construction with 4mm asymmetric offset - Reinforced rim bed for impact resistance - Rated for e-bike use - Ships with rim tape installed, tubeless-ready valves, and cards identifying the builder of each of your wheels - Backed by a lifetime warranty

Today's XC race machines are marvels of modern engineering, evolved to decrease weight while improving ride quality and durability, with the idea to carry the world’s best athletes to the top step of the podium.The Reserve 28 XC is the race-ready culmination of everything learned from years at the highest levels of competition, and it delivers on a heap of promises. At a genre blurring 1300g for a complete wheelset (with no rider weight limit and our market-defining lifetime warranty), the 28 XC features a wider and lower rim profile to increase strength and lateral rigidity, while adding vertical compliance for enhanced traction. - Designed for XC riding and racing - Carbon fiber construction with 2.8mm asymmetric offset - Step-in internal rim bed to ease tubeless installation - Lower profile for added lateral stiffness with increased vertical compliance - Ships with rim tape installed, tubeless-ready valves, and cards identifying the Santa Cruz builder of each of your wheels - Backed by Santa Cruz lifetime warranty

Find the road less travelled on the new EA70 AX. Joining forces with the EA70 and EC70 AX Bar in our AX adventure road line, the new EA70 AX wheel has the durability to withstand trail riding but is translated to drop bar applications with center lock hubs and 11-speed road compatibility. From bikepacking adventures loaded with gear, to washboarded gravel descents with only your wheels and tires providing the compliance, we have you covered. The welded tubeless ready rim boasts a generous 24mm internal rim width that increased tire volume and gives an optimal tire profile for 35 to 50C tires. It’s the perfect wheel to round out any adventure drop bar build.

Disc brakes have arrived in road cycling. They’re proven in mountain and cyclocross, and with the new EC90 SL Disc wheels combined with the latest brake systems, there are no longer any compromises associated with going disc. The EC90 SL takes the proven Fantom rim shape and scales it down to a shallower 38-millimeter depth. The EC90 SL Disc is available in tubular or certified Road Tubeless carbon clincher and are entirely built by hand from start to finish and acoustically tuned. These wheels combine top-end materials, a methodical build and the proven M1 6-bolt disc hubset. Best of all, these wheels are future proof, they can convert to 15x100 & 12x100; parts sold separately.

The EC70 AX wheels connect EC70 carbon rims to our proven X5CL hub with 28 3x double butted Sapim straight pull spokes. End cap and axle components are available for all major industry standards. Wide, 24mm internal rims are optimized for gravel tires 35mm and larger, giving you a more confident tire stance for control on the ground during your expansive adventure rides, single track forays and unrelenting gravel races. Our Easton Overland team and SDG Muscle Monster team riders have put these wheels to the test, racing prototypes at DK200, with Amity Rockwell taking the DK Queen title and Amanda Nauman finishing 6th, while at Lost and Found 2019 Michael Van Den Ham came in 4th and Craig Richey took 6th.

Fat bikes have opened the eyes to many riders regarding where and how bicycles can be ridden. The XM 1501 SPLINE 35 carries the genes of fat in a lightweight trail package. It is the perfect fit for 2.6-inch tires. Fit to a modern trail bike, it opens up unknown possibilities: That slippery off-camber root section all of a sudden is looking a lot less intimidating. With our industry leading material and manufacturing know-how DT made sure that this wheel, despite it's built-in rowdiness, comes to you in a lightweight and durable package, ready for many all-mountain adventures.

Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Flow S1 Wheelset - Use: Aggressive Trail, All Mountain, Enduro, and Downhill - Internal Rim Width: 29mm - Optimal Tires Size: 2.35 to 2.8-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 27.5-inch (2,034g), and 29-inch (2,134g)

The all-new Rapide CL II wheelset brings the Rapide CLX II’s speed, efficiency, incredible handling, and stability in any conditions to more riders. Built on the exact same rims as the Rapide CLX II to elevate all this performance with tubeless-done-right technology, the Rapide CL II makes that performance easier to catch at check-out and you almost impossible to catch on the open road. - Tire Size: 24mm - 38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm – 38mm: Tubeless (60psi) Tubed (60psi). - Weight: Rear 865g (including 15g, tubeless rim tape and tubeless valve). - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - System Weight Limit: 275lbs / 125kg

CZR i23 gravel wheels are designed to minimize weight while blending stiffness and compliance to maximize power transfer and increase comfort. CZR i23 rims feature a 24mm section depth to maximize energy transfer, reduce weight, improve vertical compliance, and reduce rider fatigue while a hooked bead also improves tire retention with high pressure adventure road and gravel tires. CZR I23 CARBON RIMS Reinforced spoke beds improve overall wheel strength and durability while also minimizing weight in areas where less strength, and therefore material, is needed. CZR i23 rims feature 3mm of asymmetrical spoke offset and a 24mm section depth to improve radial stiffness and maximize energy transfer without being affected by crosswinds like other wheels with deeper profiles. SOLID STRIP & TCS TAPE Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke. 2-CROSS OR 3-CROSS LACING CZR i23 gravel wheels with 24 spokes feature a 2-cross lacing pattern to increase radial stiffness and decrease weight. CZR i23 wheels with 28 spokes feature a 3-cross pattern to increase durability while still providing ample radial stiffness due to the additional spokes. FREQUENCY HUBS The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement. Frequency hubs laced to CZR i23 wheels feature lightweight pawl springs that minimize drag and therefore improve efficiency for drop-bar usage. AERODYNAMIC WING SPOKES Pillar racing spokes that are cold-forged into an aerodynamic wing shape that reduces drag at the trailing end of each spoke. As a result, wing spokes improve overall efficiency while still retaining the gram-conscious weights of traditional bladed spokes. SAPIM ALLOY NIPPLES All CZR i23 wheels feature time-tested Sapim alloy nipples to further reduce overall wheel weight while still exceeding the durability requirements of gravel. COUNTLESS CONFIGURATIONS CZR i23 wheels are available in a 24-spoke option for riders looking to minimize weight and increase compliance, while the 28-spoke versions are best for heavier or more aggressive riders who prioritize stiffness and durability. All CZR i23 wheels are available with Centerlock or 6-bolt rotor mounts. CZR i23 front wheels use a 12x100mm Frequency hub, but 15mm end caps are also available separately on our Replacement Hub Parts page. WHY CHOOSE CZR I23? Fast and light CZR i23 gravel wheels were designed to minimize weight and maximize compliance on rough gravel roads. With front-wheel weights starting at 620g and rears at 775g, they also deliver the greatest strength-to-weight ratio of any gravel wheelset on the market. We even stand behind them with our Ride With Confidence Guarantee for those few-and-far-between crash replacement cases. Read below for more info.

Sta-Tru Double Wall Rear Wheels. - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Valve: Schrader - Tire Type: Clincher

- Position Rear - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 135mm - Wheel-Brake Comp. Rim - Freehub Body Freewheel - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 18.4mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 36 - Hub Model Formula FM-31-QR - Wheel Weight - - Spoke Type Stainless - Valve Schrader - Rim External Width 24.4mm - Depth 16mm - Rim Model Alex DM18 - Skewers Included Yes

Sta-Tru Wheels ST735 silver anodized alloy single wall rims - Hybrid rim with an attractive rim profile developed for Sta-TruWheels, Inc - KT ATB 9mm/100/108 axle - Silver stainless spokes

Proterra Tough i30 wheels keep the trail in check while everything else blurs by in the periphery. Reinforced by our proven Dual I-Beam support, Proterra Tough rims feature a 30mm internal width to provide higher tire volume while also increasing sidewall support at lower pressures. High-quality EZO sealed bearings are designed to endure through seasons of aggressive riding, while a responsive 6-pawl freehub provides the snappy 3.7 degrees of engagement you demand when cranking out of corners. Choose Proterra Tough when you need a wheel that won't let you down. - 30mm inner rim width with 32 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge brass nipples provide bomber durability, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - 6-bolt rotor mounts - Top-tier EZO sealed bearings

- The Ultra-light carbon XC wheel - Hookless rim wtih an internal width of 26mm, mates perfectly with fast rolling cross-country tires ranging from 2.1” to 2.4”. - Quest Disc MTB hubs (120 grams for the front and 245 grams for the rear) with their super quick five-degree engagement, tool free service and centerlock spline for disc brake rotors. - Pillar Wing 20 J-Bend spokes and alloy nipples are laced double-cross with 24 spoke front and 28 spoke rear. - The ultra-light, yet durable, 370-gram rim measures 26mm internal, featuring a 2.8mm offset rim bed for better tension balance and a more responsive wheel build. - These specs total up to a 1380-gram wheelset that has a modern day wider rim design and can handle the rigors of cross country mountain bike riding.

- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

Double wall 32 hole alloy rims - CNC machined sides and single stainless eyelets - KT alloy black MTB style hub - Stainless steel spokes

- 30mm wide rim with an Enduro style layup. Designed for tires in the 2.4 to 2.7 range. - Offset rim bed for balanced spoke tension. - Tripel hub with quick 3.5 degree engagement, and super low drag. - Super strong hookless rim.

- Position Front - Wheel Diameter/ISO 700C / 622 - Axle Type Bolt-on - Hub Spacing 100mm - Wheel-Brake Comp. Rim - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 19mm - Rim inner width range 0-21.9mm - Rim Color Silver - Rim Drilling 32 - Hub Model Formula TH-50 - Wheel Weight - - Spoke Type Stainless - Valve Presta - Rim External Width - - Depth 35mm - Rim Model Evo E-Tour 19

Rims: WTB HTZ i30 27.5" - ETRTO 584-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Front hub: Shimano HB-MT400-B Boost - 15x110mm (Axle not included) - Center Lock (6-Bolt adapter included) - Angular contact bearings - Contact sealed hub Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), 14mm Brass Polyax Nipples (Black)

- Rims: WTB ST i23 (Black), inner width: 23 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub: Shimano FH-M4050 (Black), Shimano logo, M10x135mm - HG Freehub compatible with 8—10, MTB 11-speed - Center Lock disc mount - Adjustable bearings - Rear Quick Release binder included - Front E-THRU Axle not included - Assembled in North America by experienced wheelbuilders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Valve and Tape not included)

- Rims: WTB ST i30 (Black), inner width: 30 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress-free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub: Shimano FH-MT400-B (Black), Shimano logo, 12mm E-THRU, O.L.D. 148mm BOOST - HG Freehub compatible with 8—10, MTB 11-speed - Quick Engagement Pawl Ratchet (36T / 10deg engagement) - Center Lock disc mount - Adjustable bearings - E-THRU Axles not included - Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Tubeless Valve included)

- Position Front - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 100mm - Wheel-Brake Comp. Rim - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 19mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 32 - Hub Model Shimano Acera HB-T3000 - Wheel Weight - - Spoke Type DT Stainless - Valve Presta - Rim External Width 24mm - Depth 17.5mm - Rim Model Mavic A119 - Skewers Included Yes

Rims: WTB HTZ i30 29" - ETRTO 622-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Rear hub: Shimano FH-MT410-B (Boost, MS) - Center Lock (6-Bolt adapter included) - Quick Engagement Freehub, 36 Points of Contact, 10 deg. engagement - HG compatible Shimano 11spd and Sram NX / SX splined 12spd (10spd and below needs spacer) - MS compatible 12 Spd Shimano Micro Spline only Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), 14mm Brass Polyax Nipples (Black)

- Position Front - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 130mm - Wheel-Brake Comp. Rim - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 19mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 36 - Hub Model Shimano Deore HB-T610 - Wheel Weight - - Spoke Type DT Stainless - Valve Presta - Rim External Width 24.5mm - Depth 20mm - Rim Model Mavic A719 - Skewers Included Yes

Rims: WTB CZR i30 Carbon 29" - ETRTO 622-30 - Inner width: 30mm - Made from Torayca T700 UD carbon fiber, striking a fine balance between stiffness and compliance - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Externally reinforced spoke bed - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip (included) - 32 holes Front hub: Sram 900 Boost - 15x110mm Thru-Axle (Axle not included) - 6 Bolt Disc Mount - Sealed cartridge bearings Rear hub: Sram 900 XDR Boost - 12x148mm Thru-Axle (Axle not included) - 6 Bolt Disc Mount - Sealed cartridge bearings - Sram Double Time 4-Pawl Ratchet Freehub, 52 Points of Contact, 6.9 degree engagement angle - Compatible with 11,12 speed XD (1.85mm spacer included) Sold in Pair, including: - Tubeless Valve (x2) Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), 14mm Brass Polyax Nipples (Black)

- Laced with Sapim Laser triple-butted spokes and mechanically locking alloy nipples. - M-pulse Hub - RiACT system absorbs impacts and rolls faster - Bead Socket Technology for unmatched tubeless performance - WideRight rim design optimized for 2.00"-2.25" XC and Trail tires

29er Speed Tuned wheel assembled in the USA - STW Speed Tuned 29er shinning black anodized alloy double-wall rims w/ 32 holes - Includes stainless steel eyelets and V-brake compatible sidewalls - Stainless steel black spokes for a solid all black appearance - Formula 6-bolt disc